diff mbox

[1/4] arm: dts: rockchip: add the cec clk for dw-hdmi on rk3288

Message ID 20171020100734.17064-2-hverkuil@xs4all.nl (mailing list archive)
State New, archived
Headers show

Commit Message

Hans Verkuil Oct. 20, 2017, 10:07 a.m. UTC 
From: Hans Verkuil <hans.verkuil@cisco.com>

The dw-hdmi block needs the cec clk for the rk3288. Add it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 arch/arm/boot/dts/rk3288.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Heiko Stuebner Oct. 21, 2017, 7:29 p.m. UTC | #1 
Am Freitag, 20. Oktober 2017, 12:07:31 CEST schrieb Hans Verkuil:
> From: Hans Verkuil <hans.verkuil@cisco.com>
> 
> The dw-hdmi block needs the cec clk for the rk3288. Add it.
> 
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

applied for 4.15, after s/arm:/ARM:/ in the subject


Thanks
Heiko
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 356ed1e62452..a48352aa1591 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1124,8 +1124,8 @@ 
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
-		clock-names = "iahb", "isfr";
+		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
 		status = "disabled";