[v2,1/2] dt-bindings: add bindings doc for hi3798cv200 combphy

Commit Message

Shawn Guo Oct. 23, 2017, 11:26 a.m. UTC

From: Jianguo Sun <[e-mail]>

It adds the device tree bindings for PCIE/SATA/USB3 combo PHY found on
HiSilicon STB SoCs.

Signed-off-by: Jianguo Sun <[e-mail]>
Signed-off-by: Shawn Guo <[e-mail]>
---
 .../bindings/phy/phy-hi3798cv200-combphy.txt          | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt
new file mode 100644
index 000000000000..5fd548f078f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt
@@ -0,0 +1,19 @@ 
+HiSilicon STB PCIE/SATA/USB3 PHY
+
+Properties:
+- compatible: Should be "hisilicon,hi3798cv200-combphy"
+- #phy-cells: Should be 1.  The cell number is used to select the phy mode
+  as defined in <dt-bindings/phy/phy.h>.
+- clocks: The phandle to clock provider and clock specifier pair.
+- resets: The phandle to reset controller and reset specifier pair.
+- hisilicon,peripheral-syscon: The phandle to the peripheral controller.
+
+Example:
+
+combphy1: phy {
+	compatible = "hisilicon,hi3798cv200-combphy";
+	#phy-cells = <1>;
+	clocks = <&crg HISTB_COMBPHY1_CLK>;
+	resets = <&crg 0x188 12>;
+	hisilicon,peripheral-syscon = <&peri_ctrl>;
+};