[13/13] dt-bindings: iio: health: Add MAX30105 support to max30102.txt
diff mbox

Message ID 1509132593-1815-19-git-send-email-pmeerw@pmeerw.net
State New
Headers show

Commit Message

Peter Meerwald-Stadler Oct. 27, 2017, 7:29 p.m. UTC
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Rob Herring <robh+dt@kernel.org>
---
 Documentation/devicetree/bindings/iio/health/max30102.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
index 8629c18..ef2ca0a 100644
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -1,9 +1,11 @@ 
 Maxim MAX30102 heart rate and pulse oximeter sensor
+Maxim MAX30105 optical particle-sensing module
 
 * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
+* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
 
 Required properties:
-  - compatible: must be "maxim,max30102"
+  - compatible: must be "maxim,max30102" or "maxim,max30105"
   - reg: the I2C address of the sensor
   - interrupt-parent: should be the phandle for the interrupt controller
   - interrupts: the sole interrupt generated by the device
@@ -12,8 +14,10 @@  Required properties:
   interrupt client node bindings.
 
 Optional properties:
-  - maxim,red-led-current-microamp: configuration for RED LED current
+  - maxim,red-led-current-microamp: configuration for red LED current
   - maxim,ir-led-current-microamp: configuration for IR LED current
+  - maxim,green-led-current-microamp: configuration for green LED current
+    (max30105 only)
 
     Note that each step is approximately 200 microamps, ranging from 0 uA to
     50800 uA.