diff mbox

[04/27] clk: ti: clkctrl: use fallback udelay approach if timekeeping is suspended

Message ID 1509368685-29112-5-git-send-email-t-kristo@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tero Kristo Oct. 30, 2017, 1:04 p.m. UTC
This will happen on certain platforms when entering / leaving suspend
and the system attempts to disable certain clocks at very early/late
phase, burping out a warning from timekeeping core. Avoid the issue
by checking if the timekeeping is suspended and using the fallback
udelay approach for checking timeouts.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/ti/clkctrl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Stephen Boyd Nov. 3, 2017, 3:43 p.m. UTC | #1
On 10/30, Tero Kristo wrote:
> This will happen on certain platforms when entering / leaving suspend
> and the system attempts to disable certain clocks at very early/late
> phase, burping out a warning from timekeeping core. Avoid the issue
> by checking if the timekeeping is suspended and using the fallback
> udelay approach for checking timeouts.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  drivers/clk/ti/clkctrl.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
> index 284ba449..91ddc92 100644
> --- a/drivers/clk/ti/clkctrl.c
> +++ b/drivers/clk/ti/clkctrl.c
> @@ -21,6 +21,7 @@
>  #include <linux/of_address.h>
>  #include <linux/clk/ti.h>
>  #include <linux/delay.h>
> +#include <linux/timekeeping.h>

>  #include "clock.h"
>  
>  #define NO_IDLEST			0x1
> @@ -90,7 +91,7 @@ static bool _omap4_is_ready(u32 val)
>  
>  static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout)
>  {
> -	if (unlikely(_early_timeout)) {
> +	if (unlikely(_early_timeout || timekeeping_suspended)) {
>  		if (time->cycles++ < timeout) {

This would be the second user of timekeeping_suspended outside of
timekeeping core. Why don't we just udelay(1) every time we call
this function? The loop on ktime without any sort of delay in it
may actually spin faster, especially because we can't get
interrupted here (irqs are off). And irqs + preemption enabled is
typically where you would want to use ktime instead of counting
udelay() calls to see if you hit a timeout.

This code seems over-complicated given the constraints at the
call-sites.
Tero Kristo Nov. 6, 2017, 7:33 a.m. UTC | #2
On 03/11/17 17:43, Stephen Boyd wrote:
> On 10/30, Tero Kristo wrote:
>> This will happen on certain platforms when entering / leaving suspend
>> and the system attempts to disable certain clocks at very early/late
>> phase, burping out a warning from timekeeping core. Avoid the issue
>> by checking if the timekeeping is suspended and using the fallback
>> udelay approach for checking timeouts.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   drivers/clk/ti/clkctrl.c | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
>> index 284ba449..91ddc92 100644
>> --- a/drivers/clk/ti/clkctrl.c
>> +++ b/drivers/clk/ti/clkctrl.c
>> @@ -21,6 +21,7 @@
>>   #include <linux/of_address.h>
>>   #include <linux/clk/ti.h>
>>   #include <linux/delay.h>
>> +#include <linux/timekeeping.h>
> 
>>   #include "clock.h"
>>   
>>   #define NO_IDLEST			0x1
>> @@ -90,7 +91,7 @@ static bool _omap4_is_ready(u32 val)
>>   
>>   static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout)
>>   {
>> -	if (unlikely(_early_timeout)) {
>> +	if (unlikely(_early_timeout || timekeeping_suspended)) {
>>   		if (time->cycles++ < timeout) {
> 
> This would be the second user of timekeeping_suspended outside of
> timekeeping core. Why don't we just udelay(1) every time we call
> this function? The loop on ktime without any sort of delay in it
> may actually spin faster, especially because we can't get
> interrupted here (irqs are off). And irqs + preemption enabled is
> typically where you would want to use ktime instead of counting
> udelay() calls to see if you hit a timeout.

It actually was originally just udelay() but I changed it to use the 
ktime_get() approach way back due to comments provided on some early 
revisions of this patch. See: https://patchwork.kernel.org/patch/7884371/

> 
> This code seems over-complicated given the constraints at the
> call-sites.
> 

True, I can easily change it to just use udelay() if wanted.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Boyd Nov. 6, 2017, 10:18 p.m. UTC | #3
On 11/06, Tero Kristo wrote:
> On 03/11/17 17:43, Stephen Boyd wrote:
> >On 10/30, Tero Kristo wrote:
> >>@@ -90,7 +91,7 @@ static bool _omap4_is_ready(u32 val)
> >>  static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout)
> >>  {
> >>-	if (unlikely(_early_timeout)) {
> >>+	if (unlikely(_early_timeout || timekeeping_suspended)) {
> >>  		if (time->cycles++ < timeout) {
> >
> >This would be the second user of timekeeping_suspended outside of
> >timekeeping core. Why don't we just udelay(1) every time we call
> >this function? The loop on ktime without any sort of delay in it
> >may actually spin faster, especially because we can't get
> >interrupted here (irqs are off). And irqs + preemption enabled is
> >typically where you would want to use ktime instead of counting
> >udelay() calls to see if you hit a timeout.
> 
> It actually was originally just udelay() but I changed it to use the
> ktime_get() approach way back due to comments provided on some early
> revisions of this patch. See:
> https://patchwork.kernel.org/patch/7884371/
> 

Ok, so we use ktime to spin faster on the bit than udelay() would
allow us to. That looks to be on purpose because udelay(1) is too
long between bit checks.

What is causing us to call this path after timekeeping has been
suspended? Please add some more specifics to the commit text so
we know exactly where it's happening. Also add a comment above
the if statement describing why we're checking the variable so it
isn't buried in commit text somewhere and Cc timekeeping
maintainers on the patch please.
Tero Kristo Nov. 7, 2017, 7:06 a.m. UTC | #4
On 07/11/17 00:18, Stephen Boyd wrote:
> On 11/06, Tero Kristo wrote:
>> On 03/11/17 17:43, Stephen Boyd wrote:
>>> On 10/30, Tero Kristo wrote:
>>>> @@ -90,7 +91,7 @@ static bool _omap4_is_ready(u32 val)
>>>>   static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout)
>>>>   {
>>>> -	if (unlikely(_early_timeout)) {
>>>> +	if (unlikely(_early_timeout || timekeeping_suspended)) {
>>>>   		if (time->cycles++ < timeout) {
>>>
>>> This would be the second user of timekeeping_suspended outside of
>>> timekeeping core. Why don't we just udelay(1) every time we call
>>> this function? The loop on ktime without any sort of delay in it
>>> may actually spin faster, especially because we can't get
>>> interrupted here (irqs are off). And irqs + preemption enabled is
>>> typically where you would want to use ktime instead of counting
>>> udelay() calls to see if you hit a timeout.
>>
>> It actually was originally just udelay() but I changed it to use the
>> ktime_get() approach way back due to comments provided on some early
>> revisions of this patch. See:
>> https://patchwork.kernel.org/patch/7884371/
>>
> 
> Ok, so we use ktime to spin faster on the bit than udelay() would
> allow us to. That looks to be on purpose because udelay(1) is too
> long between bit checks.
> 
> What is causing us to call this path after timekeeping has been
> suspended? Please add some more specifics to the commit text so
> we know exactly where it's happening. Also add a comment above
> the if statement describing why we're checking the variable so it
> isn't buried in commit text somewhere and Cc timekeeping
> maintainers on the patch please.

Ok, I'll comment this in the code and repost.

-Tero


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 284ba449..91ddc92 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -21,6 +21,7 @@ 
 #include <linux/of_address.h>
 #include <linux/clk/ti.h>
 #include <linux/delay.h>
+#include <linux/timekeeping.h>
 #include "clock.h"
 
 #define NO_IDLEST			0x1
@@ -90,7 +91,7 @@  static bool _omap4_is_ready(u32 val)
 
 static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout)
 {
-	if (unlikely(_early_timeout)) {
+	if (unlikely(_early_timeout || timekeeping_suspended)) {
 		if (time->cycles++ < timeout) {
 			udelay(1);
 			return false;