| Message ID | 20171108080250.5662-4-houtao1@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 08, 2017 at 04:02:49PM +0800, Hou Tao wrote: > When the first writeback and the retried writeback of dquota buffer get > the same IO error, XFS will let xfsaild to restart the writeback and > xfs_qm_dqflush_done() will not be invoked. xfsaild will try to re-push > the quota log item in AIL, the push will return early everytime after > checking xfs_dqflock_nowait(), and xfsaild will try to push it again. > > IOWs, AIL will never be empty, and the umount process will wait for the > drain of AIL, so the umount process hangs. > > Signed-off-by: Hou Tao <houtao1@huawei.com> I still couldn't reproduce the hang either on my test vms nor a real hardware. I've confirmed /sys/fs/xfs/<dev>/error/fail_at_unmount is the default value (1), and all max_retries and retry_timeout_seconds are -1 in /sys/fs/xfs/<dev>/error/metadata/* 999.full meta-data=/dev/sda6 isize=512 agcount=4, agsize=983040 blks = sectsz=512 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=0, rmapbt=0, reflink=0 data = bsize=4096 blocks=3932160, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=1 log =internal log bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Name: flakey-test State: ACTIVE Read Ahead: 256 Tables present: LIVE Open count: 0 Event number: 0 Major, minor: 253, 0 Number of targets: 1 flakey-test: 0 31457280 flakey 8:6 0 180 0 0 fs.xfs.xfssyncd_centisecs = 100 MOUNT_OPTIONS = -o usrquota User quota on /mnt/testarea/scratch (/dev/mapper/flakey-test) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 3 0 0 00 [------] fsgqa 0 500 0 00 [------] Name: flakey-test State: ACTIVE Read Ahead: 256 Tables present: LIVE Open count: 1 Event number: 0 Major, minor: 253, 0 Number of targets: 3 flakey-test: 0 16777256 flakey 8:6 0 0 1 1 error_writes flakey-test: 16777256 20480 linear 8:6 16777256 flakey-test: 16797736 14659544 flakey 8:6 16797736 0 1 1 error_writes User quota on /mnt/testarea/scratch (/dev/mapper/flakey-test) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 3 0 0 00 [------] fsgqa 0 400 0 00 [------] dmesg log [696341.359293] run fstests xfs/999 at 2017-11-08 17:50:12 [696341.670317] XFS (sda6): Unmounting Filesystem [696341.950979] XFS (dm-0): Mounting V5 Filesystem [696341.968803] XFS (dm-0): Ending clean mount [696341.971460] XFS (dm-0): Quotacheck needed: Please wait. [696341.981099] XFS (dm-0): Quotacheck: Done. [696342.201576] XFS (dm-0): metadata I/O error: block 0xf00049 ("xlog_iodone") error 5 numblks 64 [696342.203589] XFS (dm-0): xfs_do_force_shutdown(0x2) called from line 1260 of file fs/xfs/xfs_log.c. Return address = 0xffffffffa0158ee6 [696342.206708] XFS (dm-0): Log I/O Error Detected. Shutting down filesystem [696342.208160] XFS (dm-0): Please umount the filesystem and rectify the problem(s) [696344.222212] XFS (dm-0): Unmounting Filesystem [696344.223587] XFS (dm-0): xfs_qm_dqpurge: dquot ffff8801b75270e0 flush failed [696344.413415] XFS (sda5): Unmounting Filesystem > --- > tests/xfs/999 | 171 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/999.out | 2 + > tests/xfs/group | 1 + > 3 files changed, 174 insertions(+) > create mode 100755 tests/xfs/999 > create mode 100644 tests/xfs/999.out > > diff --git a/tests/xfs/999 b/tests/xfs/999 > new file mode 100755 > index 0000000..cea2f85 > --- /dev/null > +++ b/tests/xfs/999 > @@ -0,0 +1,171 @@ > +#! /bin/bash > +# FS QA Test No. 999 > +# > +# Test for XFS umount hang problem caused by the unceasing push > +# of dquot log item in AIL. Because xfs_qm_dqflush_done() will > +# not be invoked, so each time xfsaild initiates the push, > +# the push will return early after checking xfs_dqflock_nowait(). > +# > +# xfs_qm_dqflush_done() should be invoked by xfs_buf_do_callbacks(). > +# However after the first write and the retried write of dquota buffer > +# get the same IO error, XFS will let xfsaild to restart the write and > +# xfs_buf_do_callbacks() will not be inovked. > +# > +# This test emulates the write error by using dm-flakey. The log > +# area of the XFS filesystem is excluded from the range covered by > +# dm-flakey, so the XFS will not be shutdown prematurely. > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2017 Huawei Technologies Co., Ltd. All Rights Reserved. > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + [ -z "${interval}" ] || \ > + sysctl -w fs.xfs.xfssyncd_centisecs=${interval} >/dev/null 2>&1 > + cd / > + rm -f $tmp.* > + _unmount_flakey >/dev/null 2>&1 > + _cleanup_flakey > /dev/null 2>&1 > +} > + > +_get_xfs_scratch_sb_field() > +{ > + local field=$1 > + > + _scratch_xfs_db -r -c "sb 0" -c "print $field" | \ > + awk -v field=$field '$0 ~ field {print $3}' ^^^ $AWK_PROG > +} Put this function in common/xfs in the first place, no need to move it there in patch 4. > + > +# inject IO write error for the XFS filesystem except its log section > +make_xfs_scratch_flakey_table() > +{ > + local tgt=flakey > + local opt="0 1 1 error_writes" > + local dev=${SCRATCH_DEV} > + local dev_sz=$(blockdev --getsz $dev) > + > + if [ "${USE_EXTERNAL}" = "yes" -a ! -z "$SCRATCH_LOGDEV" ]; then > + echo "0 ${dev_sz} $tgt $dev 0 $opt" > + return > + fi > + > + local blk_sz=$(_get_xfs_scratch_sb_field blocksize) > + local log_ofs=$(_get_xfs_scratch_sb_field logstart) > + local log_sz=$(_get_xfs_scratch_sb_field logblocks) > + local table="" > + local ofs=0 > + local sz > + > + let "log_ofs *= blk_sz / 512" > + let "log_sz *= blk_sz / 512" > + > + if [ "$ofs" -lt "${log_ofs}" ]; then > + let "sz = log_ofs - ofs" > + table="$ofs $sz $tgt $dev $ofs $opt" > + fi > + > + table="$table\n${log_ofs} ${log_sz} linear $dev ${log_ofs}" > + > + let "ofs = log_ofs + log_sz" > + if [ "$ofs" -lt "${dev_sz}" ]; then > + let "sz = dev_sz - ofs" > + table="$table\n$ofs $sz $tgt $dev $ofs $opt" > + fi > + > + echo -e $table > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/dmflakey > +. ./common/quota > + > +_supported_fs xfs > +_supported_os Linux > + > +# due to the injection of write IO error, the fs will be inconsistent > +_require_scratch_nocheck > +# error_writes feature is introduced in dm-flakey v1.4.0, so check for that > +_require_dm_target flakey "1.4.0" > +_require_user > +_require_xfs_quota > +_require_freeze > + > +rm -f $seqres.full > + > +echo "Silence is golden" > + > +_scratch_mkfs_xfs > $seqres.full 2>&1 > + > +# no error will be injected > +_init_flakey > +$DMSETUP_PROG info >> $seqres.full > +$DMSETUP_PROG table >> $seqres.full > + > +# save the old value for _cleanup() > +interval=$(sysctl -n fs.xfs.xfssyncd_centisecs 2>/dev/null) > +# shorten the time waiting for the push of ail items > +sysctl -w fs.xfs.xfssyncd_centisecs=100 >> $seqres.full 2>&1 > + > +_qmount_option "usrquota" > +_mount_flakey > + > +# We need to set the quota limitation twice, and inject the write error > +# after the second setting. If we try to inject the write error after > +# the first setting, the initialization of the dquota buffer will get > +# IO error and also be retried, and during the umount process the > +# write will be ended, and xfs_qm_dqflush_done() will be inovked, and > +# the umount will exit normally. > +$XFS_QUOTA_PROG -x -c "limit -u isoft=500 fsgqa" $SCRATCH_MNT Use $qa_user instead of the hardcoded "fsgqa". Thanks, Eryu > +$XFS_QUOTA_PROG -x -c "report -ih" $SCRATCH_MNT >> $seqres.full > + > +# ensure the initialization of the dquota buffer is done > +xfs_freeze -f $SCRATCH_MNT > +xfs_freeze -u $SCRATCH_MNT > + > +# inject write IO error > +FLAKEY_TABLE_DROP=$(make_xfs_scratch_flakey_table) > +_load_flakey_table ${FLAKEY_DROP_WRITES} > +$DMSETUP_PROG info >> $seqres.full > +$DMSETUP_PROG table >> $seqres.full > + > +# update the dquota buffer > +$XFS_QUOTA_PROG -x -c "limit -u isoft=400 fsgqa" $SCRATCH_MNT > +$XFS_QUOTA_PROG -x -c "report -ih" $SCRATCH_MNT >> $seqres.full > + > +sync > + > +# wait for the push of the dquota log item in AIL and > +# the completion of the retried write of dquota buffer > +sleep 2 > + > +_unmount_flakey > + > +_cleanup_flakey > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/999.out b/tests/xfs/999.out > new file mode 100644 > index 0000000..3b276ca > --- /dev/null > +++ b/tests/xfs/999.out > @@ -0,0 +1,2 @@ > +QA output created by 999 > +Silence is golden > diff --git a/tests/xfs/group b/tests/xfs/group > index b439842..127019a 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -431,3 +431,4 @@ > 431 auto quick dangerous > 432 auto quick dir metadata > 433 auto quick attr > +999 auto quick quota dangerous > -- > 2.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 2017/11/8 17:56, Eryu Guan wrote: > On Wed, Nov 08, 2017 at 04:02:49PM +0800, Hou Tao wrote: >> When the first writeback and the retried writeback of dquota buffer get >> the same IO error, XFS will let xfsaild to restart the writeback and >> xfs_qm_dqflush_done() will not be invoked. xfsaild will try to re-push >> the quota log item in AIL, the push will return early everytime after >> checking xfs_dqflock_nowait(), and xfsaild will try to push it again. >> >> IOWs, AIL will never be empty, and the umount process will wait for the >> drain of AIL, so the umount process hangs. >> >> Signed-off-by: Hou Tao <houtao1@huawei.com> > > I still couldn't reproduce the hang either on my test vms nor a real > hardware. I've confirmed /sys/fs/xfs/<dev>/error/fail_at_unmount is the > default value (1), and all max_retries and retry_timeout_seconds are -1 > in /sys/fs/xfs/<dev>/error/metadata/* > > 999.full > meta-data=/dev/sda6 isize=512 agcount=4, agsize=983040 blks > = sectsz=512 attr=2, projid32bit=1 > = crc=1 finobt=1, sparse=0, rmapbt=0, reflink=0 > data = bsize=4096 blocks=3932160, imaxpct=25 > = sunit=0 swidth=0 blks > naming =version 2 bsize=4096 ascii-ci=0 ftype=1 > log =internal log bsize=4096 blocks=2560, version=2 > = sectsz=512 sunit=0 blks, lazy-count=1 > realtime =none extsz=4096 blocks=0, rtextents=0 > Name: flakey-test > State: ACTIVE > Read Ahead: 256 > Tables present: LIVE > Open count: 0 > Event number: 0 > Major, minor: 253, 0 > Number of targets: 1 > > flakey-test: 0 31457280 flakey 8:6 0 180 0 0 > fs.xfs.xfssyncd_centisecs = 100 > MOUNT_OPTIONS = -o usrquota > User quota on /mnt/testarea/scratch (/dev/mapper/flakey-test) > Inodes > User ID Used Soft Hard Warn/Grace > ---------- --------------------------------- > root 3 0 0 00 [------] > fsgqa 0 500 0 00 [------] > > Name: flakey-test > State: ACTIVE > Read Ahead: 256 > Tables present: LIVE > Open count: 1 > Event number: 0 > Major, minor: 253, 0 > Number of targets: 3 > > flakey-test: 0 16777256 flakey 8:6 0 0 1 1 error_writes > flakey-test: 16777256 20480 linear 8:6 16777256 > flakey-test: 16797736 14659544 flakey 8:6 16797736 0 1 1 error_writes > User quota on /mnt/testarea/scratch (/dev/mapper/flakey-test) > Inodes > User ID Used Soft Hard Warn/Grace > ---------- --------------------------------- > root 3 0 0 00 [------] > fsgqa 0 400 0 00 [------] > > dmesg log > [696341.359293] run fstests xfs/999 at 2017-11-08 17:50:12 > [696341.670317] XFS (sda6): Unmounting Filesystem > [696341.950979] XFS (dm-0): Mounting V5 Filesystem > [696341.968803] XFS (dm-0): Ending clean mount > [696341.971460] XFS (dm-0): Quotacheck needed: Please wait. > [696341.981099] XFS (dm-0): Quotacheck: Done. > [696342.201576] XFS (dm-0): metadata I/O error: block 0xf00049 ("xlog_iodone") error 5 numblks 64 > [696342.203589] XFS (dm-0): xfs_do_force_shutdown(0x2) called from line 1260 of file fs/xfs/xfs_log.c. Return address = 0xffffffffa0158ee6 > [696342.206708] XFS (dm-0): Log I/O Error Detected. Shutting down filesystem > [696342.208160] XFS (dm-0): Please umount the filesystem and rectify the problem(s) Oops, the calculation of log_ofs in make_xfs_scratch_flakey_table() is incorrect, so the block 15728713 (0xf00049) is included in the first target of flakey-test, but it should locate in the second target of flakey-test. The first target is flakey target instead of linear target, so the write of the log block got IO errors, and XFS was shutdown prematurely, and the write of dquota buffer was aborted instead of retried, so no hang. In make_xfs_scratch_flakey_table(), i calculate log_ofs by using the following commands: let "log_ofs *= blk_sz / 512", I should use convert cmd in xfs_db instead, and i will fix it in v3: log_ofs=$(_scratch_xfs_db -r -c "convert fsb ${log_ofs} bb" | \ awk '{gsub("[()]", "", $2); print $2}') Thanks, Tao > [696344.222212] XFS (dm-0): Unmounting Filesystem > [696344.223587] XFS (dm-0): xfs_qm_dqpurge: dquot ffff8801b75270e0 flush failed > [696344.413415] XFS (sda5): Unmounting Filesystem > >> --- >> tests/xfs/999 | 171 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> tests/xfs/999.out | 2 + >> tests/xfs/group | 1 + >> 3 files changed, 174 insertions(+) >> create mode 100755 tests/xfs/999 >> create mode 100644 tests/xfs/999.out >> >> diff --git a/tests/xfs/999 b/tests/xfs/999 >> new file mode 100755 >> index 0000000..cea2f85 >> --- /dev/null >> +++ b/tests/xfs/999 >> @@ -0,0 +1,171 @@ >> +#! /bin/bash >> +# FS QA Test No. 999 >> +# >> +# Test for XFS umount hang problem caused by the unceasing push >> +# of dquot log item in AIL. Because xfs_qm_dqflush_done() will >> +# not be invoked, so each time xfsaild initiates the push, >> +# the push will return early after checking xfs_dqflock_nowait(). >> +# >> +# xfs_qm_dqflush_done() should be invoked by xfs_buf_do_callbacks(). >> +# However after the first write and the retried write of dquota buffer >> +# get the same IO error, XFS will let xfsaild to restart the write and >> +# xfs_buf_do_callbacks() will not be inovked. >> +# >> +# This test emulates the write error by using dm-flakey. The log >> +# area of the XFS filesystem is excluded from the range covered by >> +# dm-flakey, so the XFS will not be shutdown prematurely. >> +# >> +#----------------------------------------------------------------------- >> +# Copyright (c) 2017 Huawei Technologies Co., Ltd. All Rights Reserved. >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation. >> +# >> +# This program is distributed in the hope that it would be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write the Free Software Foundation, >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >> +#----------------------------------------------------------------------- >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +here=`pwd` >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + [ -z "${interval}" ] || \ >> + sysctl -w fs.xfs.xfssyncd_centisecs=${interval} >/dev/null 2>&1 >> + cd / >> + rm -f $tmp.* >> + _unmount_flakey >/dev/null 2>&1 >> + _cleanup_flakey > /dev/null 2>&1 >> +} >> + >> +_get_xfs_scratch_sb_field() >> +{ >> + local field=$1 >> + >> + _scratch_xfs_db -r -c "sb 0" -c "print $field" | \ >> + awk -v field=$field '$0 ~ field {print $3}' > ^^^ $AWK_PROG >> +} > > Put this function in common/xfs in the first place, no need to move it > there in patch 4. > >> + >> +# inject IO write error for the XFS filesystem except its log section >> +make_xfs_scratch_flakey_table() >> +{ >> + local tgt=flakey >> + local opt="0 1 1 error_writes" >> + local dev=${SCRATCH_DEV} >> + local dev_sz=$(blockdev --getsz $dev) >> + >> + if [ "${USE_EXTERNAL}" = "yes" -a ! -z "$SCRATCH_LOGDEV" ]; then >> + echo "0 ${dev_sz} $tgt $dev 0 $opt" >> + return >> + fi >> + >> + local blk_sz=$(_get_xfs_scratch_sb_field blocksize) >> + local log_ofs=$(_get_xfs_scratch_sb_field logstart) >> + local log_sz=$(_get_xfs_scratch_sb_field logblocks) >> + local table="" >> + local ofs=0 >> + local sz >> + >> + let "log_ofs *= blk_sz / 512" >> + let "log_sz *= blk_sz / 512" >> + >> + if [ "$ofs" -lt "${log_ofs}" ]; then >> + let "sz = log_ofs - ofs" >> + table="$ofs $sz $tgt $dev $ofs $opt" >> + fi >> + >> + table="$table\n${log_ofs} ${log_sz} linear $dev ${log_ofs}" >> + >> + let "ofs = log_ofs + log_sz" >> + if [ "$ofs" -lt "${dev_sz}" ]; then >> + let "sz = dev_sz - ofs" >> + table="$table\n$ofs $sz $tgt $dev $ofs $opt" >> + fi >> + >> + echo -e $table >> +} >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/dmflakey >> +. ./common/quota >> + >> +_supported_fs xfs >> +_supported_os Linux >> + >> +# due to the injection of write IO error, the fs will be inconsistent >> +_require_scratch_nocheck >> +# error_writes feature is introduced in dm-flakey v1.4.0, so check for that >> +_require_dm_target flakey "1.4.0" >> +_require_user >> +_require_xfs_quota >> +_require_freeze >> + >> +rm -f $seqres.full >> + >> +echo "Silence is golden" >> + >> +_scratch_mkfs_xfs > $seqres.full 2>&1 >> + >> +# no error will be injected >> +_init_flakey >> +$DMSETUP_PROG info >> $seqres.full >> +$DMSETUP_PROG table >> $seqres.full >> + >> +# save the old value for _cleanup() >> +interval=$(sysctl -n fs.xfs.xfssyncd_centisecs 2>/dev/null) >> +# shorten the time waiting for the push of ail items >> +sysctl -w fs.xfs.xfssyncd_centisecs=100 >> $seqres.full 2>&1 >> + >> +_qmount_option "usrquota" >> +_mount_flakey >> + >> +# We need to set the quota limitation twice, and inject the write error >> +# after the second setting. If we try to inject the write error after >> +# the first setting, the initialization of the dquota buffer will get >> +# IO error and also be retried, and during the umount process the >> +# write will be ended, and xfs_qm_dqflush_done() will be inovked, and >> +# the umount will exit normally. >> +$XFS_QUOTA_PROG -x -c "limit -u isoft=500 fsgqa" $SCRATCH_MNT > > Use $qa_user instead of the hardcoded "fsgqa". > > Thanks, > Eryu > >> +$XFS_QUOTA_PROG -x -c "report -ih" $SCRATCH_MNT >> $seqres.full >> + >> +# ensure the initialization of the dquota buffer is done >> +xfs_freeze -f $SCRATCH_MNT >> +xfs_freeze -u $SCRATCH_MNT >> + >> +# inject write IO error >> +FLAKEY_TABLE_DROP=$(make_xfs_scratch_flakey_table) >> +_load_flakey_table ${FLAKEY_DROP_WRITES} >> +$DMSETUP_PROG info >> $seqres.full >> +$DMSETUP_PROG table >> $seqres.full >> + >> +# update the dquota buffer >> +$XFS_QUOTA_PROG -x -c "limit -u isoft=400 fsgqa" $SCRATCH_MNT >> +$XFS_QUOTA_PROG -x -c "report -ih" $SCRATCH_MNT >> $seqres.full >> + >> +sync >> + >> +# wait for the push of the dquota log item in AIL and >> +# the completion of the retried write of dquota buffer >> +sleep 2 >> + >> +_unmount_flakey >> + >> +_cleanup_flakey >> + >> +# success, all done >> +status=0 >> +exit >> diff --git a/tests/xfs/999.out b/tests/xfs/999.out >> new file mode 100644 >> index 0000000..3b276ca >> --- /dev/null >> +++ b/tests/xfs/999.out >> @@ -0,0 +1,2 @@ >> +QA output created by 999 >> +Silence is golden >> diff --git a/tests/xfs/group b/tests/xfs/group >> index b439842..127019a 100644 >> --- a/tests/xfs/group >> +++ b/tests/xfs/group >> @@ -431,3 +431,4 @@ >> 431 auto quick dangerous >> 432 auto quick dir metadata >> 433 auto quick attr >> +999 auto quick quota dangerous >> -- >> 2.9.5 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe fstests" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > . > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/xfs/999 b/tests/xfs/999 new file mode 100755 index 0000000..cea2f85 --- /dev/null +++ b/tests/xfs/999 @@ -0,0 +1,171 @@ +#! /bin/bash +# FS QA Test No. 999 +# +# Test for XFS umount hang problem caused by the unceasing push +# of dquot log item in AIL. Because xfs_qm_dqflush_done() will +# not be invoked, so each time xfsaild initiates the push, +# the push will return early after checking xfs_dqflock_nowait(). +# +# xfs_qm_dqflush_done() should be invoked by xfs_buf_do_callbacks(). +# However after the first write and the retried write of dquota buffer +# get the same IO error, XFS will let xfsaild to restart the write and +# xfs_buf_do_callbacks() will not be inovked. +# +# This test emulates the write error by using dm-flakey. The log +# area of the XFS filesystem is excluded from the range covered by +# dm-flakey, so the XFS will not be shutdown prematurely. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Huawei Technologies Co., Ltd. All Rights Reserved. +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + [ -z "${interval}" ] || \ + sysctl -w fs.xfs.xfssyncd_centisecs=${interval} >/dev/null 2>&1 + cd / + rm -f $tmp.* + _unmount_flakey >/dev/null 2>&1 + _cleanup_flakey > /dev/null 2>&1 +} + +_get_xfs_scratch_sb_field() +{ + local field=$1 + + _scratch_xfs_db -r -c "sb 0" -c "print $field" | \ + awk -v field=$field '$0 ~ field {print $3}' +} + +# inject IO write error for the XFS filesystem except its log section +make_xfs_scratch_flakey_table() +{ + local tgt=flakey + local opt="0 1 1 error_writes" + local dev=${SCRATCH_DEV} + local dev_sz=$(blockdev --getsz $dev) + + if [ "${USE_EXTERNAL}" = "yes" -a ! -z "$SCRATCH_LOGDEV" ]; then + echo "0 ${dev_sz} $tgt $dev 0 $opt" + return + fi + + local blk_sz=$(_get_xfs_scratch_sb_field blocksize) + local log_ofs=$(_get_xfs_scratch_sb_field logstart) + local log_sz=$(_get_xfs_scratch_sb_field logblocks) + local table="" + local ofs=0 + local sz + + let "log_ofs *= blk_sz / 512" + let "log_sz *= blk_sz / 512" + + if [ "$ofs" -lt "${log_ofs}" ]; then + let "sz = log_ofs - ofs" + table="$ofs $sz $tgt $dev $ofs $opt" + fi + + table="$table\n${log_ofs} ${log_sz} linear $dev ${log_ofs}" + + let "ofs = log_ofs + log_sz" + if [ "$ofs" -lt "${dev_sz}" ]; then + let "sz = dev_sz - ofs" + table="$table\n$ofs $sz $tgt $dev $ofs $opt" + fi + + echo -e $table +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/dmflakey +. ./common/quota + +_supported_fs xfs +_supported_os Linux + +# due to the injection of write IO error, the fs will be inconsistent +_require_scratch_nocheck +# error_writes feature is introduced in dm-flakey v1.4.0, so check for that +_require_dm_target flakey "1.4.0" +_require_user +_require_xfs_quota +_require_freeze + +rm -f $seqres.full + +echo "Silence is golden" + +_scratch_mkfs_xfs > $seqres.full 2>&1 + +# no error will be injected +_init_flakey +$DMSETUP_PROG info >> $seqres.full +$DMSETUP_PROG table >> $seqres.full + +# save the old value for _cleanup() +interval=$(sysctl -n fs.xfs.xfssyncd_centisecs 2>/dev/null) +# shorten the time waiting for the push of ail items +sysctl -w fs.xfs.xfssyncd_centisecs=100 >> $seqres.full 2>&1 + +_qmount_option "usrquota" +_mount_flakey + +# We need to set the quota limitation twice, and inject the write error +# after the second setting. If we try to inject the write error after +# the first setting, the initialization of the dquota buffer will get +# IO error and also be retried, and during the umount process the +# write will be ended, and xfs_qm_dqflush_done() will be inovked, and +# the umount will exit normally. +$XFS_QUOTA_PROG -x -c "limit -u isoft=500 fsgqa" $SCRATCH_MNT +$XFS_QUOTA_PROG -x -c "report -ih" $SCRATCH_MNT >> $seqres.full + +# ensure the initialization of the dquota buffer is done +xfs_freeze -f $SCRATCH_MNT +xfs_freeze -u $SCRATCH_MNT + +# inject write IO error +FLAKEY_TABLE_DROP=$(make_xfs_scratch_flakey_table) +_load_flakey_table ${FLAKEY_DROP_WRITES} +$DMSETUP_PROG info >> $seqres.full +$DMSETUP_PROG table >> $seqres.full + +# update the dquota buffer +$XFS_QUOTA_PROG -x -c "limit -u isoft=400 fsgqa" $SCRATCH_MNT +$XFS_QUOTA_PROG -x -c "report -ih" $SCRATCH_MNT >> $seqres.full + +sync + +# wait for the push of the dquota log item in AIL and +# the completion of the retried write of dquota buffer +sleep 2 + +_unmount_flakey + +_cleanup_flakey + +# success, all done +status=0 +exit diff --git a/tests/xfs/999.out b/tests/xfs/999.out new file mode 100644 index 0000000..3b276ca --- /dev/null +++ b/tests/xfs/999.out @@ -0,0 +1,2 @@ +QA output created by 999 +Silence is golden diff --git a/tests/xfs/group b/tests/xfs/group index b439842..127019a 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -431,3 +431,4 @@ 431 auto quick dangerous 432 auto quick dir metadata 433 auto quick attr +999 auto quick quota dangerous
When the first writeback and the retried writeback of dquota buffer get the same IO error, XFS will let xfsaild to restart the writeback and xfs_qm_dqflush_done() will not be invoked. xfsaild will try to re-push the quota log item in AIL, the push will return early everytime after checking xfs_dqflock_nowait(), and xfsaild will try to push it again. IOWs, AIL will never be empty, and the umount process will wait for the drain of AIL, so the umount process hangs. Signed-off-by: Hou Tao <houtao1@huawei.com> --- tests/xfs/999 | 171 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/999.out | 2 + tests/xfs/group | 1 + 3 files changed, 174 insertions(+) create mode 100755 tests/xfs/999 create mode 100644 tests/xfs/999.out