Patchwork [v4,2/2] ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC

login
register
mail settings
Submitter Yixun Lan
Date Dec. 8, 2017, 1:54 a.m.
Message ID <20171208015418.9632-3-yixun.lan@amlogic.com>
Download mbox | patch
Permalink /patch/10101473/
State New
Headers show

Comments

Yixun Lan - Dec. 8, 2017, 1:54 a.m.
From: Xingyu Chen <xingyu.chen@amlogic.com>

Add new pinctrl DT info for the Amlogic's Meson-AXG SoC.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
Kevin Hilman - Dec. 15, 2017, 8:20 p.m.
Yixun Lan <yixun.lan@amlogic.com> writes:

> From: Xingyu Chen <xingyu.chen@amlogic.com>
>
> Add new pinctrl DT info for the Amlogic's Meson-AXG SoC.
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index e7213eb53958..7b24f83ab4bf 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/meson-axg-gpio.h>

FYI: I dropped this line, since it's not used (yet) and it causes an
unncessary dependency on an external tree.  It can be added back as soon
as there are users.

Kevin

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index e7213eb53958..7b24f83ab4bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-axg-gpio.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -157,6 +158,32 @@ 
 			#mbox-cells = <1>;
 		};
 
+		periphs: periphs@ff634000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff634000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+			pinctrl_periphs: pinctrl@480 {
+				compatible = "amlogic,meson-axg-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@480 {
+					reg = <0x0 0x00480 0x0 0x40>,
+						<0x0 0x004e8 0x0 0x14>,
+						<0x0 0x00520 0x0 0x14>,
+						<0x0 0x00430 0x0 0x3c>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_periphs 0 0 86>;
+				};
+			};
+		};
+
 		sram: sram@fffc0000 {
 			compatible = "amlogic,meson-axg-sram", "mmio-sram";
 			reg = <0x0 0xfffc0000 0x0 0x20000>;
@@ -182,6 +209,23 @@ 
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-axg-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+						<0x0 0x0002c 0x0 0x4>,
+						<0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_aobus 0 0 15>;
+				};
+			};
+
 			uart_AO: serial@3000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;