diff mbox

[5/5] arm: dts: sun8i: a83t: a711: Add touchscreen node

Message ID 20171208215419.30396-6-mylene.josserand@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mylene JOSSERAND Dec. 8, 2017, 9:54 p.m. UTC
Tha A711 tablet has a FocalTech EDT-FT5x06 Polytouch touchscreen.
It is connected via I2C0 so add his node in i2c0's node.

The reset line is PD5, the interrupt line is PL7 and the power
supply is the ldo_io0 regulator.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Maxime Ripard Dec. 11, 2017, 7:16 a.m. UTC | #1
Hi,

On Fri, Dec 08, 2017 at 10:54:19PM +0100, Mylène Josserand wrote:
> Tha A711 tablet has a FocalTech EDT-FT5x06 Polytouch touchscreen.
> It is connected via I2C0 so add his node in i2c0's node.
> 
> The reset line is PD5, the interrupt line is PL7 and the power
> supply is the ldo_io0 regulator.
> 
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index 84cca1a48cea..738359917a34 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -110,6 +110,17 @@
>  	pinctrl-0 = <&i2c0_pins>;
>  	clock-frequency = <400000>;
>  	status = "okay";
> +
> +	polytouch: edt-ft5x06@38 {

You're not using that label anywhere, so you can drop it, and the node
name must be the class of the device.

Thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 84cca1a48cea..738359917a34 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -110,6 +110,17 @@ 
 	pinctrl-0 = <&i2c0_pins>;
 	clock-frequency = <400000>;
 	status = "okay";
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
 };
 
 &mmc0 {