| Message ID | 20171215124638.30233-1-malat@debian.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/15/2017 06:46 AM, Mathieu Malaterre wrote: > Improve the DTS files by removing all the leading "0x" and zeros to fix the > following dtc warnings: > > Warning (unit_address_format): Node /XXX unit name should not have leading "0x" > > and > > Warning (unit_address_format): Node /XXX unit name should not have leading 0s > > Converted using the following command: > > find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C > > For simplicity, two sed expressions were used to solve each warnings separately. > > To make the regex expression more robust a few other issues were resolved, > namely setting unit-address to lower case, and adding a whitespace before the > the opening curly brace: > > https://elinux.org/Device_Tree_Linux#Linux_conventions > > This will solve as a side effect warning: > > Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" > > This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") > > Reported-by: David Daney <ddaney@caviumnetworks.com> > Suggested-by: Rob Herring <robh@kernel.org> > Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Nishanth Menon <nm@ti.com>
On 12/15/17 4:46 AM, Mathieu Malaterre wrote: > Improve the DTS files by removing all the leading "0x" and zeros to fix the > following dtc warnings: > > Warning (unit_address_format): Node /XXX unit name should not have leading "0x" > > and > > Warning (unit_address_format): Node /XXX unit name should not have leading 0s > > Converted using the following command: > > find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C > > For simplicity, two sed expressions were used to solve each warnings separately. > > To make the regex expression more robust a few other issues were resolved, > namely setting unit-address to lower case, and adding a whitespace before the > the opening curly brace: > > https://urldefense.proofpoint.com/v2/url?u=https-3A__elinux.org_Device-5FTree-5FLinux-23Linux-5Fconventions&d=DwIBAg&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=hWpFvp_cTkkwMMULcvbV65orOO9Gv3OUaY0ATWhQwak&m=4zPLm6aGenI9keAZLborgvk3tLzaGsH_T4xXnh1mN3c&s=nCTYz6lbODdmoNqNYOTb6wm8nNYWW-AZlwiaUp7gpmM&e= > > This will solve as a side effect warning: > > Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" > > This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") > > Reported-by: David Daney <ddaney@caviumnetworks.com> > Suggested-by: Rob Herring <robh@kernel.org> > Signed-off-by: Mathieu Malaterre <malat@debian.org> > --- Looks good. Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index ba828cb59587..940b64935bde 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -98,7 +98,7 @@ qmss: qmss@2a40000 { #address-cells = <1>; #size-cells = <1>; ranges; - pdsp0@0x2a10000 { + pdsp0@2a10000 { reg = <0x2a10000 0x1000 /*iram */ 0x2a0f000 0x100 /*reg*/ 0x2a0c000 0x3c8 /*intd */ diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index a5ac845464bf..ed7287a274a0 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -115,7 +115,7 @@ qmss: qmss@2a40000 { #address-cells = <1>; #size-cells = <1>; ranges; - pdsp0@0x2a10000 { + pdsp0@2a10000 { reg = <0x2a10000 0x1000 /*iram */ 0x2a0f000 0x100 /*reg*/ 0x2a0c000 0x3c8 /*intd */ diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 66f615a74118..b6af5f78e498 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -97,7 +97,7 @@ qmss: qmss@2a40000 { #address-cells = <1>; #size-cells = <1>; ranges; - pdsp0@0x2a10000 { + pdsp0@2a10000 { reg = <0x2a10000 0x1000 /*iram */ 0x2a0f000 0x100 /*reg*/ 0x2a0c000 0x3c8 /*intd */ diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 06e10544f9b1..f8ecbe504182 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -271,7 +271,7 @@ ti,davinci-gpio-unbanked = <32>; }; - aemif: aemif@21000A00 { + aemif: aemif@21000a00 { compatible = "ti,keystone-aemif", "ti,davinci-aemif"; #address-cells = <2>; #size-cells = <1>;
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> --- arch/arm/boot/dts/keystone-k2e-netcp.dtsi | 2 +- arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 2 +- arch/arm/boot/dts/keystone-k2l-netcp.dtsi | 2 +- arch/arm/boot/dts/keystone.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)