@@ -24,7 +24,7 @@
reg = <0x0 0x08000000>;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -34,7 +34,7 @@
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
- led@08.0 {
+ led@8.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -42,7 +42,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -50,7 +50,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -58,35 +58,35 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
@@ -95,14 +95,14 @@
};
/* OSC1 on AB, OSC4 on PB */
- osc1: cm_aux_osc@24M {
+ osc1: cm_aux_osc@24m {
#clock-cells = <0>;
compatible = "arm,versatile-cm-auxosc";
clocks = <&xtal24mhz>;
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -110,7 +110,7 @@
clocks = <&xtal24mhz>;
};
- pclk: pclk@24M {
+ pclk: pclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> --- arch/arm/boot/dts/versatile-ab.dts | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)