diff mbox

[08/10] drm: xlnx: DRM KMS driver for Xilinx ZynqMP DisplayPort

Message ID 1515117959-18068-9-git-send-email-hyun.kwon@xilinx.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hyun Kwon Jan. 5, 2018, 2:05 a.m. UTC
This driver creates DRM encoder and connector for ZynqMP DisplayPort.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
---
 drivers/gpu/drm/xlnx/zynqmp_dp.c | 1864 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/xlnx/zynqmp_dp.h |   29 +
 2 files changed, 1893 insertions(+)
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.c
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.h
diff mbox

Patch

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
new file mode 100644
index 0000000..ce3c7c5
--- /dev/null
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -0,0 +1,1864 @@ 
+/*
+ * ZynqMP DisplayPort Driver
+ *
+ *  Copyright (C) 2017 - 2018 Xilinx, Inc.
+ *
+ *  Author: Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_of.h>
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/uaccess.h>
+
+#include "zynqmp_disp.h"
+#include "zynqmp_dpsub.h"
+
+static uint zynqmp_dp_aux_timeout_ms = 50;
+module_param_named(aux_timeout_ms, zynqmp_dp_aux_timeout_ms, uint, 0444);
+MODULE_PARM_DESC(aux_timeout_ms, "DP aux timeout value in msec (default: 50)");
+
+/*
+ * Some sink requires a delay after power on request
+ */
+static uint zynqmp_dp_power_on_delay_ms = 4;
+module_param_named(power_on_delay_ms, zynqmp_dp_power_on_delay_ms, uint, 0444);
+MODULE_PARM_DESC(aux_timeout_ms, "DP power on delay in msec (default: 4)");
+
+/* Link configuration registers */
+#define ZYNQMP_DP_TX_LINK_BW_SET			0x0
+#define ZYNQMP_DP_TX_LANE_CNT_SET			0x4
+#define ZYNQMP_DP_TX_ENHANCED_FRAME_EN			0x8
+#define ZYNQMP_DP_TX_TRAINING_PATTERN_SET		0xc
+#define ZYNQMP_DP_TX_SCRAMBLING_DISABLE			0x14
+#define ZYNQMP_DP_TX_DOWNSPREAD_CTL			0x18
+#define ZYNQMP_DP_TX_SW_RESET				0x1c
+#define ZYNQMP_DP_TX_SW_RESET_STREAM1			BIT(0)
+#define ZYNQMP_DP_TX_SW_RESET_STREAM2			BIT(1)
+#define ZYNQMP_DP_TX_SW_RESET_STREAM3			BIT(2)
+#define ZYNQMP_DP_TX_SW_RESET_STREAM4			BIT(3)
+#define ZYNQMP_DP_TX_SW_RESET_AUX			BIT(7)
+#define ZYNQMP_DP_TX_SW_RESET_ALL			(ZYNQMP_DP_TX_SW_RESET_STREAM1 | \
+							 ZYNQMP_DP_TX_SW_RESET_STREAM2 | \
+							 ZYNQMP_DP_TX_SW_RESET_STREAM3 | \
+							 ZYNQMP_DP_TX_SW_RESET_STREAM4 | \
+							 ZYNQMP_DP_TX_SW_RESET_AUX)
+
+/* Core enable registers */
+#define ZYNQMP_DP_TX_ENABLE				0x80
+#define ZYNQMP_DP_TX_ENABLE_MAIN_STREAM			0x84
+#define ZYNQMP_DP_TX_FORCE_SCRAMBLER_RESET		0xc0
+#define ZYNQMP_DP_TX_VERSION				0xf8
+#define ZYNQMP_DP_TX_VERSION_MAJOR_MASK			GENMASK(31, 24)
+#define ZYNQMP_DP_TX_VERSION_MAJOR_SHIFT		24
+#define ZYNQMP_DP_TX_VERSION_MINOR_MASK			GENMASK(23, 16)
+#define ZYNQMP_DP_TX_VERSION_MINOR_SHIFT		16
+#define ZYNQMP_DP_TX_VERSION_REVISION_MASK		GENMASK(15, 12)
+#define ZYNQMP_DP_TX_VERSION_REVISION_SHIFT		12
+#define ZYNQMP_DP_TX_VERSION_PATCH_MASK			GENMASK(11, 8)
+#define ZYNQMP_DP_TX_VERSION_PATCH_SHIFT		8
+#define ZYNQMP_DP_TX_VERSION_INTERNAL_MASK		GENMASK(7, 0)
+#define ZYNQMP_DP_TX_VERSION_INTERNAL_SHIFT		0
+
+/* Core ID registers */
+#define ZYNQMP_DP_TX_CORE_ID				0xfc
+#define ZYNQMP_DP_TX_CORE_ID_MAJOR_MASK			GENMASK(31, 24)
+#define ZYNQMP_DP_TX_CORE_ID_MAJOR_SHIFT		24
+#define ZYNQMP_DP_TX_CORE_ID_MINOR_MASK			GENMASK(23, 16)
+#define ZYNQMP_DP_TX_CORE_ID_MINOR_SHIFT		16
+#define ZYNQMP_DP_TX_CORE_ID_REVISION_MASK		GENMASK(15, 8)
+#define ZYNQMP_DP_TX_CORE_ID_REVISION_SHIFT		8
+#define ZYNQMP_DP_TX_CORE_ID_DIRECTION			GENMASK(1)
+
+/* AUX channel interface registers */
+#define ZYNQMP_DP_TX_AUX_COMMAND			0x100
+#define ZYNQMP_DP_TX_AUX_COMMAND_CMD_SHIFT		8
+#define ZYNQMP_DP_TX_AUX_COMMAND_ADDRESS_ONLY		BIT(12)
+#define ZYNQMP_DP_TX_AUX_COMMAND_BYTES_SHIFT		0
+#define ZYNQMP_DP_TX_AUX_WRITE_FIFO			0x104
+#define ZYNQMP_DP_TX_AUX_ADDRESS			0x108
+#define ZYNQMP_DP_TX_CLK_DIVIDER			0x10c
+#define ZYNQMP_DP_TX_CLK_DIVIDER_MHZ			1000000
+#define ZYNQMP_DP_TX_CLK_DIVIDER_AUX_FILTER_SHIFT	8
+#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE			0x130
+#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_HPD		BIT(0)
+#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REQUEST		BIT(1)
+#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY		BIT(2)
+#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY_TIMEOUT	BIT(3)
+#define ZYNQMP_DP_TX_AUX_REPLY_DATA			0x134
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE			0x138
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_ACK		(0)
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_NACK		BIT(0)
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_DEFER		BIT(1)
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_ACK		(0)
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_NACK		BIT(2)
+#define ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_DEFER		BIT(3)
+#define ZYNQMP_DP_TX_AUX_REPLY_CNT			0x13c
+#define ZYNQMP_DP_TX_AUX_REPLY_CNT_MASK			0xff
+#define ZYNQMP_DP_TX_INTR_STATUS			0x140
+#define ZYNQMP_DP_TX_INTR_MASK				0x144
+#define ZYNQMP_DP_TX_INTR_HPD_IRQ			BIT(0)
+#define ZYNQMP_DP_TX_INTR_HPD_EVENT			BIT(1)
+#define ZYNQMP_DP_TX_INTR_REPLY_RECV			BIT(2)
+#define ZYNQMP_DP_TX_INTR_REPLY_TIMEOUT			BIT(3)
+#define ZYNQMP_DP_TX_INTR_HPD_PULSE			BIT(4)
+#define ZYNQMP_DP_TX_INTR_EXT_PKT_TXD			BIT(5)
+#define ZYNQMP_DP_TX_INTR_LIV_ABUF_UNDRFLW		BIT(12)
+#define ZYNQMP_DP_TX_INTR_VBLANK_START			BIT(13)
+#define ZYNQMP_DP_TX_INTR_PIXEL0_MATCH			BIT(14)
+#define ZYNQMP_DP_TX_INTR_PIXEL1_MATCH			BIT(15)
+#define ZYNQMP_DP_TX_INTR_CHBUF_UNDERFLW_MASK		0x3f0000
+#define ZYNQMP_DP_TX_INTR_CHBUF_OVERFLW_MASK		0xfc00000
+#define ZYNQMP_DP_TX_INTR_CUST_TS_2			BIT(28)
+#define ZYNQMP_DP_TX_INTR_CUST_TS			BIT(29)
+#define ZYNQMP_DP_TX_INTR_EXT_VSYNC_TS			BIT(30)
+#define ZYNQMP_DP_TX_INTR_VSYNC_TS			BIT(31)
+#define ZYNQMP_DP_TX_INTR_ALL				(ZYNQMP_DP_TX_INTR_HPD_IRQ | \
+							 ZYNQMP_DP_TX_INTR_HPD_EVENT | \
+							 ZYNQMP_DP_TX_INTR_REPLY_RECV | \
+							 ZYNQMP_DP_TX_INTR_REPLY_TIMEOUT | \
+							 ZYNQMP_DP_TX_INTR_HPD_PULSE | \
+							 ZYNQMP_DP_TX_INTR_EXT_PKT_TXD | \
+							 ZYNQMP_DP_TX_INTR_LIV_ABUF_UNDRFLW | \
+							 ZYNQMP_DP_TX_INTR_CHBUF_UNDERFLW_MASK | \
+							 ZYNQMP_DP_TX_INTR_CHBUF_OVERFLW_MASK)
+#define ZYNQMP_DP_TX_NO_INTR_ALL			(ZYNQMP_DP_TX_INTR_PIXEL0_MATCH | \
+							 ZYNQMP_DP_TX_INTR_PIXEL1_MATCH | \
+							 ZYNQMP_DP_TX_INTR_CUST_TS_2 | \
+							 ZYNQMP_DP_TX_INTR_CUST_TS | \
+							 ZYNQMP_DP_TX_INTR_EXT_VSYNC_TS | \
+							 ZYNQMP_DP_TX_INTR_VSYNC_TS)
+#define ZYNQMP_DP_TX_REPLY_DATA_CNT			0x148
+#define ZYNQMP_DP_SUB_TX_INTR_STATUS			0x3a0
+#define ZYNQMP_DP_SUB_TX_INTR_MASK			0x3a4
+#define ZYNQMP_DP_SUB_TX_INTR_EN			0x3a8
+#define ZYNQMP_DP_SUB_TX_INTR_DS			0x3ac
+
+/* Main stream attribute registers */
+#define ZYNQMP_DP_TX_MAIN_STREAM_HTOTAL			0x180
+#define ZYNQMP_DP_TX_MAIN_STREAM_VTOTAL			0x184
+#define ZYNQMP_DP_TX_MAIN_STREAM_POLARITY		0x188
+#define ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_HSYNC_SHIFT	0
+#define ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_VSYNC_SHIFT	1
+#define ZYNQMP_DP_TX_MAIN_STREAM_HSWIDTH		0x18c
+#define ZYNQMP_DP_TX_MAIN_STREAM_VSWIDTH		0x190
+#define ZYNQMP_DP_TX_MAIN_STREAM_HRES			0x194
+#define ZYNQMP_DP_TX_MAIN_STREAM_VRES			0x198
+#define ZYNQMP_DP_TX_MAIN_STREAM_HSTART			0x19c
+#define ZYNQMP_DP_TX_MAIN_STREAM_VSTART			0x1a0
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0			0x1a4
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC		BIT(0)
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_FORMAT_SHIFT	1
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_DYNAMIC_RANGE	BIT(3)
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_YCBCR_COLRIMETRY	BIT(4)
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_BPC_SHIFT	5
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC1			0x1a8
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_INTERLACED_VERT	BIT(0)
+#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_STEREO_VID_SHIFT	1
+#define ZYNQMP_DP_TX_M_VID				0x1ac
+#define ZYNQMP_DP_TX_TRANSFER_UNIT_SIZE			0x1b0
+#define ZYNQMP_DP_TX_DEF_TRANSFER_UNIT_SIZE		64
+#define ZYNQMP_DP_TX_N_VID				0x1b4
+#define ZYNQMP_DP_TX_USER_PIXEL_WIDTH			0x1b8
+#define ZYNQMP_DP_TX_USER_DATA_CNT_PER_LANE		0x1bc
+#define ZYNQMP_DP_TX_MIN_BYTES_PER_TU			0x1c4
+#define ZYNQMP_DP_TX_FRAC_BYTES_PER_TU			0x1c8
+#define ZYNQMP_DP_TX_INIT_WAIT				0x1cc
+
+/* PHY configuration and status registers */
+#define ZYNQMP_DP_TX_PHY_CONFIG				0x200
+#define ZYNQMP_DP_TX_PHY_CONFIG_PHY_RESET		BIT(0)
+#define ZYNQMP_DP_TX_PHY_CONFIG_GTTX_RESET		BIT(1)
+#define ZYNQMP_DP_TX_PHY_CONFIG_PHY_PMA_RESET		BIT(8)
+#define ZYNQMP_DP_TX_PHY_CONFIG_PHY_PCS_RESET		BIT(9)
+#define ZYNQMP_DP_TX_PHY_CONFIG_ALL_RESET		(ZYNQMP_DP_TX_PHY_CONFIG_PHY_RESET | \
+							 ZYNQMP_DP_TX_PHY_CONFIG_GTTX_RESET | \
+							 ZYNQMP_DP_TX_PHY_CONFIG_PHY_PMA_RESET | \
+							 ZYNQMP_DP_TX_PHY_CONFIG_PHY_PCS_RESET)
+#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_0		0x210
+#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_1		0x214
+#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_2		0x218
+#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_3		0x21c
+#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_0		0x220
+#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_1		0x224
+#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_2		0x228
+#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_3		0x22c
+#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING		0x234
+#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_162	0x1
+#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_270	0x3
+#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_540	0x5
+#define ZYNQMP_DP_TX_PHY_POWER_DOWN			0x238
+#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_0		BIT(0)
+#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_1		BIT(1)
+#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_2		BIT(2)
+#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_3		BIT(3)
+#define ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL			0xf
+#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_0		0x23c
+#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_1		0x240
+#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_2		0x244
+#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_3		0x248
+#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_0		0x24c
+#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_1		0x250
+#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_2		0x254
+#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_3		0x258
+#define ZYNQMP_DP_SUB_TX_PHY_PRECURSOR_LANE_0		0x24c
+#define ZYNQMP_DP_SUB_TX_PHY_PRECURSOR_LANE_1		0x250
+#define ZYNQMP_DP_TX_PHY_STATUS				0x280
+#define ZYNQMP_DP_TX_PHY_STATUS_PLL_LOCKED_SHIFT	4
+#define ZYNQMP_DP_TX_PHY_STATUS_FPGA_PLL_LOCKED		BIT(6)
+
+/* Audio registers */
+#define ZYNQMP_DP_TX_AUDIO_CONTROL			0x300
+#define ZYNQMP_DP_TX_AUDIO_CHANNELS			0x304
+#define ZYNQMP_DP_TX_AUDIO_INFO_DATA			0x308
+#define ZYNQMP_DP_TX_AUDIO_M_AUD			0x328
+#define ZYNQMP_DP_TX_AUDIO_N_AUD			0x32c
+#define ZYNQMP_DP_TX_AUDIO_EXT_DATA			0x330
+
+#define ZYNQMP_DP_MISC0_RGB				(0)
+#define ZYNQMP_DP_MISC0_YCRCB_422			(5 << 1)
+#define ZYNQMP_DP_MISC0_YCRCB_444			(6 << 1)
+#define ZYNQMP_DP_MISC0_FORMAT_MASK			0xe
+#define ZYNQMP_DP_MISC0_BPC_6				(0 << 5)
+#define ZYNQMP_DP_MISC0_BPC_8				(1 << 5)
+#define ZYNQMP_DP_MISC0_BPC_10				(2 << 5)
+#define ZYNQMP_DP_MISC0_BPC_12				(3 << 5)
+#define ZYNQMP_DP_MISC0_BPC_16				(4 << 5)
+#define ZYNQMP_DP_MISC0_BPC_MASK			0xe0
+#define ZYNQMP_DP_MISC1_Y_ONLY				(1 << 7)
+
+#define ZYNQMP_DP_MAX_LANES				2
+#define ZYNQMP_MAX_FREQ					3000000
+
+#define DP_REDUCED_BIT_RATE				162000
+#define DP_HIGH_BIT_RATE				270000
+#define DP_HIGH_BIT_RATE2				540000
+#define DP_MAX_TRAINING_TRIES				5
+#define DP_V1_2						0x12
+
+/**
+ * struct zynqmp_dp_link_config - Common link config between source and sink
+ * @max_rate: maximum link rate
+ * @max_lanes: maximum number of lanes
+ */
+struct zynqmp_dp_link_config {
+	int max_rate;
+	u8 max_lanes;
+};
+
+/**
+ * struct zynqmp_dp_mode - Configured mode of DisplayPort
+ * @bw_code: code for bandwidth(link rate)
+ * @lane_cnt: number of lanes
+ * @pclock: pixel clock frequency of current mode
+ * @fmt: format identifier string
+ */
+struct zynqmp_dp_mode {
+	u8 bw_code;
+	u8 lane_cnt;
+	int pclock;
+	const char *fmt;
+};
+
+/**
+ * struct zynqmp_dp_config - Configuration of DisplayPort from DTS
+ * @misc0: misc0 configuration (per DP v1.2 spec)
+ * @misc1: misc1 configuration (per DP v1.2 spec)
+ * @bpp: bits per pixel
+ * @bpc: bits per component
+ * @num_colors: number of color components
+ */
+struct zynqmp_dp_config {
+	u8 misc0;
+	u8 misc1;
+	u8 bpp;
+	u8 bpc;
+	u8 num_colors;
+};
+
+/**
+ * struct zynqmp_dp - Xilinx DisplayPort core
+ * @encoder: the drm encoder structure
+ * @connector: the drm connector structure
+ * @sync_prop: synchronous mode property
+ * @bpc_prop: bpc mode property
+ * @dev: device structure
+ * @dpsub: Display subsystem
+ * @drm: DRM core
+ * @iomem: device I/O memory for register access
+ * @irq: irq
+ * @config: IP core configuration from DTS
+ * @aux: aux channel
+ * @phy: PHY handles for DP lanes
+ * @num_lanes: number of enabled phy lanes
+ * @hpd_work: hot plug detection worker
+ * @status: connection status
+ * @enabled: flag to indicate if the device is enabled
+ * @dpms: current dpms state
+ * @dpcd: DP configuration data from currently connected sink device
+ * @link_config: common link configuration between IP core and sink device
+ * @mode: current mode between IP core and sink device
+ * @train_set: set of training data
+ */
+struct zynqmp_dp {
+	struct drm_encoder encoder;
+	struct drm_connector connector;
+	struct drm_property *sync_prop;
+	struct drm_property *bpc_prop;
+	struct device *dev;
+	struct zynqmp_dpsub *dpsub;
+	struct drm_device *drm;
+	void __iomem *iomem;
+	int irq;
+
+	struct zynqmp_dp_config config;
+	struct drm_dp_aux aux;
+	struct phy *phy[ZYNQMP_DP_MAX_LANES];
+	u8 num_lanes;
+	struct delayed_work hpd_work;
+	enum drm_connector_status status;
+	bool enabled;
+
+	int dpms;
+	u8 dpcd[DP_RECEIVER_CAP_SIZE];
+	struct zynqmp_dp_link_config link_config;
+	struct zynqmp_dp_mode mode;
+	u8 train_set[ZYNQMP_DP_MAX_LANES];
+};
+
+static inline struct zynqmp_dp *encoder_to_dp(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct zynqmp_dp, encoder);
+}
+
+static inline struct zynqmp_dp *connector_to_dp(struct drm_connector *connector)
+{
+	return container_of(connector, struct zynqmp_dp, connector);
+}
+
+static void zynqmp_dp_write(void __iomem *base, int offset, u32 val)
+{
+	writel(val, base + offset);
+}
+
+static u32 zynqmp_dp_read(void __iomem *base, int offset)
+{
+	return readl(base + offset);
+}
+
+static void zynqmp_dp_clr(void __iomem *base, int offset, u32 clr)
+{
+	zynqmp_dp_write(base, offset, zynqmp_dp_read(base, offset) & ~clr);
+}
+
+static void zynqmp_dp_set(void __iomem *base, int offset, u32 set)
+{
+	zynqmp_dp_write(base, offset, zynqmp_dp_read(base, offset) | set);
+}
+
+/*
+ * Internal functions: used by zynqmp_disp.c
+ */
+
+/**
+ * zynqmp_dp_update_bpp - Update the current bpp config
+ * @dp: DisplayPort IP core structure
+ *
+ * Update the current bpp based on the color format: bpc & num_colors.
+ * Any function that changes bpc or num_colors should call this
+ * to keep the bpp value in sync.
+ */
+static void zynqmp_dp_update_bpp(struct zynqmp_dp *dp)
+{
+	struct zynqmp_dp_config *config = &dp->config;
+
+	config->bpp = dp->config.bpc * dp->config.num_colors;
+}
+
+/**
+ * zynqmp_dp_set_color - Set the color
+ * @dp: DisplayPort IP core structure
+ * @color: color string, from zynqmp_disp_color_enum
+ *
+ * Update misc register values based on @color string.
+ *
+ * Return: 0 on success, or -EINVAL.
+ */
+int zynqmp_dp_set_color(struct zynqmp_dp *dp, const char *color)
+{
+	struct zynqmp_dp_config *config = &dp->config;
+
+	config->misc0 &= ~ZYNQMP_DP_MISC0_FORMAT_MASK;
+	config->misc1 &= ~ZYNQMP_DP_MISC1_Y_ONLY;
+	if (strcmp(color, "rgb") == 0) {
+		config->misc0 |= ZYNQMP_DP_MISC0_RGB;
+		config->num_colors = 3;
+	} else if (strcmp(color, "ycrcb422") == 0) {
+		config->misc0 |= ZYNQMP_DP_MISC0_YCRCB_422;
+		config->num_colors = 2;
+	} else if (strcmp(color, "ycrcb444") == 0) {
+		config->misc0 |= ZYNQMP_DP_MISC0_YCRCB_444;
+		config->num_colors = 3;
+	} else if (strcmp(color, "yonly") == 0) {
+		config->misc1 |= ZYNQMP_DP_MISC1_Y_ONLY;
+		config->num_colors = 1;
+	} else {
+		dev_err(dp->dev, "Invalid colormetry in DT\n");
+		return -EINVAL;
+	}
+	zynqmp_dp_update_bpp(dp);
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_enable_vblank - Enable vblank
+ * @dp: DisplayPort IP core structure
+ *
+ * Enable vblank interrupt
+ */
+void zynqmp_dp_enable_vblank(struct zynqmp_dp *dp)
+{
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_EN,
+			ZYNQMP_DP_TX_INTR_VBLANK_START);
+}
+
+/**
+ * zynqmp_dp_disable_vblank - Disable vblank
+ * @dp: DisplayPort IP core structure
+ *
+ * Disable vblank interrupt
+ */
+void zynqmp_dp_disable_vblank(struct zynqmp_dp *dp)
+{
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS,
+			ZYNQMP_DP_TX_INTR_VBLANK_START);
+}
+
+/*
+ * DP PHY functions
+ */
+
+/**
+ * zynqmp_dp_init_phy - Initialize the phy
+ * @dp: DisplayPort IP core structure
+ *
+ * Initialize the phy.
+ *
+ * Return: 0 if the phy instances are initialized correctly, or the error code
+ * returned from the callee functions.
+ */
+static int zynqmp_dp_init_phy(struct zynqmp_dp *dp)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ZYNQMP_DP_MAX_LANES; i++) {
+		ret = phy_init(dp->phy[i]);
+		if (ret) {
+			dev_err(dp->dev, "failed to init phy lane %d\n", i);
+			return ret;
+		}
+	}
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS,
+			ZYNQMP_DP_TX_INTR_ALL);
+	zynqmp_dp_clr(dp->iomem, ZYNQMP_DP_TX_PHY_CONFIG,
+		      ZYNQMP_DP_TX_PHY_CONFIG_ALL_RESET);
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_exit_phy - Exit the phy
+ * @dp: DisplayPort IP core structure
+ *
+ * Exit the phy.
+ */
+static void zynqmp_dp_exit_phy(struct zynqmp_dp *dp)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ZYNQMP_DP_MAX_LANES; i++) {
+		ret = phy_exit(dp->phy[i]);
+		if (ret)
+			dev_err(dp->dev, "failed to exit phy(%d) %d\n", i, ret);
+	}
+}
+
+/**
+ * zynqmp_dp_phy_ready - Check if PHY is ready
+ * @dp: DisplayPort IP core structure
+ *
+ * Check if PHY is ready. If PHY is not ready, wait 1ms to check for 100 times.
+ * This amount of delay was suggested by IP designer.
+ *
+ * Return: 0 if PHY is ready, or -ENODEV if PHY is not ready.
+ */
+static int zynqmp_dp_phy_ready(struct zynqmp_dp *dp)
+{
+	u32 i, reg, ready;
+
+	ready = (1 << ZYNQMP_DP_MAX_LANES) - 1;
+
+	/* Wait for 100 * 1ms. This should be enough time for PHY to be ready */
+	for (i = 0; ; i++) {
+		reg = zynqmp_dp_read(dp->iomem, ZYNQMP_DP_TX_PHY_STATUS);
+		if ((reg & ready) == ready)
+			return 0;
+
+		if (i == 100) {
+			dev_err(dp->dev, "PHY isn't ready\n");
+			return -ENODEV;
+		}
+
+		usleep_range(1000, 1100);
+	}
+
+	return 0;
+}
+
+/*
+ * DP functions
+ */
+
+/**
+ * zynqmp_dp_max_rate - Calculate and return available max pixel clock
+ * @link_rate: link rate (Kilo-bytes / sec)
+ * @lane_num: number of lanes
+ * @bpp: bits per pixel
+ *
+ * Return: max pixel clock (KHz) supported by current link config.
+ */
+static inline int zynqmp_dp_max_rate(int link_rate, u8 lane_num, u8 bpp)
+{
+	return link_rate * lane_num * 8 / bpp;
+}
+
+/**
+ * zynqmp_dp_mode_configure - Configure the link values
+ * @dp: DisplayPort IP core structure
+ * @pclock: pixel clock for requested display mode
+ * @current_bw: current link rate
+ *
+ * Find the link configuration values, rate and lane count for requested pixel
+ * clock @pclock. The @pclock is stored in the mode to be used in other
+ * functions later. The returned rate is downshifted from the current rate
+ * @current_bw.
+ *
+ * Return: Current link rate code, or -EINVAL.
+ */
+static int zynqmp_dp_mode_configure(struct zynqmp_dp *dp, int pclock,
+				    u8 current_bw)
+{
+	int max_rate = dp->link_config.max_rate;
+	u8 bws[3] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
+	u8 max_lanes = dp->link_config.max_lanes;
+	u8 max_link_rate_code = drm_dp_link_rate_to_bw_code(max_rate);
+	u8 bpp = dp->config.bpp;
+	u8 lane_cnt;
+	s8 i;
+
+	if (current_bw == DP_LINK_BW_1_62) {
+		dev_err(dp->dev, "can't downshift. already lowest link rate\n");
+		return -EINVAL;
+	}
+
+	for (i = ARRAY_SIZE(bws) - 1; i >= 0; i--) {
+		if (current_bw && bws[i] >= current_bw)
+			continue;
+
+		if (bws[i] <= max_link_rate_code)
+			break;
+	}
+
+	for (lane_cnt = 1; lane_cnt <= max_lanes; lane_cnt <<= 1) {
+		int bw;
+		u32 rate;
+
+		bw = drm_dp_bw_code_to_link_rate(bws[i]);
+		rate = zynqmp_dp_max_rate(bw, lane_cnt, bpp);
+		if (pclock <= rate) {
+			dp->mode.bw_code = bws[i];
+			dp->mode.lane_cnt = lane_cnt;
+			dp->mode.pclock = pclock;
+			return dp->mode.bw_code;
+		}
+	}
+
+	dev_err(dp->dev, "failed to configure link values\n");
+
+	return -EINVAL;
+}
+
+/**
+ * zynqmp_dp_adjust_train - Adjust train values
+ * @dp: DisplayPort IP core structure
+ * @link_status: link status from sink which contains requested training values
+ */
+static void zynqmp_dp_adjust_train(struct zynqmp_dp *dp,
+				   u8 link_status[DP_LINK_STATUS_SIZE])
+{
+	u8 *train_set = dp->train_set;
+	u8 voltage = 0, preemphasis = 0;
+	u8 i;
+
+	for (i = 0; i < dp->mode.lane_cnt; i++) {
+		u8 v = drm_dp_get_adjust_request_voltage(link_status, i);
+		u8 p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+
+		if (v > voltage)
+			voltage = v;
+
+		if (p > preemphasis)
+			preemphasis = p;
+	}
+
+	if (voltage >= DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
+		voltage |= DP_TRAIN_MAX_SWING_REACHED;
+
+	if (preemphasis >= DP_TRAIN_PRE_EMPH_LEVEL_2)
+		preemphasis |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	for (i = 0; i < dp->mode.lane_cnt; i++)
+		train_set[i] = voltage | preemphasis;
+}
+
+/**
+ * zynqmp_dp_update_vs_emph - Update the training values
+ * @dp: DisplayPort IP core structure
+ *
+ * Update the training values based on the request from sink. The mapped values
+ * are predefined, and values(vs, pe, pc) are from the device manual.
+ *
+ * Return: 0 if vs and emph are updated successfully, or the error code returned
+ * by drm_dp_dpcd_write().
+ */
+static int zynqmp_dp_update_vs_emph(struct zynqmp_dp *dp)
+{
+	u8 *train_set = dp->train_set;
+	u8 i, v_level, p_level;
+	int ret;
+
+	ret = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, train_set,
+				dp->mode.lane_cnt);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < dp->mode.lane_cnt; i++) {
+		u32 reg = ZYNQMP_DP_SUB_TX_PHY_PRECURSOR_LANE_0 + i * 4;
+
+		v_level = (train_set[i] & DP_TRAIN_VOLTAGE_SWING_MASK) >>
+			  DP_TRAIN_VOLTAGE_SWING_SHIFT;
+		p_level = (train_set[i] & DP_TRAIN_PRE_EMPHASIS_MASK) >>
+			  DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+		zynqmp_dp_write(dp->iomem, reg, 0x2);
+	}
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_link_train_cr - Train clock recovery
+ * @dp: DisplayPort IP core structure
+ *
+ * Return: 0 if clock recovery train is done successfully, or corresponding
+ * error code.
+ */
+static int zynqmp_dp_link_train_cr(struct zynqmp_dp *dp)
+{
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	u8 lane_cnt = dp->mode.lane_cnt;
+	u8 vs = 0, tries = 0;
+	u16 max_tries, i;
+	bool cr_done;
+	int ret;
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRAINING_PATTERN_SET,
+			DP_TRAINING_PATTERN_1);
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				 DP_TRAINING_PATTERN_1 |
+				 DP_LINK_SCRAMBLING_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * 256 loops should be maximum iterations for 4 lanes and 4 values.
+	 * So, This loop should exit before 512 iterations
+	 */
+	for (max_tries = 0; max_tries < 512; max_tries++) {
+		ret = zynqmp_dp_update_vs_emph(dp);
+		if (ret)
+			return ret;
+
+		drm_dp_link_train_clock_recovery_delay(dp->dpcd);
+		ret = drm_dp_dpcd_read_link_status(&dp->aux, link_status);
+		if (ret < 0)
+			return ret;
+
+		cr_done = drm_dp_clock_recovery_ok(link_status, lane_cnt);
+		if (cr_done)
+			break;
+
+		for (i = 0; i < lane_cnt; i++)
+			if (!(dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED))
+				break;
+		if (i == lane_cnt)
+			break;
+
+		if ((dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == vs)
+			tries++;
+		else
+			tries = 0;
+
+		if (tries == DP_MAX_TRAINING_TRIES)
+			break;
+
+		vs = dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+		zynqmp_dp_adjust_train(dp, link_status);
+	}
+
+	if (!cr_done)
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_link_train_ce - Train channel equalization
+ * @dp: DisplayPort IP core structure
+ *
+ * Return: 0 if channel equalization train is done successfully, or
+ * corresponding error code.
+ */
+static int zynqmp_dp_link_train_ce(struct zynqmp_dp *dp)
+{
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	u8 lane_cnt = dp->mode.lane_cnt;
+	u32 pat, tries;
+	int ret;
+	bool ce_done;
+
+	if (dp->dpcd[DP_DPCD_REV] >= DP_V1_2 &&
+	    dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED)
+		pat = DP_TRAINING_PATTERN_3;
+	else
+		pat = DP_TRAINING_PATTERN_2;
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRAINING_PATTERN_SET, pat);
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				 pat | DP_LINK_SCRAMBLING_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	for (tries = 0; tries < DP_MAX_TRAINING_TRIES; tries++) {
+		ret = zynqmp_dp_update_vs_emph(dp);
+		if (ret)
+			return ret;
+
+		drm_dp_link_train_channel_eq_delay(dp->dpcd);
+		ret = drm_dp_dpcd_read_link_status(&dp->aux, link_status);
+		if (ret < 0)
+			return ret;
+
+		ce_done = drm_dp_channel_eq_ok(link_status, lane_cnt);
+		if (ce_done)
+			break;
+
+		zynqmp_dp_adjust_train(dp, link_status);
+	}
+
+	if (!ce_done)
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_link_train - Train the link
+ * @dp: DisplayPort IP core structure
+ *
+ * Return: 0 if all trains are done successfully, or corresponding error code.
+ */
+static int zynqmp_dp_train(struct zynqmp_dp *dp)
+{
+	u32 reg;
+	u8 bw_code = dp->mode.bw_code;
+	u8 lane_cnt = dp->mode.lane_cnt;
+	u8 aux_lane_cnt = lane_cnt;
+	bool enhanced;
+	int ret;
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_LANE_CNT_SET, lane_cnt);
+	enhanced = drm_dp_enhanced_frame_cap(dp->dpcd);
+	if (enhanced) {
+		zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENHANCED_FRAME_EN, 1);
+		aux_lane_cnt |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+	}
+
+	if (dp->dpcd[3] & 0x1) {
+		zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_DOWNSPREAD_CTL, 1);
+		drm_dp_dpcd_writeb(&dp->aux, DP_DOWNSPREAD_CTRL,
+				   DP_SPREAD_AMP_0_5);
+	} else {
+		zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_DOWNSPREAD_CTL, 0);
+		drm_dp_dpcd_writeb(&dp->aux, DP_DOWNSPREAD_CTRL, 0);
+	}
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET, aux_lane_cnt);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to set lane count\n");
+		return ret;
+	}
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
+				 DP_SET_ANSI_8B10B);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to set ANSI 8B/10B encoding\n");
+		return ret;
+	}
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_LINK_BW_SET, bw_code);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to set DP bandwidth\n");
+		return ret;
+	}
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_LINK_BW_SET, bw_code);
+	switch (bw_code) {
+	case DP_LINK_BW_1_62:
+		reg = ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_162;
+		break;
+	case DP_LINK_BW_2_7:
+		reg = ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_270;
+		break;
+	case DP_LINK_BW_5_4:
+	default:
+		reg = ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_540;
+		break;
+	}
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING,
+			reg);
+	ret = zynqmp_dp_phy_ready(dp);
+	if (ret < 0)
+		return ret;
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_SCRAMBLING_DISABLE, 1);
+	memset(dp->train_set, 0, 4);
+	ret = zynqmp_dp_link_train_cr(dp);
+	if (ret)
+		return ret;
+
+	ret = zynqmp_dp_link_train_ce(dp);
+	if (ret)
+		return ret;
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				 DP_TRAINING_PATTERN_DISABLE);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to disable training pattern\n");
+		return ret;
+	}
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRAINING_PATTERN_SET,
+			DP_TRAINING_PATTERN_DISABLE);
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_SCRAMBLING_DISABLE, 0);
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_train_loop - Downshift the link rate during training
+ * @dp: DisplayPort IP core structure
+ *
+ * Train the link by downshifting the link rate if training is not successful.
+ */
+static void zynqmp_dp_train_loop(struct zynqmp_dp *dp)
+{
+	struct zynqmp_dp_mode *mode = &dp->mode;
+	u8 bw = mode->bw_code;
+	int ret;
+
+	do {
+		if (dp->status == connector_status_disconnected ||
+		    !dp->enabled)
+			return;
+
+		ret = zynqmp_dp_train(dp);
+		if (!ret)
+			return;
+
+		ret = zynqmp_dp_mode_configure(dp, mode->pclock, bw);
+		if (ret < 0)
+			goto err_out;
+
+		bw = ret;
+	} while (bw >= DP_LINK_BW_1_62);
+
+err_out:
+	dev_err(dp->dev, "failed to train the DP link\n");
+}
+
+/*
+ * DP Aux functions
+ */
+
+#define AUX_READ_BIT	0x1
+
+/**
+ * zynqmp_dp_aux_cmd_submit - Submit aux command
+ * @dp: DisplayPort IP core structure
+ * @cmd: aux command
+ * @addr: aux address
+ * @buf: buffer for command data
+ * @bytes: number of bytes for @buf
+ * @reply: reply code to be returned
+ *
+ * Submit an aux command. All aux related commands, native or i2c aux
+ * read/write, are submitted through this function. The function is mapped to
+ * the transfer function of struct drm_dp_aux. This function involves in
+ * multiple register reads/writes, thus synchronization is needed, and it is
+ * done by drm_dp_helper using @hw_mutex. The calling thread goes into sleep
+ * if there's no immediate reply to the command submission. The reply code is
+ * returned at @reply if @reply != NULL.
+ *
+ * Return: 0 if the command is submitted properly, or corresponding error code:
+ * -EBUSY when there is any request already being processed
+ * -ETIMEDOUT when receiving reply is timed out
+ * -EIO when received bytes are less than requested
+ */
+static int zynqmp_dp_aux_cmd_submit(struct zynqmp_dp *dp, u32 cmd, u16 addr,
+				    u8 *buf, u8 bytes, u8 *reply)
+{
+	bool is_read = (cmd & AUX_READ_BIT) ? true : false;
+	void __iomem *iomem = dp->iomem;
+	u32 reg, i;
+
+	reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_INTR_SIGNAL_STATE);
+	if (reg & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REQUEST)
+		return -EBUSY;
+
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUX_ADDRESS, addr);
+	if (!is_read)
+		for (i = 0; i < bytes; i++)
+			zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUX_WRITE_FIFO,
+					buf[i]);
+
+	reg = cmd << ZYNQMP_DP_TX_AUX_COMMAND_CMD_SHIFT;
+	if (!buf || !bytes)
+		reg |= ZYNQMP_DP_TX_AUX_COMMAND_ADDRESS_ONLY;
+	else
+		reg |= (bytes - 1) << ZYNQMP_DP_TX_AUX_COMMAND_BYTES_SHIFT;
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUX_COMMAND, reg);
+
+	/* Wait for reply to be delivered upto 2ms */
+	for (i = 0; ; i++) {
+		reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_INTR_SIGNAL_STATE);
+		if (reg & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY)
+			break;
+
+		if (reg & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY_TIMEOUT ||
+		    i == 2)
+			return -ETIMEDOUT;
+
+		usleep_range(1000, 1100);
+	}
+
+	reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_AUX_REPLY_CODE);
+	if (reply)
+		*reply = reg;
+
+	if (is_read &&
+	    (reg == ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_ACK ||
+	     reg == ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_ACK)) {
+		reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_REPLY_DATA_CNT);
+		if ((reg & ZYNQMP_DP_TX_AUX_REPLY_CNT_MASK) != bytes)
+			return -EIO;
+
+		for (i = 0; i < bytes; i++) {
+			buf[i] = zynqmp_dp_read(iomem,
+						ZYNQMP_DP_TX_AUX_REPLY_DATA);
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t
+zynqmp_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
+{
+	struct zynqmp_dp *dp = container_of(aux, struct zynqmp_dp, aux);
+	int ret;
+	unsigned int i, iter;
+
+	/* Number of loops = timeout in msec / aux delay (400 usec) */
+	iter = zynqmp_dp_aux_timeout_ms * 1000 / 400;
+	iter = iter ? iter : 1;
+
+	for (i = 0; i < iter; i++) {
+		ret = zynqmp_dp_aux_cmd_submit(dp, msg->request, msg->address,
+					       msg->buffer, msg->size,
+					       &msg->reply);
+		if (!ret) {
+			dev_dbg(dp->dev, "aux %d retries\n", i);
+			return msg->size;
+		}
+
+		if (dp->status == connector_status_disconnected) {
+			dev_dbg(dp->dev, "no connected aux device\n");
+			return -ENODEV;
+		}
+
+		usleep_range(400, 500);
+	}
+
+	dev_dbg(dp->dev, "failed to do aux transfer (%d)\n", ret);
+
+	return ret;
+}
+
+/**
+ * zynqmp_dp_init_aux - Initialize the DP aux
+ * @dp: DisplayPort IP core structure
+ *
+ * Initialize the DP aux. The aux clock is derived from the axi clock, so
+ * this function gets the axi clock frequency and calculates the filter
+ * value. Additionally, the interrupts and transmitter are enabled.
+ *
+ * Return: 0 on success, error value otherwise
+ */
+static int zynqmp_dp_init_aux(struct zynqmp_dp *dp)
+{
+	unsigned int rate;
+	u32 reg, w;
+
+	rate = zynqmp_disp_get_apb_clk_rate(dp->dpsub->disp);
+	if (rate < ZYNQMP_DP_TX_CLK_DIVIDER_MHZ) {
+		dev_err(dp->dev, "aclk should be higher than 1MHz\n");
+		return -EINVAL;
+	}
+
+	/* Allowable values for this register are: 8, 16, 24, 32, 40, 48 */
+	for (w = 8; w <= 48; w += 8) {
+		/* AUX pulse width should be between 0.4 to 0.6 usec */
+		if (w >= (4 * rate / 10000000) &&
+		    w <= (6 * rate / 10000000))
+			break;
+	}
+
+	if (w > 48) {
+		dev_err(dp->dev, "aclk frequency too high\n");
+		return -EINVAL;
+	}
+	reg = w << ZYNQMP_DP_TX_CLK_DIVIDER_AUX_FILTER_SHIFT;
+	reg |= rate / ZYNQMP_DP_TX_CLK_DIVIDER_MHZ;
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_CLK_DIVIDER, reg);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_EN,
+			ZYNQMP_DP_TX_INTR_ALL);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS,
+			ZYNQMP_DP_TX_NO_INTR_ALL);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 1);
+
+	return 0;
+}
+
+/**
+ * zynqmp_dp_exit_aux - De-initialize the DP aux
+ * @dp: DisplayPort IP core structure
+ *
+ * De-initialize the DP aux. Disable all interrupts which are enabled
+ * through aux initialization, as well as the transmitter.
+ */
+static void zynqmp_dp_exit_aux(struct zynqmp_dp *dp)
+{
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 0);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS, 0xffffffff);
+}
+
+/*
+ * Generic DP functions
+ */
+
+/**
+ * zynqmp_dp_update_misc - Write the misc registers
+ * @dp: DisplayPort IP core structure
+ *
+ * The misc register values are stored in the structure, and this
+ * function applies the values into the registers.
+ */
+static void zynqmp_dp_update_misc(struct zynqmp_dp *dp)
+{
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_MAIN_STREAM_MISC0,
+			dp->config.misc0);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_MAIN_STREAM_MISC1,
+			dp->config.misc1);
+}
+
+/**
+ * zynqmp_dp_set_sync_mode - Set the sync mode bit in the software misc state
+ * @dp: DisplayPort IP core structure
+ * @mode: flag if the sync mode should be on or off
+ *
+ * Set the bit in software misc state. To apply to hardware,
+ * zynqmp_dp_update_misc() should be called.
+ */
+static void zynqmp_dp_set_sync_mode(struct zynqmp_dp *dp, bool mode)
+{
+	struct zynqmp_dp_config *config = &dp->config;
+
+	if (mode)
+		config->misc0 |= ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC;
+	else
+		config->misc0 &= ~ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC;
+}
+
+/**
+ * zynqmp_dp_get_sync_mode - Get the sync mode state
+ * @dp: DisplayPort IP core structure
+ *
+ * Return: true if the sync mode is on, or false
+ */
+static bool zynqmp_dp_get_sync_mode(struct zynqmp_dp *dp)
+{
+	struct zynqmp_dp_config *config = &dp->config;
+
+	return !!(config->misc0 & ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC);
+}
+
+/**
+ * zynqmp_dp_set_bpc - Set bpc value in software misc state
+ * @dp: DisplayPort IP core structure
+ * @bpc: bits per component
+ *
+ * Return: 0 on success, or the fallback bpc value
+ */
+static u8 zynqmp_dp_set_bpc(struct zynqmp_dp *dp, u8 bpc)
+{
+	struct zynqmp_dp_config *config = &dp->config;
+	u8 ret = 0;
+
+	if (dp->connector.display_info.bpc &&
+	    dp->connector.display_info.bpc != bpc) {
+		dev_err(dp->dev, "requested bpc (%u) != display info (%u)\n",
+			bpc, dp->connector.display_info.bpc);
+		bpc = dp->connector.display_info.bpc;
+	}
+
+	config->misc0 &= ~ZYNQMP_DP_MISC0_BPC_MASK;
+	switch (bpc) {
+	case 6:
+		config->misc0 |= ZYNQMP_DP_MISC0_BPC_6;
+		break;
+	case 8:
+		config->misc0 |= ZYNQMP_DP_MISC0_BPC_8;
+		break;
+	case 10:
+		config->misc0 |= ZYNQMP_DP_MISC0_BPC_10;
+		break;
+	case 12:
+		config->misc0 |= ZYNQMP_DP_MISC0_BPC_12;
+		break;
+	case 16:
+		config->misc0 |= ZYNQMP_DP_MISC0_BPC_16;
+		break;
+	default:
+		dev_err(dp->dev, "Not supported bpc (%u). fall back to 8bpc\n",
+			bpc);
+		config->misc0 |= ZYNQMP_DP_MISC0_BPC_8;
+		ret = 8;
+		break;
+	}
+	config->bpc = bpc;
+	zynqmp_dp_update_bpp(dp);
+
+	return ret;
+}
+
+/**
+ * zynqmp_dp_get_bpc - Set bpc value from software state
+ * @dp: DisplayPort IP core structure
+ *
+ * Return: current bpc value
+ */
+static u8 zynqmp_dp_get_bpc(struct zynqmp_dp *dp)
+{
+	return dp->config.bpc;
+}
+
+/**
+ * zynqmp_dp_encoder_mode_set_transfer_unit - Set the transfer unit values
+ * @dp: DisplayPort IP core structure
+ * @mode: requested display mode
+ *
+ * Set the transfer unit, and caculate all transfer unit size related values.
+ * Calculation is based on DP and IP core specification.
+ */
+static void
+zynqmp_dp_encoder_mode_set_transfer_unit(struct zynqmp_dp *dp,
+					 struct drm_display_mode *mode)
+{
+	u32 tu = ZYNQMP_DP_TX_DEF_TRANSFER_UNIT_SIZE;
+	u32 bw, vid_kbytes, avg_bytes_per_tu, init_wait;
+
+	/* Use the max transfer unit size (default) */
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRANSFER_UNIT_SIZE, tu);
+
+	vid_kbytes = mode->clock * (dp->config.bpp / 8);
+	bw = drm_dp_bw_code_to_link_rate(dp->mode.bw_code);
+	avg_bytes_per_tu = vid_kbytes * tu / (dp->mode.lane_cnt * bw / 1000);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_MIN_BYTES_PER_TU,
+			avg_bytes_per_tu / 1000);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_FRAC_BYTES_PER_TU,
+			avg_bytes_per_tu % 1000);
+
+	/* Configure the initial wait cycle based on transfer unit size */
+	if (tu < (avg_bytes_per_tu / 1000))
+		init_wait = 0;
+	else if ((avg_bytes_per_tu / 1000) <= 4)
+		init_wait = tu;
+	else
+		init_wait = tu - avg_bytes_per_tu / 1000;
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_INIT_WAIT, init_wait);
+}
+
+/**
+ * zynqmp_dp_encoder_mode_set_stream - Configure the main stream
+ * @dp: DisplayPort IP core structure
+ * @mode: requested display mode
+ *
+ * Configure the main stream based on the requested mode @mode. Calculation is
+ * based on IP core specification.
+ */
+void zynqmp_dp_encoder_mode_set_stream(struct zynqmp_dp *dp,
+				       struct drm_display_mode *mode)
+{
+	void __iomem *iomem = dp->iomem;
+	u8 lane_cnt = dp->mode.lane_cnt;
+	u32 reg, wpl;
+	unsigned int rate;
+
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HTOTAL, mode->htotal);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VTOTAL, mode->vtotal);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_POLARITY,
+			(!!(mode->flags & DRM_MODE_FLAG_PVSYNC) <<
+			 ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_VSYNC_SHIFT) |
+			(!!(mode->flags & DRM_MODE_FLAG_PHSYNC) <<
+			 ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_HSYNC_SHIFT));
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HSWIDTH,
+			mode->hsync_end - mode->hsync_start);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VSWIDTH,
+			mode->vsync_end - mode->vsync_start);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HRES, mode->hdisplay);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VRES, mode->vdisplay);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HSTART,
+			mode->htotal - mode->hsync_start);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VSTART,
+			mode->vtotal - mode->vsync_start);
+
+	/* In synchronous mode, set the diviers */
+	if (dp->config.misc0 & ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC) {
+		reg = drm_dp_bw_code_to_link_rate(dp->mode.bw_code);
+		zynqmp_dp_write(iomem, ZYNQMP_DP_TX_N_VID, reg);
+		zynqmp_dp_write(iomem, ZYNQMP_DP_TX_M_VID, mode->clock);
+		rate = zynqmp_disp_get_aud_clk_rate(dp->dpsub->disp);
+		if (rate) {
+			dev_dbg(dp->dev, "Audio rate: %d\n", rate / 512);
+			zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_N_AUD, reg);
+			zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_M_AUD,
+					rate / 1000);
+		}
+	}
+
+	/* Only 2 channel audio is supported now */
+	if (zynqmp_disp_aud_enabled(dp->dpsub->disp))
+		zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_CHANNELS, 1);
+
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_USER_PIXEL_WIDTH, 1);
+
+	/* Translate to the native 16 bit datapath based on IP core spec */
+	wpl = (mode->hdisplay * dp->config.bpp + 15) / 16;
+	reg = wpl + wpl % lane_cnt - lane_cnt;
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_USER_DATA_CNT_PER_LANE, reg);
+}
+
+/*
+ * DRM property functions
+ */
+
+static struct drm_prop_enum_list zynqmp_dp_bpc_enum[] = {
+	{ 6, "6BPC" },
+	{ 8, "8BPC" },
+	{ 10, "10BPC" },
+	{ 12, "12BPC" },
+};
+
+static void
+zynqmp_dp_attach_property(struct zynqmp_dp *dp, struct drm_mode_object *obj)
+{
+	struct zynqmp_dp_config *config = &dp->config;
+	u8 ret;
+
+	config->misc0 &= ~ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC;
+	drm_object_attach_property(obj, dp->sync_prop, false);
+	ret = zynqmp_dp_set_bpc(dp, 8);
+	drm_object_attach_property(obj, dp->bpc_prop, ret ? ret : 8);
+	zynqmp_dp_update_bpp(dp);
+}
+
+static void zynqmp_dp_create_property(struct zynqmp_dp *dp)
+{
+	int num;
+
+	dp->sync_prop = drm_property_create_bool(dp->drm, 0, "sync");
+	num = ARRAY_SIZE(zynqmp_dp_bpc_enum);
+	dp->bpc_prop = drm_property_create_enum(dp->drm, 0, "bpc",
+						zynqmp_dp_bpc_enum, num);
+}
+
+static void zynqmp_dp_destroy_property(struct zynqmp_dp *dp)
+{
+	drm_property_destroy(dp->drm, dp->bpc_prop);
+	drm_property_destroy(dp->drm, dp->sync_prop);
+}
+
+/*
+ * DRM connector functions
+ */
+
+static enum drm_connector_status
+zynqmp_dp_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct zynqmp_dp *dp = connector_to_dp(connector);
+	struct zynqmp_dp_link_config *link_config = &dp->link_config;
+	u32 state, i;
+	int ret;
+
+	/*
+	 * This is from heuristic. It takes some delay (ex, 100 ~ 500 msec) to
+	 * get the HPD signal with some monitors.
+	 */
+	for (i = 0; i < 10; i++) {
+		state = zynqmp_dp_read(dp->iomem,
+				       ZYNQMP_DP_TX_INTR_SIGNAL_STATE);
+		if (state & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_HPD)
+			break;
+		msleep(100);
+	}
+
+	if (state & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_HPD) {
+		ret = drm_dp_dpcd_read(&dp->aux, 0x0, dp->dpcd,
+				       sizeof(dp->dpcd));
+		if (ret < 0) {
+			dev_dbg(dp->dev, "DPCD read failes");
+			goto disconnected;
+		}
+
+		link_config->max_rate = min_t(int,
+					      drm_dp_max_link_rate(dp->dpcd),
+					      DP_HIGH_BIT_RATE2);
+		link_config->max_lanes = min_t(u8,
+					       drm_dp_max_lane_count(dp->dpcd),
+					       dp->num_lanes);
+
+		dp->status = connector_status_connected;
+		return connector_status_connected;
+	}
+
+disconnected:
+	dp->status = connector_status_disconnected;
+	return connector_status_disconnected;
+}
+
+static int zynqmp_dp_connector_get_modes(struct drm_connector *connector)
+{
+	struct zynqmp_dp *dp = connector_to_dp(connector);
+	struct edid *edid;
+	int ret;
+
+	edid = drm_get_edid(connector, &dp->aux.ddc);
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
+}
+
+static struct drm_encoder *
+zynqmp_dp_connector_best_encoder(struct drm_connector *connector)
+{
+	struct zynqmp_dp *dp = connector_to_dp(connector);
+
+	return &dp->encoder;
+}
+
+static int zynqmp_dp_connector_mode_valid(struct drm_connector *connector,
+					  struct drm_display_mode *mode)
+{
+	struct zynqmp_dp *dp = connector_to_dp(connector);
+	u8 max_lanes = dp->link_config.max_lanes;
+	u8 bpp = dp->config.bpp;
+	int max_rate = dp->link_config.max_rate;
+	int rate;
+
+	if (mode->clock > ZYNQMP_MAX_FREQ) {
+		dev_dbg(dp->dev, "filtered the mode, %s,for high pixel rate\n",
+			mode->name);
+		drm_mode_debug_printmodeline(mode);
+		return MODE_CLOCK_HIGH;
+	}
+
+	/* Check with link rate and lane count */
+	rate = zynqmp_dp_max_rate(max_rate, max_lanes, bpp);
+	if (mode->clock > rate) {
+		dev_dbg(dp->dev, "filtered the mode, %s,for high pixel rate\n",
+			mode->name);
+		drm_mode_debug_printmodeline(mode);
+		return MODE_CLOCK_HIGH;
+	}
+
+	return MODE_OK;
+}
+
+static void zynqmp_dp_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static int
+zynqmp_dp_connector_atomic_set_property(struct drm_connector *connector,
+					struct drm_connector_state *state,
+					struct drm_property *property,
+					uint64_t val)
+{
+	struct zynqmp_dp *dp = connector_to_dp(connector);
+	int ret;
+
+	if (property == dp->sync_prop) {
+		zynqmp_dp_set_sync_mode(dp, val);
+	} else if (property == dp->bpc_prop) {
+		u8 bpc;
+
+		bpc = zynqmp_dp_set_bpc(dp, val);
+		if (bpc) {
+			drm_object_property_set_value(&connector->base,
+						      property, bpc);
+			ret = -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+zynqmp_dp_connector_atomic_get_property(struct drm_connector *connector,
+					const struct drm_connector_state *state,
+					struct drm_property *property,
+					uint64_t *val)
+{
+	struct zynqmp_dp *dp = connector_to_dp(connector);
+
+	if (property == dp->sync_prop)
+		*val = zynqmp_dp_get_sync_mode(dp);
+	else if (property == dp->bpc_prop)
+		*val =  zynqmp_dp_get_bpc(dp);
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct drm_connector_funcs zynqmp_dp_connector_funcs = {
+	.detect			= zynqmp_dp_connector_detect,
+	.fill_modes		= drm_helper_probe_single_connector_modes,
+	.destroy		= zynqmp_dp_connector_destroy,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.reset			= drm_atomic_helper_connector_reset,
+	.atomic_set_property	= zynqmp_dp_connector_atomic_set_property,
+	.atomic_get_property	= zynqmp_dp_connector_atomic_get_property,
+};
+
+static struct drm_connector_helper_funcs zynqmp_dp_connector_helper_funcs = {
+	.get_modes	= zynqmp_dp_connector_get_modes,
+	.best_encoder	= zynqmp_dp_connector_best_encoder,
+	.mode_valid	= zynqmp_dp_connector_mode_valid,
+};
+
+/*
+ * DRM encoder functions
+ */
+
+static void zynqmp_dp_encoder_enable(struct drm_encoder *encoder)
+{
+	struct zynqmp_dp *dp = encoder_to_dp(encoder);
+	void __iomem *iomem = dp->iomem;
+	unsigned int i;
+	int ret = 0;
+
+	pm_runtime_get_sync(dp->dev);
+	dp->enabled = true;
+	zynqmp_dp_init_aux(dp);
+	zynqmp_dp_update_misc(dp);
+	if (zynqmp_disp_aud_enabled(dp->dpsub->disp))
+		zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_CONTROL, 1);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_PHY_POWER_DOWN, 0);
+	if (dp->status == connector_status_connected) {
+		for (i = 0; i < 3; i++) {
+			ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER,
+						 DP_SET_POWER_D0);
+			if (ret == 1)
+				break;
+			usleep_range(300, 500);
+		}
+		/* Some monitors take time to wake up properly */
+		msleep(zynqmp_dp_power_on_delay_ms);
+	}
+	if (ret != 1)
+		dev_dbg(dp->dev, "DP aux failed\n");
+	else
+		zynqmp_dp_train_loop(dp);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_SW_RESET,
+			ZYNQMP_DP_TX_SW_RESET_ALL);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_ENABLE_MAIN_STREAM, 1);
+}
+
+static void zynqmp_dp_encoder_disable(struct drm_encoder *encoder)
+{
+	struct zynqmp_dp *dp = encoder_to_dp(encoder);
+	void __iomem *iomem = dp->iomem;
+
+	dp->enabled = false;
+	cancel_delayed_work(&dp->hpd_work);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_ENABLE_MAIN_STREAM, 0);
+	drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D3);
+	zynqmp_dp_write(iomem, ZYNQMP_DP_TX_PHY_POWER_DOWN,
+			ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL);
+	if (zynqmp_disp_aud_enabled(dp->dpsub->disp))
+		zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_CONTROL, 0);
+	pm_runtime_put_sync(dp->dev);
+}
+
+static void
+zynqmp_dp_encoder_atomic_mode_set(struct drm_encoder *encoder,
+				  struct drm_crtc_state *crtc_state,
+				  struct drm_connector_state *connector_state)
+{
+	struct zynqmp_dp *dp = encoder_to_dp(encoder);
+	struct drm_display_mode *mode = &crtc_state->mode;
+	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+	u8 max_lanes = dp->link_config.max_lanes;
+	u8 bpp = dp->config.bpp;
+	int rate, max_rate = dp->link_config.max_rate;
+	int ret;
+
+	/* Check again as bpp or format might have been chagned */
+	rate = zynqmp_dp_max_rate(max_rate, max_lanes, bpp);
+	if (mode->clock > rate) {
+		dev_err(dp->dev, "the mode, %s,has too high pixel rate\n",
+			mode->name);
+		drm_mode_debug_printmodeline(mode);
+	}
+
+	ret = zynqmp_dp_mode_configure(dp, adjusted_mode->clock, 0);
+	if (ret < 0)
+		return;
+
+	zynqmp_dp_encoder_mode_set_transfer_unit(dp, adjusted_mode);
+}
+
+#define ZYNQMP_DP_MIN_H_BACKPORCH	20
+
+static int
+zynqmp_dp_encoder_atomic_check(struct drm_encoder *encoder,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_connector_state *conn_state)
+{
+	struct drm_display_mode *mode = &crtc_state->mode;
+	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+	int diff = mode->htotal - mode->hsync_end;
+
+	/*
+	 * ZynqMP DP requires horizontal backporch to be greater than 12.
+	 * This limitation may not be compatible with the sink device.
+	 */
+	if (diff < ZYNQMP_DP_MIN_H_BACKPORCH) {
+		int vrefresh = (adjusted_mode->clock * 1000) /
+			       (adjusted_mode->vtotal * adjusted_mode->htotal);
+
+		dev_dbg(encoder->dev->dev, "hbackporch adjusted: %d to %d",
+			diff, ZYNQMP_DP_MIN_H_BACKPORCH - diff);
+		diff = ZYNQMP_DP_MIN_H_BACKPORCH - diff;
+		adjusted_mode->htotal += diff;
+		adjusted_mode->clock = adjusted_mode->vtotal *
+				       adjusted_mode->htotal * vrefresh / 1000;
+	}
+
+	return 0;
+}
+
+static const struct drm_encoder_funcs zynqmp_dp_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static const struct drm_encoder_helper_funcs zynqmp_dp_encoder_helper_funcs = {
+	.enable			= zynqmp_dp_encoder_enable,
+	.disable		= zynqmp_dp_encoder_disable,
+	.atomic_mode_set	= zynqmp_dp_encoder_atomic_mode_set,
+	.atomic_check		= zynqmp_dp_encoder_atomic_check,
+};
+
+/*
+ * Component functions
+ */
+
+static void zynqmp_dp_hpd_work_func(struct work_struct *work)
+{
+	struct zynqmp_dp *dp;
+
+	dp = container_of(work, struct zynqmp_dp, hpd_work.work);
+
+	if (dp->drm)
+		drm_helper_hpd_irq_event(dp->drm);
+}
+
+int zynqmp_dp_bind(struct device *dev, struct device *master, void *data)
+{
+	struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev);
+	struct zynqmp_dp *dp = dpsub->dp;
+	struct drm_encoder *encoder = &dp->encoder;
+	struct drm_connector *connector = &dp->connector;
+	struct drm_device *drm = data;
+	struct device_node *port;
+	int ret;
+
+	encoder->possible_crtcs |= zynqmp_disp_get_crtc_mask(dpsub->disp);
+	for_each_child_of_node(dev->of_node, port) {
+		if (!port->name || of_node_cmp(port->name, "port"))
+			continue;
+		encoder->possible_crtcs |= drm_of_find_possible_crtcs(drm,
+								      port);
+	}
+	drm_encoder_init(drm, encoder, &zynqmp_dp_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_encoder_helper_add(encoder, &zynqmp_dp_encoder_helper_funcs);
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+	ret = drm_connector_init(encoder->dev, connector,
+				 &zynqmp_dp_connector_funcs,
+				 DRM_MODE_CONNECTOR_DisplayPort);
+	if (ret) {
+		dev_err(dp->dev, "failed to initialize the drm connector");
+		goto error_encoder;
+	}
+
+	drm_connector_helper_add(connector, &zynqmp_dp_connector_helper_funcs);
+	drm_connector_register(connector);
+	drm_mode_connector_attach_encoder(connector, encoder);
+	connector->dpms = DRM_MODE_DPMS_OFF;
+
+	dp->drm = drm;
+	zynqmp_dp_create_property(dp);
+	zynqmp_dp_attach_property(dp, &connector->base);
+
+	/* This enables interrupts, so should be called after DRM init */
+	ret = zynqmp_dp_init_aux(dp);
+	if (ret) {
+		dev_err(dp->dev, "failed to initialize DP aux");
+		goto error_prop;
+	}
+	INIT_DELAYED_WORK(&dp->hpd_work, zynqmp_dp_hpd_work_func);
+
+	return 0;
+
+error_prop:
+	zynqmp_dp_destroy_property(dp);
+	zynqmp_dp_connector_destroy(&dp->connector);
+error_encoder:
+	drm_encoder_cleanup(&dp->encoder);
+	return ret;
+}
+
+void zynqmp_dp_unbind(struct device *dev, struct device *master, void *data)
+{
+	struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev);
+	struct zynqmp_dp *dp = dpsub->dp;
+
+	cancel_delayed_work_sync(&dp->hpd_work);
+	disable_irq(dp->irq);
+	zynqmp_dp_exit_aux(dp);
+	zynqmp_dp_destroy_property(dp);
+	zynqmp_dp_connector_destroy(&dp->connector);
+	drm_encoder_cleanup(&dp->encoder);
+}
+
+/*
+ * Platform functions
+ */
+
+static irqreturn_t zynqmp_dp_irq_handler(int irq, void *data)
+{
+	struct zynqmp_dp *dp = (struct zynqmp_dp *)data;
+	u32 status, mask;
+
+	status = zynqmp_dp_read(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_STATUS);
+	mask = zynqmp_dp_read(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_MASK);
+	if (!(status & ~mask))
+		return IRQ_NONE;
+
+	/* dbg for diagnostic, but not much that the driver can do */
+	if (status & ZYNQMP_DP_TX_INTR_CHBUF_UNDERFLW_MASK)
+		dev_dbg_ratelimited(dp->dev, "underflow interrupt\n");
+	if (status & ZYNQMP_DP_TX_INTR_CHBUF_OVERFLW_MASK)
+		dev_dbg_ratelimited(dp->dev, "overflow interrupt\n");
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_STATUS, status);
+
+	/* The DP vblank will not be enabled with remote crtc device */
+	if (status & ZYNQMP_DP_TX_INTR_VBLANK_START)
+		zynqmp_disp_handle_vblank(dp->dpsub->disp);
+
+	if (status & ZYNQMP_DP_TX_INTR_HPD_EVENT)
+		schedule_delayed_work(&dp->hpd_work, 0);
+
+	if (status & ZYNQMP_DP_TX_INTR_HPD_IRQ) {
+		int ret;
+		u8 status[DP_LINK_STATUS_SIZE + 2];
+
+		ret = drm_dp_dpcd_read(&dp->aux, DP_SINK_COUNT, status,
+				       DP_LINK_STATUS_SIZE + 2);
+		if (ret < 0)
+			goto handled;
+
+		if (status[4] & DP_LINK_STATUS_UPDATED ||
+		    !drm_dp_clock_recovery_ok(&status[2], dp->mode.lane_cnt) ||
+		    !drm_dp_channel_eq_ok(&status[2], dp->mode.lane_cnt)) {
+			zynqmp_dp_train_loop(dp);
+		}
+	}
+
+handled:
+	return IRQ_HANDLED;
+}
+
+int zynqmp_dp_probe(struct platform_device *pdev)
+{
+	struct zynqmp_dpsub *dpsub;
+	struct zynqmp_dp *dp;
+	struct resource *res;
+	unsigned int i;
+	int irq, ret;
+
+	dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	dp->dpms = DRM_MODE_DPMS_OFF;
+	dp->status = connector_status_disconnected;
+	dp->dev = &pdev->dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dp");
+	dp->iomem = devm_ioremap_resource(dp->dev, res);
+	if (IS_ERR(dp->iomem))
+		return PTR_ERR(dp->iomem);
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_PHY_POWER_DOWN,
+			ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL);
+	zynqmp_dp_set(dp->iomem, ZYNQMP_DP_TX_PHY_CONFIG,
+		      ZYNQMP_DP_TX_PHY_CONFIG_ALL_RESET);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_FORCE_SCRAMBLER_RESET, 1);
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 0);
+
+	dp->num_lanes = 2;
+	for (i = 0; i < ZYNQMP_DP_MAX_LANES; i++) {
+		char phy_name[16];
+
+		snprintf(phy_name, sizeof(phy_name), "dp-phy%d", i);
+		dp->phy[i] = devm_phy_get(dp->dev, phy_name);
+		if (IS_ERR(dp->phy[i])) {
+			/* 2nd lane is optional */
+			if (i == 0 || PTR_ERR(dp->phy[i]) != -ENODEV) {
+				dev_err(dp->dev, "failed to get phy lane\n");
+				ret = PTR_ERR(dp->phy[i]);
+				dp->phy[i] = NULL;
+				return ret;
+			}
+			dp->phy[i] = NULL;
+			dp->num_lanes = 1;
+		}
+	}
+
+	ret = zynqmp_dp_init_phy(dp);
+	if (ret)
+		goto error_phy;
+
+	dp->aux.name = "ZynqMP DP AUX";
+	dp->aux.dev = dp->dev;
+	dp->aux.transfer = zynqmp_dp_aux_transfer;
+	ret = drm_dp_aux_register(&dp->aux);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to initialize DP aux\n");
+		goto error;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto error;
+	}
+
+	ret = devm_request_threaded_irq(dp->dev, irq, NULL,
+					zynqmp_dp_irq_handler, IRQF_ONESHOT,
+					dev_name(dp->dev), dp);
+	if (ret < 0)
+		goto error;
+	dp->irq = irq;
+
+	dpsub = platform_get_drvdata(pdev);
+	dpsub->dp = dp;
+	dp->dpsub = dpsub;
+
+	return 0;
+
+error:
+	drm_dp_aux_unregister(&dp->aux);
+error_phy:
+	zynqmp_dp_exit_phy(dp);
+	return ret;
+}
+
+int zynqmp_dp_remove(struct platform_device *pdev)
+{
+	struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev);
+	struct zynqmp_dp *dp = dpsub->dp;
+
+	zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 0);
+	drm_dp_aux_unregister(&dp->aux);
+	zynqmp_dp_exit_phy(dp);
+	dpsub->dp = NULL;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.h b/drivers/gpu/drm/xlnx/zynqmp_dp.h
new file mode 100644
index 0000000..e5fcb66
--- /dev/null
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.h
@@ -0,0 +1,29 @@ 
+/*
+ * ZynqMP DisplayPort Driver
+ *
+ *  Copyright (C) 2017 - 2018 Xilinx, Inc.
+ *
+ *  Author: Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ZYNQMP_DP_H_
+#define _ZYNQMP_DP_H_
+
+struct zynqmp_dp;
+struct drm_display_mode;
+
+const int zynqmp_dp_set_color(struct zynqmp_dp *dp, const char *color);
+void zynqmp_dp_enable_vblank(struct zynqmp_dp *dp);
+void zynqmp_dp_disable_vblank(struct zynqmp_dp *dp);
+void zynqmp_dp_encoder_mode_set_stream(struct zynqmp_dp *dp,
+				       struct drm_display_mode *mode);
+
+int zynqmp_dp_bind(struct device *dev, struct device *master, void *data);
+void zynqmp_dp_unbind(struct device *dev, struct device *master, void *data);
+
+int zynqmp_dp_probe(struct platform_device *pdev);
+int zynqmp_dp_remove(struct platform_device *pdev);
+
+#endif /* _ZYNQMP_DP_H_ */