diff mbox

[7/7] dt-bindings: display: msm/dsi: Add updates for SDM845

Message ID 20180117093448.4102-8-architt@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Archit Taneja Jan. 17, 2018, 9:34 a.m. UTC 
SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This
revision has another clock input at the block boundary called the byte
interface clock. Specify this new clock in the binding.

A 10nm DSI PHY is used along with the controller. Add a compatible
string for it and specify its base address/regulator supply needs.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Rob Herring Jan. 29, 2018, 5:16 p.m. UTC | #1 
On Wed, Jan 17, 2018 at 03:04:48PM +0530, Archit Taneja wrote:
> SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This
> revision has another clock input at the block boundary called the byte
> interface clock. Specify this new clock in the binding.
> 
> A 10nm DSI PHY is used along with the controller. Add a compatible
> string for it and specify its base address/regulator supply needs.
> 
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Archit Taneja <architt@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 26a1796b7145..518e9cdf0d4b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -20,6 +20,8 @@  Required properties:
   * "core"
   For DSIv2, we need an additional clock:
    * "src"
+  For DSI6G v2.0 onwards, we need also need the clock:
+   * "byte_intf"
 - assigned-clocks: Parents of "byte" and "pixel" for the given platform.
 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
   by a DSI PHY block. See [1] for details on clock bindings.
@@ -87,6 +89,7 @@  Required properties:
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
   * "qcom,dsi-phy-14nm"
+  * "qcom,dsi-phy-10nm"
 - reg: Physical base address and length of the registers of PLL, PHY. Some
   revisions require the PHY regulator base address, whereas others require the
   PHY lane base address. See below for each PHY revision.
@@ -95,7 +98,7 @@  Required properties:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
-  For DSI 14nm PHY:
+  For DSI 14nm and 10nm PHYs:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_lane"
@@ -112,6 +115,8 @@  Required properties:
 - vcca-supply: phandle to vcca regulator device node
   For 14nm PHY:
 - vcca-supply: phandle to vcca regulator device node
+  For 10nm PHY:
+- vdds-supply: phandle to vdds regulator device node
 
 Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY