diff mbox

drm/i915: Restore HDCP DRM_INFO when with no downstream

Message ID 20180122175516.235313-1-seanpaul@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sean Paul Jan. 22, 2018, 5:55 p.m. UTC
The commit below returned earlier than before, but failed to move the
info message when authenticating without downstream devices. This patch
restores the message on authentication success.

Fixes: 87eb3ec818fa ("drm/i915: II stage HDCP auth for repeater only")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/i915/intel_hdcp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Daniel Vetter Jan. 30, 2018, 8:35 a.m. UTC | #1
On Mon, Jan 22, 2018 at 12:55:00PM -0500, Sean Paul wrote:
> The commit below returned earlier than before, but failed to move the
> info message when authenticating without downstream devices. This patch
> restores the message on authentication success.
> 
> Fixes: 87eb3ec818fa ("drm/i915: II stage HDCP auth for repeater only")
> Cc: Ramalingam C <ramalingam.c@intel.com>
> Cc: Sean Paul <seanpaul@chromium.org>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Cc: intel-gfx@lists.freedesktop.org
> Signed-off-by: Sean Paul <seanpaul@chromium.org>

DRM_INFO is rather loud (it shows up in dmesg by default), imo better to
bikeshed this to DRM_DEBUG_KMS or similar while at it. Of course would
need to be done for the entire file.

Either way (i.e. if you ignore this, do it in a separate patch, or
combined):

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>


> ---
>  drivers/gpu/drm/i915/intel_hdcp.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
> index db9527173a1e..dd7dffd405d5 100644
> --- a/drivers/gpu/drm/i915/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/intel_hdcp.c
> @@ -168,10 +168,8 @@ int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port,
>  
>  	/* If there are no downstream devices, we're all done. */
>  	num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
> -	if (num_downstream == 0) {
> -		DRM_INFO("HDCP is enabled (no downstream devices)\n");
> +	if (num_downstream == 0)
>  		return 0;
> -	}
>  
>  	ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL);
>  	if (!ksv_fifo)
> @@ -502,6 +500,7 @@ static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
>  	if (repeater_present)
>  		return intel_hdcp_auth_downstream(intel_dig_port, shim);
>  
> +	DRM_INFO("HDCP is enabled (no downstream devices)\n");
>  	return 0;
>  }
>  
> -- 
> 2.16.0.rc1.238.g530d649a79-goog
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Ramalingam C Jan. 30, 2018, 9:24 a.m. UTC | #2
On Monday 22 January 2018 11:25 PM, Sean Paul wrote:
> The commit below returned earlier than before, but failed to move the
> info message when authenticating without downstream devices. This patch
> restores the message on authentication success.
>
> Fixes: 87eb3ec818fa ("drm/i915: II stage HDCP auth for repeater only")
> Cc: Ramalingam C <ramalingam.c@intel.com>
> Cc: Sean Paul <seanpaul@chromium.org>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Cc: intel-gfx@lists.freedesktop.org
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
>   drivers/gpu/drm/i915/intel_hdcp.c | 5 ++---
>   1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
> index db9527173a1e..dd7dffd405d5 100644
> --- a/drivers/gpu/drm/i915/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/intel_hdcp.c
> @@ -168,10 +168,8 @@ int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port,
>   
>   	/* If there are no downstream devices, we're all done. */
>   	num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
> -	if (num_downstream == 0) {
> -		DRM_INFO("HDCP is enabled (no downstream devices)\n");
> +	if (num_downstream == 0)
>   		return 0;
> -	}
>   
>   	ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL);
>   	if (!ksv_fifo)
> @@ -502,6 +500,7 @@ static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
>   	if (repeater_present)
>   		return intel_hdcp_auth_downstream(intel_dig_port, shim);
>   
> +	DRM_INFO("HDCP is enabled (no downstream devices)\n");
Movement of the message make sense.

This log is for HDCP enabled on receiver. Even repeater might be with no 
downstream devices.
So msg such as "HDCP enabled on Receiver" would be more informative.

--Ram
>   	return 0;
>   }
>
Sean Paul Jan. 30, 2018, 2:23 p.m. UTC | #3
On Tue, Jan 30, 2018 at 09:35:34AM +0100, Daniel Vetter wrote:
> On Mon, Jan 22, 2018 at 12:55:00PM -0500, Sean Paul wrote:
> > The commit below returned earlier than before, but failed to move the
> > info message when authenticating without downstream devices. This patch
> > restores the message on authentication success.
> > 
> > Fixes: 87eb3ec818fa ("drm/i915: II stage HDCP auth for repeater only")
> > Cc: Ramalingam C <ramalingam.c@intel.com>
> > Cc: Sean Paul <seanpaul@chromium.org>
> > Cc: Jani Nikula <jani.nikula@linux.intel.com>
> > Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > Cc: intel-gfx@lists.freedesktop.org
> > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> 
> DRM_INFO is rather loud (it shows up in dmesg by default), imo better to
> bikeshed this to DRM_DEBUG_KMS or similar while at it. Of course would
> need to be done for the entire file.
> 

Yeah, I figured I would get this feedback when I chose INFO :-). So in my
defense, HDCP is enabled/disabled quite infrequently and very likely never
in most distros. Further, it's really nice to know whether something went
sideways while HDCP was enabled, or perhaps corresponding to enable/disable.

All said, if this is distruptive upstream, we can carry a s/DEBUG_KMS/INFO/
patch downstream.

> Either way (i.e. if you ignore this, do it in a separate patch, or
> combined):
> 
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

As always, thank you for your review!

Sean

> 
> 
> > ---
> >  drivers/gpu/drm/i915/intel_hdcp.c | 5 ++---
> >  1 file changed, 2 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
> > index db9527173a1e..dd7dffd405d5 100644
> > --- a/drivers/gpu/drm/i915/intel_hdcp.c
> > +++ b/drivers/gpu/drm/i915/intel_hdcp.c
> > @@ -168,10 +168,8 @@ int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port,
> >  
> >  	/* If there are no downstream devices, we're all done. */
> >  	num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
> > -	if (num_downstream == 0) {
> > -		DRM_INFO("HDCP is enabled (no downstream devices)\n");
> > +	if (num_downstream == 0)
> >  		return 0;
> > -	}
> >  
> >  	ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL);
> >  	if (!ksv_fifo)
> > @@ -502,6 +500,7 @@ static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
> >  	if (repeater_present)
> >  		return intel_hdcp_auth_downstream(intel_dig_port, shim);
> >  
> > +	DRM_INFO("HDCP is enabled (no downstream devices)\n");
> >  	return 0;
> >  }
> >  
> > -- 
> > 2.16.0.rc1.238.g530d649a79-goog
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
index db9527173a1e..dd7dffd405d5 100644
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -168,10 +168,8 @@  int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port,
 
 	/* If there are no downstream devices, we're all done. */
 	num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
-	if (num_downstream == 0) {
-		DRM_INFO("HDCP is enabled (no downstream devices)\n");
+	if (num_downstream == 0)
 		return 0;
-	}
 
 	ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL);
 	if (!ksv_fifo)
@@ -502,6 +500,7 @@  static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
 	if (repeater_present)
 		return intel_hdcp_auth_downstream(intel_dig_port, shim);
 
+	DRM_INFO("HDCP is enabled (no downstream devices)\n");
 	return 0;
 }