@@ -1304,6 +1304,7 @@ enum i915_power_well_id {
SKL_DISP_PW_DDI_B,
SKL_DISP_PW_DDI_C,
SKL_DISP_PW_DDI_D,
+ CNL_DISP_PW_DDI_F = 6,
GLK_DISP_PW_AUX_A = 8,
GLK_DISP_PW_AUX_B,
@@ -8945,6 +8946,7 @@ enum skl_power_gate {
#define SFUSE_STRAP_RAW_FREQUENCY (1<<8)
#define SFUSE_STRAP_DISPLAY_DISABLED (1<<7)
#define SFUSE_STRAP_CRT_DISABLED (1<<6)
+#define SFUSE_STRAP_DDIF_DETECTED (1<<3)
#define SFUSE_STRAP_DDIB_DETECTED (1<<2)
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
@@ -2946,6 +2946,10 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
intel_dig_port->ddi_io_power_domain =
POWER_DOMAIN_PORT_DDI_E_IO;
break;
+ case PORT_F:
+ intel_dig_port->ddi_io_power_domain =
+ POWER_DOMAIN_PORT_DDI_F_IO;
+ break;
default:
MISSING_CASE(port);
}
@@ -5647,6 +5647,8 @@ enum intel_display_power_domain intel_port_to_power_domain(enum port port)
return POWER_DOMAIN_PORT_DDI_D_LANES;
case PORT_E:
return POWER_DOMAIN_PORT_DDI_E_LANES;
+ case PORT_F:
+ return POWER_DOMAIN_PORT_DDI_F_LANES;
default:
MISSING_CASE(port);
return POWER_DOMAIN_PORT_OTHER;
@@ -13619,7 +13621,7 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
if (found || IS_GEN9_BC(dev_priv))
intel_ddi_init(dev_priv, PORT_A);
- /* DDI B, C and D detection is indicated by the SFUSE_STRAP
+ /* DDI B, C, D, and F detection is indicated by the SFUSE_STRAP
* register */
found = I915_READ(SFUSE_STRAP);
@@ -13629,6 +13631,8 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
intel_ddi_init(dev_priv, PORT_C);
if (found & SFUSE_STRAP_DDID_DETECTED)
intel_ddi_init(dev_priv, PORT_D);
+ if (found & SFUSE_STRAP_DDIF_DETECTED)
+ intel_ddi_init(dev_priv, PORT_F);
/*
* On SKL we don't have a way to detect DDI-E so we rely on VBT.
*/
@@ -157,11 +157,13 @@ enum intel_display_power_domain {
POWER_DOMAIN_PORT_DDI_C_LANES,
POWER_DOMAIN_PORT_DDI_D_LANES,
POWER_DOMAIN_PORT_DDI_E_LANES,
+ POWER_DOMAIN_PORT_DDI_F_LANES,
POWER_DOMAIN_PORT_DDI_A_IO,
POWER_DOMAIN_PORT_DDI_B_IO,
POWER_DOMAIN_PORT_DDI_C_IO,
POWER_DOMAIN_PORT_DDI_D_IO,
POWER_DOMAIN_PORT_DDI_E_IO,
+ POWER_DOMAIN_PORT_DDI_F_IO,
POWER_DOMAIN_PORT_DSI,
POWER_DOMAIN_PORT_CRT,
POWER_DOMAIN_PORT_OTHER,
@@ -94,6 +94,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
return "PORT_DDI_D_LANES";
case POWER_DOMAIN_PORT_DDI_E_LANES:
return "PORT_DDI_E_LANES";
+ case POWER_DOMAIN_PORT_DDI_F_LANES:
+ return "PORT_DDI_F_LANES";
case POWER_DOMAIN_PORT_DDI_A_IO:
return "PORT_DDI_A_IO";
case POWER_DOMAIN_PORT_DDI_B_IO:
@@ -104,6 +106,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
return "PORT_DDI_D_IO";
case POWER_DOMAIN_PORT_DDI_E_IO:
return "PORT_DDI_E_IO";
+ case POWER_DOMAIN_PORT_DDI_F_IO:
+ return "PORT_DDI_F_IO";
case POWER_DOMAIN_PORT_DSI:
return "PORT_DSI";
case POWER_DOMAIN_PORT_CRT:
@@ -1860,6 +1864,9 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
#define CNL_DISPLAY_AUX_F_POWER_DOMAINS ( \
BIT_ULL(POWER_DOMAIN_AUX_F) | \
BIT_ULL(POWER_DOMAIN_INIT))
+#define CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_F_IO) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
#define CNL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
BIT_ULL(POWER_DOMAIN_GT_IRQ) | \
@@ -2411,6 +2418,12 @@ static struct i915_power_well cnl_power_wells[] = {
.id = SKL_DISP_PW_DDI_D,
},
{
+ .name = "DDI F IO power well",
+ .domains = CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = CNL_DISP_PW_DDI_F,
+ },
+ {
.name = "AUX F",
.domains = CNL_DISPLAY_AUX_F_POWER_DOMAINS,
.ops = &hsw_power_well_ops,
@@ -2533,13 +2546,13 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
set_power_wells(power_domains, cnl_power_wells);
/*
- * Aux IO is getting enabled for all ports
+ * DDI and Aux IO are getting enabled for all ports
* regardless the presence or use. So, in order to avoid
- * timeouts, lets remove it from the list
+ * timeouts, lets remove them from the list
* for the SKUs without port F.
*/
if (!IS_CNL_WITH_PORT_F(dev_priv))
- power_domains->power_well_count -= 1;
+ power_domains->power_well_count -= 2;
} else if (IS_BROXTON(dev_priv)) {
set_power_wells(power_domains, bxt_power_wells);
Now let's finish the Port-F support by adding the proper port F detection, irq and power well support. v2: Rebase v3: Use BIT_ULL v4: Cover missed case on ddi init. v5: Update commit message. v6: Rebase on top of display headers rework. v7: Squash power-well handling related to DDI F to this patch to avoid warns as pointed out by DK. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> --- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_ddi.c | 4 ++++ drivers/gpu/drm/i915/intel_display.c | 6 +++++- drivers/gpu/drm/i915/intel_display.h | 2 ++ drivers/gpu/drm/i915/intel_runtime_pm.c | 19 ++++++++++++++++--- 5 files changed, 29 insertions(+), 4 deletions(-)