@@ -16,6 +16,12 @@ Optional properties:
- realtek,dmic-en
Boolean. true if dmic is used.
+- realtek,jack-detect-source
+ u32. Valid values:
+ 1: Use JD1_1 pin for jack-dectect
+ 2: Use JD1_2 pin for jack-dectect
+ 3: Use JD2 pin for jack-dectect
+
Pins on the device (for linking into audio routes) for RT5651:
* DMIC L1
@@ -11,6 +11,10 @@
#ifndef __LINUX_SND_RT5651_H
#define __LINUX_SND_RT5651_H
+/*
+ * Note the MUST match the values from the DT binding:
+ * Documentation/devicetree/bindings/sound/rt5651.txt
+ */
enum rt5651_jd_src {
RT5651_JD_NULL,
RT5651_JD1_1,
@@ -19,7 +19,6 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/acpi.h>
-#include <linux/dmi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -32,8 +31,6 @@
#include "rl6231.h"
#include "rt5651.h"
-#define RT5651_JD_MAP(quirk) ((quirk) & GENMASK(7, 0))
-
#define RT5651_DEVICE_ID_VALUE 0x6281
#define RT5651_PR_RANGE_BASE (0xff + 1)
@@ -41,8 +38,6 @@
#define RT5651_PR_BASE (RT5651_PR_RANGE_BASE + (0 * RT5651_PR_SPACING))
-static unsigned long rt5651_quirk;
-
static const struct regmap_range_cfg rt5651_ranges[] = {
{ .name = "PR", .range_min = RT5651_PR_BASE,
.range_max = RT5651_PR_BASE + 0xb4,
@@ -1599,6 +1594,11 @@ static int rt5651_set_jack(struct snd_soc_component *component,
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component);
int ret;
+ u32 val;
+
+ if (device_property_read_u32(component->dev,
+ "realtek,jack-detect-source", &val) == 0)
+ rt5651->jd_src = val;
if (!rt5651->irq)
return -EINVAL;
@@ -1824,24 +1824,6 @@ static const struct i2c_device_id rt5651_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, rt5651_i2c_id);
-static int rt5651_quirk_cb(const struct dmi_system_id *id)
-{
- rt5651_quirk = (unsigned long) id->driver_data;
- return 1;
-}
-
-static const struct dmi_system_id rt5651_quirk_table[] = {
- {
- .callback = rt5651_quirk_cb,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "KIANO"),
- DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"),
- },
- .driver_data = (unsigned long *) RT5651_JD1_1,
- },
- {}
-};
-
static int rt5651_jack_detect(struct snd_soc_component *component, int jack_insert)
{
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
@@ -1920,9 +1902,6 @@ static int rt5651_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt5651);
- dmi_check_system(rt5651_quirk_table);
- rt5651->jd_src = RT5651_JD_MAP(rt5651_quirk);
-
rt5651->regmap = devm_regmap_init_i2c(i2c, &rt5651_regmap);
if (IS_ERR(rt5651->regmap)) {
ret = PTR_ERR(rt5651->regmap);
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/device.h>
@@ -42,10 +43,21 @@ enum {
BYT_RT5651_IN3_MAP,
};
-#define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0))
-#define BYT_RT5651_DMIC_EN BIT(16)
-#define BYT_RT5651_MCLK_EN BIT(17)
-#define BYT_RT5651_MCLK_25MHZ BIT(18)
+enum {
+ BYT_RT5651_JD_NULL = (RT5651_JD_NULL << 4),
+ BYT_RT5651_JD1_1 = (RT5651_JD1_1 << 4),
+ BYT_RT5651_JD1_2 = (RT5651_JD1_2 << 4),
+ BYT_RT5651_JD2 = (RT5651_JD2 << 4),
+};
+
+#define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(3, 0))
+#define BYT_RT5651_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4)
+#define BYT_RT5651_DMIC_EN BIT(16)
+#define BYT_RT5651_MCLK_EN BIT(17)
+#define BYT_RT5651_MCLK_25MHZ BIT(18)
+
+/* jack-detect-source + terminating empty entry */
+#define MAX_NO_PROPS 2
struct byt_rt5651_private {
struct clk *mclk;
@@ -66,6 +78,9 @@ static void log_quirks(struct device *dev)
dev_info(dev, "quirk IN2_MAP enabled");
if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN3_MAP)
dev_info(dev, "quirk IN3_MAP enabled");
+ if (BYT_RT5651_JDSRC(byt_rt5651_quirk))
+ dev_info(dev, "quirk jack-detect src %ld\n",
+ BYT_RT5651_JDSRC(byt_rt5651_quirk));
if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN)
dev_info(dev, "quirk DMIC enabled");
if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
@@ -288,6 +303,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"),
},
.driver_data = (void *)(BYT_RT5651_MCLK_EN |
+ BYT_RT5651_JD1_1 |
BYT_RT5651_IN1_IN2_MAP),
},
{}
@@ -298,8 +314,9 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
struct snd_soc_card *card = runtime->card;
struct snd_soc_component *codec = runtime->codec_dai->component;
struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
+ struct property_entry props[MAX_NO_PROPS] = {};
const struct snd_soc_dapm_route *custom_map;
- int num_routes;
+ int num_routes, no_props = 0;
int ret;
card->dapm.idle_bias_off = true;
@@ -360,6 +377,13 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
dev_err(card->dev, "unable to set MCLK rate\n");
}
+ props[no_props++] = PROPERTY_ENTRY_U32("realtek,jack-detect-source",
+ BYT_RT5651_JDSRC(byt_rt5651_quirk));
+
+ ret = device_add_properties(codec->dev, props);
+ if (ret)
+ return ret;
+
ret = snd_soc_card_jack_new(runtime->card, "Headset",
SND_JACK_HEADSET, &priv->jack,
bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins));
Configure the jack-detect source through a device-property which can be set by code outside of the codec driver. Rather then putting platform specific DMI quirks inside the generic codec driver. And move the jack-detect-source quirk for the KIANO SlimNote 14.2, which was present inside the codec driver to the machine driver, where we can bundle it together with the other quirks already present for this laptop. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Documentation/devicetree/bindings/sound/rt5651.txt | 6 ++++ include/sound/rt5651.h | 4 +++ sound/soc/codecs/rt5651.c | 31 ++++---------------- sound/soc/intel/boards/bytcr_rt5651.c | 34 ++++++++++++++++++---- 4 files changed, 44 insertions(+), 31 deletions(-)