diff mbox

[1/1] xfs: update the output of AG metadata corruption checking and repair tests

Message ID 1519633573-7807-1-git-send-email-shan.hai@oracle.com (mailing list archive)
State New, archived
Headers show

Commit Message

Shan Hai Feb. 26, 2018, 8:26 a.m. UTC
The xfs/087 and xfs/097 fail after the introduction of the
"xfs: set up per-AG free space reservations" in the kernel code,
because the filesystem is shutdown by the per-AG metadata reservation
code on the -EFSCORRUPTED error, the above mentioned tests initiate
the -EFSCORRUPTED error intentionally but its results checking part is
out of date and cause the failure of the tests.

Update the output of the tests to match with the current kernel behavior.

Signed-off-by: Shan Hai <shan.hai@oracle.com>
---
 tests/xfs/087     | 32 ++++++++++++++++----------------
 tests/xfs/087.out | 26 ++++++++++++++------------
 tests/xfs/097     | 32 ++++++++++++++++----------------
 tests/xfs/097.out | 26 ++++++++++++++------------
 4 files changed, 60 insertions(+), 56 deletions(-)

Comments

Darrick J. Wong Feb. 26, 2018, 10:52 p.m. UTC | #1
On Mon, Feb 26, 2018 at 04:26:13PM +0800, Shan Hai wrote:
> The xfs/087 and xfs/097 fail after the introduction of the
> "xfs: set up per-AG free space reservations" in the kernel code,
> because the filesystem is shutdown by the per-AG metadata reservation
> code on the -EFSCORRUPTED error, the above mentioned tests initiate
> the -EFSCORRUPTED error intentionally but its results checking part is
> out of date and cause the failure of the tests.

Hmm, I think this test (and the other blocktrash fuzzers) need more
surgery than this.  Those tests do:

1. format
2. blocktrash
3. mount
4. modify fs
5. unmount

However, in light of Eryu's changes to _scratch_mount to _fail the test
if the mount fails, that needs to become...

if _scratch_mount >> $seqres.full 2>&1; then
	# modify fs
	_scratch_umount
fi

Note that this also solves the 'structure needs cleaning' lines in the
dirty output.  Since there are a lot of blocktrash fuzzers I'll take
care of fixing them all for you.  It's been too long since I ran them
anyway.

> Update the output of the tests to match with the current kernel behavior.
> 
> Signed-off-by: Shan Hai <shan.hai@oracle.com>
> ---
>  tests/xfs/087     | 32 ++++++++++++++++----------------
>  tests/xfs/087.out | 26 ++++++++++++++------------
>  tests/xfs/097     | 32 ++++++++++++++++----------------
>  tests/xfs/097.out | 26 ++++++++++++++------------
>  4 files changed, 60 insertions(+), 56 deletions(-)
> 
> diff --git a/tests/xfs/087 b/tests/xfs/087
> index 58ba958..d557c12 100755
> --- a/tests/xfs/087
> +++ b/tests/xfs/087
> @@ -58,14 +58,14 @@ rm -f $seqres.full
>  TESTDIR="${SCRATCH_MNT}/scratchdir"
>  TESTFILE="${TESTDIR}/testfile"
>  
> -echo "+ create scratch fs"
> +echo "create scratch fs"

Why is it necessary to change this part of the golden output?

--D

>  _scratch_mkfs_xfs > /dev/null
>  
> -echo "+ mount fs image"
> +echo "mount fs image"
>  _scratch_mount
>  blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
>  
> -echo "+ make some files"
> +echo "make some files"
>  mkdir -p "${TESTDIR}"
>  for x in `seq 1 1024`; do
>  	touch "${SCRATCH_MNT}/junk.${x}"
> @@ -80,45 +80,45 @@ for x in `seq 2 64`; do
>  done
>  inode="$(stat -c '%i' "${TESTFILE}.1")"
>  agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
> -umount "${SCRATCH_MNT}"
> +_scratch_unmount
>  
> -echo "+ check fs"
> +echo "check fs"
>  _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>  
> -echo "+ corrupt image"
> +echo "corrupt image"
>  for ag in $(seq 1 $((agcount - 1))) 0; do
>  	_scratch_xfs_db -x -c "agi ${ag}" -c "agi ${ag}" -c "stack" -c "blocktrash -x 32 -o +64 -y 4096 -z ${FUZZ_ARGS}" >> $seqres.full 2>&1
>  done
>  
> -echo "+ mount image"
> -_scratch_mount
> +echo "mount image"
> +_try_scratch_mount 2>&1 | _filter_error_mount
>  
> -echo "+ modify files"
> +echo "modify files"
>  broken=0
>  for x in `seq 65 70`; do
>  	touch "${TESTFILE}.${x}" 2> /dev/null || broken=1
>  done
>  echo "broken: ${broken}"
> -umount "${SCRATCH_MNT}"
> +_scratch_unmount 2>&1 | _filter_scratch
>  
> -echo "+ repair fs"
> +echo "repair fs"
>  _scratch_xfs_repair >> $seqres.full 2>&1
>  
> -echo "+ mount image (2)"
> +echo "mount image (2)"
>  _scratch_mount
>  
> -echo "+ chattr -R -i"
> +echo "chattr -R -i"
>  $CHATTR_PROG -R -f -i "${SCRATCH_MNT}/"
>  
> -echo "+ modify files (2)"
> +echo "modify files (2)"
>  broken=0
>  for x in `seq 65 70`; do
>  	touch "${TESTFILE}.${x}" || broken=1
>  done
>  echo "broken: ${broken}"
> -umount "${SCRATCH_MNT}"
> +_scratch_unmount
>  
> -echo "+ check fs (2)"
> +echo "check fs (2)"
>  _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>  
>  status=0
> diff --git a/tests/xfs/087.out b/tests/xfs/087.out
> index 1f6e0b5..c4aee5a 100644
> --- a/tests/xfs/087.out
> +++ b/tests/xfs/087.out
> @@ -1,15 +1,17 @@
>  QA output created by 087
> -+ create scratch fs
> -+ mount fs image
> -+ make some files
> -+ check fs
> -+ corrupt image
> -+ mount image
> -+ modify files
> +create scratch fs
> +mount fs image
> +make some files
> +check fs
> +corrupt image
> +mount image
> +mount: Structure needs cleaning
> +modify files
>  broken: 1
> -+ repair fs
> -+ mount image (2)
> -+ chattr -R -i
> -+ modify files (2)
> +umount: SCRATCH_DEV: not mounted.
> +repair fs
> +mount image (2)
> +chattr -R -i
> +modify files (2)
>  broken: 0
> -+ check fs (2)
> +check fs (2)
> diff --git a/tests/xfs/097 b/tests/xfs/097
> index 303ad04..4d6fda5 100755
> --- a/tests/xfs/097
> +++ b/tests/xfs/097
> @@ -60,15 +60,15 @@ rm -f $seqres.full
>  TESTDIR="${SCRATCH_MNT}/scratchdir"
>  TESTFILE="${TESTDIR}/testfile"
>  
> -echo "+ create scratch fs"
> +echo "create scratch fs"
>  _scratch_mkfs_xfs > /dev/null
>  
> -echo "+ mount fs image"
> +echo "mount fs image"
>  _scratch_mount
>  xfs_info "${SCRATCH_MNT}" | grep -q "finobt=1" || _notrun "finobt not enabled"
>  blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
>  
> -echo "+ make some files"
> +echo "make some files"
>  mkdir -p "${TESTDIR}"
>  for x in `seq 1 1024`; do
>  	touch "${SCRATCH_MNT}/junk.${x}"
> @@ -83,45 +83,45 @@ for x in `seq 2 64`; do
>  done
>  inode="$(stat -c '%i' "${TESTFILE}.1")"
>  agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
> -umount "${SCRATCH_MNT}"
> +_scratch_unmount 2>&1 | _filter_scratch
>  
> -echo "+ check fs"
> +echo "check fs"
>  _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>  
> -echo "+ corrupt image"
> +echo "corrupt image"
>  for ag in $(seq 1 $((agcount - 1))) 0; do
>  	_scratch_xfs_db -x -c "agi ${ag}" -c "agi ${ag}" -c "addr free_root" -c "stack" -c "blocktrash -x 32 -y $((blksz * 8)) -z ${FUZZ_ARGS}" >> $seqres.full 2>&1
>  done
>  
> -echo "+ mount image"
> -_scratch_mount
> +echo "mount image"
> +_try_scratch_mount 2>&1 | _filter_error_mount
>  
> -echo "+ modify files"
> +echo "modify files"
>  broken=0
>  for x in `seq 65 70`; do
>  	touch "${TESTFILE}.${x}" 2> /dev/null || broken=1
>  done
>  echo "broken: ${broken}"
> -umount "${SCRATCH_MNT}"
> +_scratch_unmount 2>&1 | _filter_scratch
>  
> -echo "+ repair fs"
> +echo "repair fs"
>  _scratch_xfs_repair >> $seqres.full 2>&1
>  
> -echo "+ mount image (2)"
> +echo "mount image (2)"
>  _scratch_mount
>  
> -echo "+ chattr -R -i"
> +echo "chattr -R -i"
>  $CHATTR_PROG -R -f -i "${SCRATCH_MNT}/"
>  
> -echo "+ modify files (2)"
> +echo "modify files (2)"
>  broken=0
>  for x in `seq 65 70`; do
>  	touch "${TESTFILE}.${x}" || broken=1
>  done
>  echo "broken: ${broken}"
> -umount "${SCRATCH_MNT}"
> +_scratch_unmount
>  
> -echo "+ check fs (2)"
> +echo "check fs (2)"
>  _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>  
>  status=0
> diff --git a/tests/xfs/097.out b/tests/xfs/097.out
> index 84f6a70..0eb2085 100644
> --- a/tests/xfs/097.out
> +++ b/tests/xfs/097.out
> @@ -1,15 +1,17 @@
>  QA output created by 097
> -+ create scratch fs
> -+ mount fs image
> -+ make some files
> -+ check fs
> -+ corrupt image
> -+ mount image
> -+ modify files
> +create scratch fs
> +mount fs image
> +make some files
> +check fs
> +corrupt image
> +mount image
> +mount: Structure needs cleaning
> +modify files
>  broken: 1
> -+ repair fs
> -+ mount image (2)
> -+ chattr -R -i
> -+ modify files (2)
> +umount: SCRATCH_DEV: not mounted.
> +repair fs
> +mount image (2)
> +chattr -R -i
> +modify files (2)
>  broken: 0
> -+ check fs (2)
> +check fs (2)
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Shan Hai Feb. 27, 2018, 1:17 a.m. UTC | #2
On 2018年02月27日 06:52, Darrick J. Wong wrote:
> On Mon, Feb 26, 2018 at 04:26:13PM +0800, Shan Hai wrote:
>> The xfs/087 and xfs/097 fail after the introduction of the
>> "xfs: set up per-AG free space reservations" in the kernel code,
>> because the filesystem is shutdown by the per-AG metadata reservation
>> code on the -EFSCORRUPTED error, the above mentioned tests initiate
>> the -EFSCORRUPTED error intentionally but its results checking part is
>> out of date and cause the failure of the tests.
> Hmm, I think this test (and the other blocktrash fuzzers) need more
> surgery than this.  Those tests do:
>
> 1. format
> 2. blocktrash
> 3. mount
> 4. modify fs
> 5. unmount
>
> However, in light of Eryu's changes to _scratch_mount to _fail the test
> if the mount fails, that needs to become...
>
> if _scratch_mount >> $seqres.full 2>&1; then
> 	# modify fs
> 	_scratch_umount
> fi

Agreed.

> Note that this also solves the 'structure needs cleaning' lines in the
> dirty output.  Since there are a lot of blocktrash fuzzers I'll take
> care of fixing them all for you.  It's been too long since I ran them
> anyway.
>

Thanks for your kind help.
>> Update the output of the tests to match with the current kernel behavior.
>>
>> Signed-off-by: Shan Hai <shan.hai@oracle.com>
>> ---
>>   tests/xfs/087     | 32 ++++++++++++++++----------------
>>   tests/xfs/087.out | 26 ++++++++++++++------------
>>   tests/xfs/097     | 32 ++++++++++++++++----------------
>>   tests/xfs/097.out | 26 ++++++++++++++------------
>>   4 files changed, 60 insertions(+), 56 deletions(-)
>>
>> diff --git a/tests/xfs/087 b/tests/xfs/087
>> index 58ba958..d557c12 100755
>> --- a/tests/xfs/087
>> +++ b/tests/xfs/087
>> @@ -58,14 +58,14 @@ rm -f $seqres.full
>>   TESTDIR="${SCRATCH_MNT}/scratchdir"
>>   TESTFILE="${TESTDIR}/testfile"
>>   
>> -echo "+ create scratch fs"
>> +echo "create scratch fs"
> Why is it necessary to change this part of the golden output?

In order to make the format consistent in the x.out file, since the 
output of the
'_try_scratch_mount 2>&1 | _filter_error_mount' lacks leading '+'.


Thanks
Shan Hai
>
> --D
>
>>   _scratch_mkfs_xfs > /dev/null
>>   
>> -echo "+ mount fs image"
>> +echo "mount fs image"
>>   _scratch_mount
>>   blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
>>   
>> -echo "+ make some files"
>> +echo "make some files"
>>   mkdir -p "${TESTDIR}"
>>   for x in `seq 1 1024`; do
>>   	touch "${SCRATCH_MNT}/junk.${x}"
>> @@ -80,45 +80,45 @@ for x in `seq 2 64`; do
>>   done
>>   inode="$(stat -c '%i' "${TESTFILE}.1")"
>>   agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
>> -umount "${SCRATCH_MNT}"
>> +_scratch_unmount
>>   
>> -echo "+ check fs"
>> +echo "check fs"
>>   _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>>   
>> -echo "+ corrupt image"
>> +echo "corrupt image"
>>   for ag in $(seq 1 $((agcount - 1))) 0; do
>>   	_scratch_xfs_db -x -c "agi ${ag}" -c "agi ${ag}" -c "stack" -c "blocktrash -x 32 -o +64 -y 4096 -z ${FUZZ_ARGS}" >> $seqres.full 2>&1
>>   done
>>   
>> -echo "+ mount image"
>> -_scratch_mount
>> +echo "mount image"
>> +_try_scratch_mount 2>&1 | _filter_error_mount
>>   
>> -echo "+ modify files"
>> +echo "modify files"
>>   broken=0
>>   for x in `seq 65 70`; do
>>   	touch "${TESTFILE}.${x}" 2> /dev/null || broken=1
>>   done
>>   echo "broken: ${broken}"
>> -umount "${SCRATCH_MNT}"
>> +_scratch_unmount 2>&1 | _filter_scratch
>>   
>> -echo "+ repair fs"
>> +echo "repair fs"
>>   _scratch_xfs_repair >> $seqres.full 2>&1
>>   
>> -echo "+ mount image (2)"
>> +echo "mount image (2)"
>>   _scratch_mount
>>   
>> -echo "+ chattr -R -i"
>> +echo "chattr -R -i"
>>   $CHATTR_PROG -R -f -i "${SCRATCH_MNT}/"
>>   
>> -echo "+ modify files (2)"
>> +echo "modify files (2)"
>>   broken=0
>>   for x in `seq 65 70`; do
>>   	touch "${TESTFILE}.${x}" || broken=1
>>   done
>>   echo "broken: ${broken}"
>> -umount "${SCRATCH_MNT}"
>> +_scratch_unmount
>>   
>> -echo "+ check fs (2)"
>> +echo "check fs (2)"
>>   _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>>   
>>   status=0
>> diff --git a/tests/xfs/087.out b/tests/xfs/087.out
>> index 1f6e0b5..c4aee5a 100644
>> --- a/tests/xfs/087.out
>> +++ b/tests/xfs/087.out
>> @@ -1,15 +1,17 @@
>>   QA output created by 087
>> -+ create scratch fs
>> -+ mount fs image
>> -+ make some files
>> -+ check fs
>> -+ corrupt image
>> -+ mount image
>> -+ modify files
>> +create scratch fs
>> +mount fs image
>> +make some files
>> +check fs
>> +corrupt image
>> +mount image
>> +mount: Structure needs cleaning
>> +modify files
>>   broken: 1
>> -+ repair fs
>> -+ mount image (2)
>> -+ chattr -R -i
>> -+ modify files (2)
>> +umount: SCRATCH_DEV: not mounted.
>> +repair fs
>> +mount image (2)
>> +chattr -R -i
>> +modify files (2)
>>   broken: 0
>> -+ check fs (2)
>> +check fs (2)
>> diff --git a/tests/xfs/097 b/tests/xfs/097
>> index 303ad04..4d6fda5 100755
>> --- a/tests/xfs/097
>> +++ b/tests/xfs/097
>> @@ -60,15 +60,15 @@ rm -f $seqres.full
>>   TESTDIR="${SCRATCH_MNT}/scratchdir"
>>   TESTFILE="${TESTDIR}/testfile"
>>   
>> -echo "+ create scratch fs"
>> +echo "create scratch fs"
>>   _scratch_mkfs_xfs > /dev/null
>>   
>> -echo "+ mount fs image"
>> +echo "mount fs image"
>>   _scratch_mount
>>   xfs_info "${SCRATCH_MNT}" | grep -q "finobt=1" || _notrun "finobt not enabled"
>>   blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
>>   
>> -echo "+ make some files"
>> +echo "make some files"
>>   mkdir -p "${TESTDIR}"
>>   for x in `seq 1 1024`; do
>>   	touch "${SCRATCH_MNT}/junk.${x}"
>> @@ -83,45 +83,45 @@ for x in `seq 2 64`; do
>>   done
>>   inode="$(stat -c '%i' "${TESTFILE}.1")"
>>   agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
>> -umount "${SCRATCH_MNT}"
>> +_scratch_unmount 2>&1 | _filter_scratch
>>   
>> -echo "+ check fs"
>> +echo "check fs"
>>   _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>>   
>> -echo "+ corrupt image"
>> +echo "corrupt image"
>>   for ag in $(seq 1 $((agcount - 1))) 0; do
>>   	_scratch_xfs_db -x -c "agi ${ag}" -c "agi ${ag}" -c "addr free_root" -c "stack" -c "blocktrash -x 32 -y $((blksz * 8)) -z ${FUZZ_ARGS}" >> $seqres.full 2>&1
>>   done
>>   
>> -echo "+ mount image"
>> -_scratch_mount
>> +echo "mount image"
>> +_try_scratch_mount 2>&1 | _filter_error_mount
>>   
>> -echo "+ modify files"
>> +echo "modify files"
>>   broken=0
>>   for x in `seq 65 70`; do
>>   	touch "${TESTFILE}.${x}" 2> /dev/null || broken=1
>>   done
>>   echo "broken: ${broken}"
>> -umount "${SCRATCH_MNT}"
>> +_scratch_unmount 2>&1 | _filter_scratch
>>   
>> -echo "+ repair fs"
>> +echo "repair fs"
>>   _scratch_xfs_repair >> $seqres.full 2>&1
>>   
>> -echo "+ mount image (2)"
>> +echo "mount image (2)"
>>   _scratch_mount
>>   
>> -echo "+ chattr -R -i"
>> +echo "chattr -R -i"
>>   $CHATTR_PROG -R -f -i "${SCRATCH_MNT}/"
>>   
>> -echo "+ modify files (2)"
>> +echo "modify files (2)"
>>   broken=0
>>   for x in `seq 65 70`; do
>>   	touch "${TESTFILE}.${x}" || broken=1
>>   done
>>   echo "broken: ${broken}"
>> -umount "${SCRATCH_MNT}"
>> +_scratch_unmount
>>   
>> -echo "+ check fs (2)"
>> +echo "check fs (2)"
>>   _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
>>   
>>   status=0
>> diff --git a/tests/xfs/097.out b/tests/xfs/097.out
>> index 84f6a70..0eb2085 100644
>> --- a/tests/xfs/097.out
>> +++ b/tests/xfs/097.out
>> @@ -1,15 +1,17 @@
>>   QA output created by 097
>> -+ create scratch fs
>> -+ mount fs image
>> -+ make some files
>> -+ check fs
>> -+ corrupt image
>> -+ mount image
>> -+ modify files
>> +create scratch fs
>> +mount fs image
>> +make some files
>> +check fs
>> +corrupt image
>> +mount image
>> +mount: Structure needs cleaning
>> +modify files
>>   broken: 1
>> -+ repair fs
>> -+ mount image (2)
>> -+ chattr -R -i
>> -+ modify files (2)
>> +umount: SCRATCH_DEV: not mounted.
>> +repair fs
>> +mount image (2)
>> +chattr -R -i
>> +modify files (2)
>>   broken: 0
>> -+ check fs (2)
>> +check fs (2)
>> -- 
>> 2.7.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/tests/xfs/087 b/tests/xfs/087
index 58ba958..d557c12 100755
--- a/tests/xfs/087
+++ b/tests/xfs/087
@@ -58,14 +58,14 @@  rm -f $seqres.full
 TESTDIR="${SCRATCH_MNT}/scratchdir"
 TESTFILE="${TESTDIR}/testfile"
 
-echo "+ create scratch fs"
+echo "create scratch fs"
 _scratch_mkfs_xfs > /dev/null
 
-echo "+ mount fs image"
+echo "mount fs image"
 _scratch_mount
 blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
 
-echo "+ make some files"
+echo "make some files"
 mkdir -p "${TESTDIR}"
 for x in `seq 1 1024`; do
 	touch "${SCRATCH_MNT}/junk.${x}"
@@ -80,45 +80,45 @@  for x in `seq 2 64`; do
 done
 inode="$(stat -c '%i' "${TESTFILE}.1")"
 agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
-umount "${SCRATCH_MNT}"
+_scratch_unmount
 
-echo "+ check fs"
+echo "check fs"
 _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
 
-echo "+ corrupt image"
+echo "corrupt image"
 for ag in $(seq 1 $((agcount - 1))) 0; do
 	_scratch_xfs_db -x -c "agi ${ag}" -c "agi ${ag}" -c "stack" -c "blocktrash -x 32 -o +64 -y 4096 -z ${FUZZ_ARGS}" >> $seqres.full 2>&1
 done
 
-echo "+ mount image"
-_scratch_mount
+echo "mount image"
+_try_scratch_mount 2>&1 | _filter_error_mount
 
-echo "+ modify files"
+echo "modify files"
 broken=0
 for x in `seq 65 70`; do
 	touch "${TESTFILE}.${x}" 2> /dev/null || broken=1
 done
 echo "broken: ${broken}"
-umount "${SCRATCH_MNT}"
+_scratch_unmount 2>&1 | _filter_scratch
 
-echo "+ repair fs"
+echo "repair fs"
 _scratch_xfs_repair >> $seqres.full 2>&1
 
-echo "+ mount image (2)"
+echo "mount image (2)"
 _scratch_mount
 
-echo "+ chattr -R -i"
+echo "chattr -R -i"
 $CHATTR_PROG -R -f -i "${SCRATCH_MNT}/"
 
-echo "+ modify files (2)"
+echo "modify files (2)"
 broken=0
 for x in `seq 65 70`; do
 	touch "${TESTFILE}.${x}" || broken=1
 done
 echo "broken: ${broken}"
-umount "${SCRATCH_MNT}"
+_scratch_unmount
 
-echo "+ check fs (2)"
+echo "check fs (2)"
 _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
 
 status=0
diff --git a/tests/xfs/087.out b/tests/xfs/087.out
index 1f6e0b5..c4aee5a 100644
--- a/tests/xfs/087.out
+++ b/tests/xfs/087.out
@@ -1,15 +1,17 @@ 
 QA output created by 087
-+ create scratch fs
-+ mount fs image
-+ make some files
-+ check fs
-+ corrupt image
-+ mount image
-+ modify files
+create scratch fs
+mount fs image
+make some files
+check fs
+corrupt image
+mount image
+mount: Structure needs cleaning
+modify files
 broken: 1
-+ repair fs
-+ mount image (2)
-+ chattr -R -i
-+ modify files (2)
+umount: SCRATCH_DEV: not mounted.
+repair fs
+mount image (2)
+chattr -R -i
+modify files (2)
 broken: 0
-+ check fs (2)
+check fs (2)
diff --git a/tests/xfs/097 b/tests/xfs/097
index 303ad04..4d6fda5 100755
--- a/tests/xfs/097
+++ b/tests/xfs/097
@@ -60,15 +60,15 @@  rm -f $seqres.full
 TESTDIR="${SCRATCH_MNT}/scratchdir"
 TESTFILE="${TESTDIR}/testfile"
 
-echo "+ create scratch fs"
+echo "create scratch fs"
 _scratch_mkfs_xfs > /dev/null
 
-echo "+ mount fs image"
+echo "mount fs image"
 _scratch_mount
 xfs_info "${SCRATCH_MNT}" | grep -q "finobt=1" || _notrun "finobt not enabled"
 blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
 
-echo "+ make some files"
+echo "make some files"
 mkdir -p "${TESTDIR}"
 for x in `seq 1 1024`; do
 	touch "${SCRATCH_MNT}/junk.${x}"
@@ -83,45 +83,45 @@  for x in `seq 2 64`; do
 done
 inode="$(stat -c '%i' "${TESTFILE}.1")"
 agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
-umount "${SCRATCH_MNT}"
+_scratch_unmount 2>&1 | _filter_scratch
 
-echo "+ check fs"
+echo "check fs"
 _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
 
-echo "+ corrupt image"
+echo "corrupt image"
 for ag in $(seq 1 $((agcount - 1))) 0; do
 	_scratch_xfs_db -x -c "agi ${ag}" -c "agi ${ag}" -c "addr free_root" -c "stack" -c "blocktrash -x 32 -y $((blksz * 8)) -z ${FUZZ_ARGS}" >> $seqres.full 2>&1
 done
 
-echo "+ mount image"
-_scratch_mount
+echo "mount image"
+_try_scratch_mount 2>&1 | _filter_error_mount
 
-echo "+ modify files"
+echo "modify files"
 broken=0
 for x in `seq 65 70`; do
 	touch "${TESTFILE}.${x}" 2> /dev/null || broken=1
 done
 echo "broken: ${broken}"
-umount "${SCRATCH_MNT}"
+_scratch_unmount 2>&1 | _filter_scratch
 
-echo "+ repair fs"
+echo "repair fs"
 _scratch_xfs_repair >> $seqres.full 2>&1
 
-echo "+ mount image (2)"
+echo "mount image (2)"
 _scratch_mount
 
-echo "+ chattr -R -i"
+echo "chattr -R -i"
 $CHATTR_PROG -R -f -i "${SCRATCH_MNT}/"
 
-echo "+ modify files (2)"
+echo "modify files (2)"
 broken=0
 for x in `seq 65 70`; do
 	touch "${TESTFILE}.${x}" || broken=1
 done
 echo "broken: ${broken}"
-umount "${SCRATCH_MNT}"
+_scratch_unmount
 
-echo "+ check fs (2)"
+echo "check fs (2)"
 _scratch_xfs_repair -n >> $seqres.full 2>&1 || _fail "xfs_repair should not fail"
 
 status=0
diff --git a/tests/xfs/097.out b/tests/xfs/097.out
index 84f6a70..0eb2085 100644
--- a/tests/xfs/097.out
+++ b/tests/xfs/097.out
@@ -1,15 +1,17 @@ 
 QA output created by 097
-+ create scratch fs
-+ mount fs image
-+ make some files
-+ check fs
-+ corrupt image
-+ mount image
-+ modify files
+create scratch fs
+mount fs image
+make some files
+check fs
+corrupt image
+mount image
+mount: Structure needs cleaning
+modify files
 broken: 1
-+ repair fs
-+ mount image (2)
-+ chattr -R -i
-+ modify files (2)
+umount: SCRATCH_DEV: not mounted.
+repair fs
+mount image (2)
+chattr -R -i
+modify files (2)
 broken: 0
-+ check fs (2)
+check fs (2)