Message ID | 20180307140633.26182-1-jhogan@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
I initially misread the patch description (and imagined an entirely different problem). On 03/07/18 06:06, James Hogan wrote: > On dtb files which contain hyphens, the dt_S_dtb command to build the> dtb.S files (which allow DTB files to be built into the kernel) results> in errors like the following:> > bcm3368-netgear-cvg834g.dtb.S: Assembler messages:> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Please replace the following section: > This is due to the hyphen being used in symbol names. Replace all > hyphens > with underscores in the dt_S_dtb command to avoid this problem. > > Quite a lot of dts files have hyphens, but its only a problem on MIPS > where such files can be built into the kernel. For example when > CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is > used (in the latter case it admitedly shouldn't really build all the > dtb.o files, but thats a separate issue). with: cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so transform all hyphens from the file name to underscores when constructing the labels. > > Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") > Signed-off-by: James Hogan <jhogan@kernel.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Frank Rowand <frowand.list@gmail.com> > Cc: Masahiro Yamada <yamada.masahiro@socionext.com> > Cc: Michal Marek <michal.lkml@markovi.net> > Cc: Ralf Baechle <ralf@linux-mips.org> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Kevin Cernekee <cernekee@gmail.com> > Cc: devicetree@vger.kernel.org > Cc: linux-kbuild@vger.kernel.org > Cc: linux-mips@linux-mips.org > Cc: <stable@vger.kernel.org> # 4.9+ > --- > scripts/Makefile.lib | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib > index 5589bae34af6..a6f538b31ad6 100644 > --- a/scripts/Makefile.lib > +++ b/scripts/Makefile.lib > @@ -297,11 +297,11 @@ cmd_dt_S_dtb= \ > echo '\#include <asm-generic/vmlinux.lds.h>'; \ > echo '.section .dtb.init.rodata,"a"'; \ > echo '.balign STRUCT_ALIGNMENT'; \ > - echo '.global __dtb_$(*F)_begin'; \ > - echo '__dtb_$(*F)_begin:'; \ > + echo '.global __dtb_$(subst -,_,$(*F))_begin'; \ > + echo '__dtb_$(subst -,_,$(*F))_begin:'; \ > echo '.incbin "$<" '; \ > - echo '__dtb_$(*F)_end:'; \ > - echo '.global __dtb_$(*F)_end'; \ > + echo '__dtb_$(subst -,_,$(*F))_end:'; \ > + echo '.global __dtb_$(subst -,_,$(*F))_end'; \ > echo '.balign STRUCT_ALIGNMENT'; \ > ) > $@ > > Reviewed-by: Frank Rowand <frowand.list@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote: > I initially misread the patch description (and imagined an entirely > different problem). > > > On 03/07/18 06:06, James Hogan wrote: > > On dtb files which contain hyphens, the dt_S_dtb command to build the> dtb.S files (which allow DTB files to be built into the kernel) results> in errors like the following:> > bcm3368-netgear-cvg834g.dtb.S: Assembler messages:> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' > Please replace the following section: > > > This is due to the hyphen being used in symbol names. Replace all > > hyphens > > with underscores in the dt_S_dtb command to avoid this problem. > > > > Quite a lot of dts files have hyphens, but its only a problem on MIPS > > where such files can be built into the kernel. For example when > > CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is > > used (in the latter case it admitedly shouldn't really build all the > > dtb.o files, but thats a separate issue). > > with: > > cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree > FDT (that is, the .dtb file) as binary data in the kernel image. > This assembly source contains labels before and after the binary data. > The label names incorporate the file name of the corresponding .dtb > file. Hyphens are not legal characters in labels, so transform all > hyphens from the file name to underscores when constructing the labels. Thanks, that is clearer. I'll keep the paragraph about MIPS and the example configuration though, as I think its important information to reproduce the problem, and to justify why it wouldn't be appropriate to just rename the files (which was my first reaction). > Reviewed-by: Frank Rowand <frowand.list@gmail.com> Thanks James
On 03/07/18 12:25, James Hogan wrote: > On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote: >> I initially misread the patch description (and imagined an entirely >> different problem). >> >> >> On 03/07/18 06:06, James Hogan wrote: >>> On dtb files which contain hyphens, the dt_S_dtb command to build the> dtb.S files (which allow DTB files to be built into the kernel) results> in errors like the following:> > bcm3368-netgear-cvg834g.dtb.S: Assembler messages:> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' >> Please replace the following section: >> >>> This is due to the hyphen being used in symbol names. Replace all >>> hyphens >>> with underscores in the dt_S_dtb command to avoid this problem. >>> >>> Quite a lot of dts files have hyphens, but its only a problem on MIPS >>> where such files can be built into the kernel. For example when >>> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is >>> used (in the latter case it admitedly shouldn't really build all the >>> dtb.o files, but thats a separate issue). >> >> with: >> >> cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree >> FDT (that is, the .dtb file) as binary data in the kernel image. >> This assembly source contains labels before and after the binary data. >> The label names incorporate the file name of the corresponding .dtb >> file. Hyphens are not legal characters in labels, so transform all >> hyphens from the file name to underscores when constructing the labels. > > Thanks, that is clearer. > > I'll keep the paragraph about MIPS and the example configuration though, > as I think its important information to reproduce the problem, and to > justify why it wouldn't be appropriate to just rename the files (which > was my first reaction). Other than the part that says "its only a problem on MIPS". That is pedantically correct because no other architecture (that I am aware of, not that I searched) currently has a devicetree source file name with a hyphen in it, where that file is compiled into the kernel as an asm file. But it is potentially a problem on any architecture to it is misleading to label it as MIPS only. > >> Reviewed-by: Frank Rowand <frowand.list@gmail.com> > > Thanks > James > -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/07/18 06:06, James Hogan wrote: > On dtb files which contain hyphens, the dt_S_dtb command to build the > dtb.S files (which allow DTB files to be built into the kernel) results > in errors like the following: < snip > Hi James, Sorry for dribbling my comments out in so many emails. :-) Please change the subject line to say "dtb filenames" instead of "dtb files". Thanks, Frank -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 07, 2018 at 03:19:11PM -0800, Frank Rowand wrote: > On 03/07/18 12:25, James Hogan wrote: > > On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote: > >> On 03/07/18 06:06, James Hogan wrote: > >>> Quite a lot of dts files have hyphens, but its only a problem on MIPS > >>> where such files can be built into the kernel. For example when > >>> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is > >>> used (in the latter case it admitedly shouldn't really build all the > >>> dtb.o files, but thats a separate issue). > > I'll keep the paragraph about MIPS and the example configuration though, > > as I think its important information to reproduce the problem, and to > > justify why it wouldn't be appropriate to just rename the files (which > > was my first reaction). > > Other than the part that says "its only a problem on MIPS". That is > pedantically correct because no other architecture (that I am aware > of, not that I searched) currently has a devicetree source file name > with a hyphen in it, where that file is compiled into the kernel as > an asm file. But it is potentially a problem on any architecture > to it is misleading to label it as MIPS only. Okay I'll reword to make it clearer and do a v2. Thanks James
2018-03-08 16:09 GMT+09:00 James Hogan <jhogan@kernel.org>: > On Wed, Mar 07, 2018 at 03:19:11PM -0800, Frank Rowand wrote: >> On 03/07/18 12:25, James Hogan wrote: >> > On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote: >> >> On 03/07/18 06:06, James Hogan wrote: >> >>> Quite a lot of dts files have hyphens, but its only a problem on MIPS >> >>> where such files can be built into the kernel. For example when >> >>> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is >> >>> used (in the latter case it admitedly shouldn't really build all the >> >>> dtb.o files, but thats a separate issue). > >> > I'll keep the paragraph about MIPS and the example configuration though, >> > as I think its important information to reproduce the problem, and to >> > justify why it wouldn't be appropriate to just rename the files (which >> > was my first reaction). >> >> Other than the part that says "its only a problem on MIPS". That is >> pedantically correct because no other architecture (that I am aware >> of, not that I searched) currently has a devicetree source file name >> with a hyphen in it, where that file is compiled into the kernel as >> an asm file. But it is potentially a problem on any architecture >> to it is misleading to label it as MIPS only. > > Okay I'll reword to make it clearer and do a v2. > > Thanks > James The code looks good. If you send v2, I can shortly apply it to the fixes branch. If possible, I want to send a PR this weekend.
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 5589bae34af6..a6f538b31ad6 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -297,11 +297,11 @@ cmd_dt_S_dtb= \ echo '\#include <asm-generic/vmlinux.lds.h>'; \ echo '.section .dtb.init.rodata,"a"'; \ echo '.balign STRUCT_ALIGNMENT'; \ - echo '.global __dtb_$(*F)_begin'; \ - echo '__dtb_$(*F)_begin:'; \ + echo '.global __dtb_$(subst -,_,$(*F))_begin'; \ + echo '__dtb_$(subst -,_,$(*F))_begin:'; \ echo '.incbin "$<" '; \ - echo '__dtb_$(*F)_end:'; \ - echo '.global __dtb_$(*F)_end'; \ + echo '__dtb_$(subst -,_,$(*F))_end:'; \ + echo '.global __dtb_$(subst -,_,$(*F))_end'; \ echo '.balign STRUCT_ALIGNMENT'; \ ) > $@
On dtb files which contain hyphens, the dt_S_dtb command to build the dtb.S files (which allow DTB files to be built into the kernel) results in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' This is due to the hyphen being used in symbol names. Replace all hyphens with underscores in the dt_S_dtb command to avoid this problem. Quite a lot of dts files have hyphens, but its only a problem on MIPS where such files can be built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admitedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.9+ --- scripts/Makefile.lib | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)