diff mbox

video: fbdev: via_aux_vt1632: remove VLA usage

Message ID 20180307195415.GA666@embeddedgus (mailing list archive)
State New, archived
Headers show

Commit Message

Gustavo A. R. Silva March 7, 2018, 7:54 p.m. UTC
In preparation to enabling -Wvla, remove VLA and replace it
with a fixed-length array instead. Also, remove variable 'len'.

Notice that no new IDs have been added in seven years.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
 drivers/video/fbdev/via/via_aux_vt1632.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Emil Velikov March 8, 2018, 11:58 a.m. UTC | #1
Hi Gustavo,

On 7 March 2018 at 19:54, Gustavo A. R. Silva <gustavo@embeddedor.com> wrote:
> In preparation to enabling -Wvla, remove VLA and replace it
> with a fixed-length array instead. Also, remove variable 'len'.
>
What is the reason behind adding -Wvla? Is there a thread some that I
can read up on?

> Notice that no new IDs have been added in seven years.
>
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
> ---
>  drivers/video/fbdev/via/via_aux_vt1632.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/video/fbdev/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
> index d24f4cd..0cd0d2a 100644
> --- a/drivers/video/fbdev/via/via_aux_vt1632.c
> +++ b/drivers/video/fbdev/via/via_aux_vt1632.c
> @@ -35,10 +35,10 @@ static void probe(struct via_aux_bus *bus, u8 addr)
>                 .addr   =       addr,
>                 .name   =       name};
>         /* check vendor id and device id */
> -       const u8 id[] = {0x06, 0x11, 0x92, 0x31}, len = ARRAY_SIZE(id);
> -       u8 tmp[len];
> +       const u8 id[4] = {0x06, 0x11, 0x92, 0x31};
> +       u8 tmp[4];
>
> -       if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
> +       if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4))

Generally, hard coding a bunch of numbers like that makes for
confusing and fragile code.

A lot simpler and more obvious solution is like the following.
It silences the compiler warning (-Wvla - pedantic) you while keeping
the original clarity.

        const u8 id[] = {0x06, 0x11, 0x92, 0x31}, len = ARRAY_SIZE(id);
-       u8 tmp[len];
+       u8 tmp[ARRAY_SIZE(id)]; // Using len causes a Wvla warning

HTH
Emil
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Gustavo A. R. Silva March 8, 2018, 5:27 p.m. UTC | #2
Hi Emil,

On 03/08/2018 05:58 AM, Emil Velikov wrote:
> Hi Gustavo,
> 
> On 7 March 2018 at 19:54, Gustavo A. R. Silva <gustavo@embeddedor.com> wrote:
>> In preparation to enabling -Wvla, remove VLA and replace it
>> with a fixed-length array instead. Also, remove variable 'len'.
>>
> What is the reason behind adding -Wvla? Is there a thread some that I
> can read up on?
> 

Sure. This is the thread: https://lkml.org/lkml/2018/3/7/621

>> Notice that no new IDs have been added in seven years.
>>
>> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
>> ---
>>   drivers/video/fbdev/via/via_aux_vt1632.c | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/video/fbdev/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
>> index d24f4cd..0cd0d2a 100644
>> --- a/drivers/video/fbdev/via/via_aux_vt1632.c
>> +++ b/drivers/video/fbdev/via/via_aux_vt1632.c
>> @@ -35,10 +35,10 @@ static void probe(struct via_aux_bus *bus, u8 addr)
>>                  .addr   =       addr,
>>                  .name   =       name};
>>          /* check vendor id and device id */
>> -       const u8 id[] = {0x06, 0x11, 0x92, 0x31}, len = ARRAY_SIZE(id);
>> -       u8 tmp[len];
>> +       const u8 id[4] = {0x06, 0x11, 0x92, 0x31};
>> +       u8 tmp[4];
>>
>> -       if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
>> +       if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4))
> 
> Generally, hard coding a bunch of numbers like that makes for
> confusing and fragile code.
> 

You are correct.

> A lot simpler and more obvious solution is like the following.
> It silences the compiler warning (-Wvla - pedantic) you while keeping
> the original clarity.
> 
>          const u8 id[] = {0x06, 0x11, 0x92, 0x31}, len = ARRAY_SIZE(id);
> -       u8 tmp[len];
> +       u8 tmp[ARRAY_SIZE(id)]; // Using len causes a Wvla warning
> 

Yeah, this works just fine.

There are a total of four instances of this same issue in other files 
for the VIA component. I'll fix them and send a single patch shortly.

Thanks for the feedback.
I appreciate it.
--
Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/video/fbdev/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
index d24f4cd..0cd0d2a 100644
--- a/drivers/video/fbdev/via/via_aux_vt1632.c
+++ b/drivers/video/fbdev/via/via_aux_vt1632.c
@@ -35,10 +35,10 @@  static void probe(struct via_aux_bus *bus, u8 addr)
 		.addr	=	addr,
 		.name	=	name};
 	/* check vendor id and device id */
-	const u8 id[] = {0x06, 0x11, 0x92, 0x31}, len = ARRAY_SIZE(id);
-	u8 tmp[len];
+	const u8 id[4] = {0x06, 0x11, 0x92, 0x31};
+	u8 tmp[4];
 
-	if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
+	if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4))
 		return;
 
 	printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);