@@ -48,6 +48,7 @@ config MACH_MX28EVK
select MXS_HAVE_PLATFORM_FLEXCAN
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_HAVE_PLATFORM_USB
select MXS_OCOTP
help
Include support for MX28EVK platform. This includes specific
@@ -43,5 +43,9 @@ extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
+extern const struct mxs_usbh_data mx28_mxs_usbh_data[] __initconst;
+#define mx28_add_mxs_usbh(id, pdata) \
+ mxs_add_mxs_usbh(&mx28_mxs_usbh_data[id], pdata)
+
struct platform_device *__init mx28_add_mxsfb(
const struct mxsfb_platform_data *pdata);
@@ -23,3 +23,6 @@ config MXS_HAVE_PLATFORM_MXS_PWM
config MXS_HAVE_PLATFORM_MXSFB
bool
+
+config MXS_HAVE_PLATFORM_USB
+ bool
@@ -8,3 +8,4 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
obj-y += platform-gpio-mxs.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_USB) += platform-usb.o
new file mode 100644
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_usbh_data_entry_single(soc, _id, hwid) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _USBCTRL ## hwid ## _BASE_ADDR, \
+ .phy_iobase = soc ## _USBPHY ## hwid ## _BASE_ADDR, \
+ .irq = soc ## _INT_USB ## hwid, \
+ }
+
+#define mxs_usbh_data_entry(soc, _id, hwid) \
+ [_id] = mxs_usbh_data_entry_single(soc, _id, hwid)
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_usbh_data mx23_mxs_usbh_data[] __initconst = {
+ mxs_usbh_data_entry(MX23, 0, 0),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_usbh_data mx28_mxs_usbh_data[] __initconst = {
+ mxs_usbh_data_entry(MX28, 0, 0),
+ mxs_usbh_data_entry(MX28, 1, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_usbh(
+ const struct mxs_usbh_data *data,
+ struct mxc_usbh_platform_data *pdata)
+{
+ struct mxs_usb_private_date *usbh_private;
+ struct platform_device *pdev;
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ usbh_private = kmalloc(sizeof(*usbh_private), GFP_KERNEL);
+ if (!usbh_private)
+ return NULL;
+
+ usbh_private->phy_regs = ioremap(data->phy_iobase, SZ_8K);
+ usbh_private->ctrl_regs = ioremap(data->iobase, SZ_64K);
+ if (!usbh_private->phy_regs || !usbh_private->ctrl_regs)
+ goto out;
+
+ if (data->id == 0)
+ usbh_private->usb_phy_clk = clk_get(NULL, "usb0_phy");
+ else if (data->id == 1)
+ usbh_private->usb_phy_clk = clk_get(NULL, "usb1_phy");
+ else
+ BUG();
+ if (IS_ERR(usbh_private->usb_phy_clk))
+ goto out;
+
+ pdata->priv = usbh_private;
+
+ pdev = mxs_add_platform_device_dmamask("mxc-ehci", data->id,
+ res, ARRAY_SIZE(res), pdata,
+ sizeof(*pdata), DMA_BIT_MASK(32));
+ if (pdev)
+ return pdev;
+
+out:
+ if (usbh_private->usb_phy_clk)
+ clk_put(usbh_private->usb_phy_clk);
+ if (usbh_private->phy_regs)
+ iounmap(usbh_private->phy_regs);
+ if (usbh_private->ctrl_regs)
+ iounmap(usbh_private->ctrl_regs);
+ kfree(usbh_private);
+
+ return NULL;
+}
@@ -26,4 +26,6 @@
#define IOMEM(addr) ((void __force __iomem *)(addr))
#endif
+#include "mxs.h"
+
#endif /* __MACH_MXS_HARDWARE_H__ */
@@ -64,8 +64,8 @@
#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000)
#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000)
#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000)
-#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000)
-#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000)
+#define MX23_USBPHY0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000)
+#define MX23_USBCTRL0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000)
#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000)
#define MX23_IO_P2V(x) MXS_IO_P2V(x)
@@ -89,8 +89,8 @@
#define MX23_INT_SPDIF_ERROR 10
#define MX23_INT_SAIF1_IRQ 10
#define MX23_INT_SAIF2_IRQ 10
-#define MX23_INT_USB_CTRL 11
-#define MX23_INT_USB_WAKEUP 12
+#define MX23_INT_USB0 11
+#define MX23_INT_USB0_WAKEUP 12
#define MX23_INT_GPMI_DMA 13
#define MX23_INT_SSP1_DMA 14
#define MX23_INT_SSP1_ERROR 15
@@ -35,7 +35,17 @@
machine_is_mx28evk() || \
machine_is_tx28() || \
0)
-
+#define cpu_is_mx1() 0
+#define cpu_is_mx21() 0
+#define cpu_is_mx25() 0
+#define cpu_is_mx27() 0
+#define cpu_is_mx31() 0
+#define cpu_is_mx35() 0
+#define cpu_is_mx50() 0
+#define cpu_is_mx51() 0
+#define cpu_is_mx53() 0
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
/*
* IO addresses common to MXS-based
*/
@@ -27,6 +27,7 @@
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
+#include "usbh.h"
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
@@ -355,6 +356,14 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
},
};
+static struct mxc_usbh_platform_data usbh_pdata __initdata = {
+ .init = fsl_usb_host_init,
+ .exit = fsl_usb_host_uninit,
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .otg = NULL,
+ .plt_irq_handler = fsl_plt_usbh_irq_handler,
+};
+
static void __init mx28evk_init(void)
{
int ret;
@@ -412,6 +421,8 @@ static void __init mx28evk_init(void)
"usb1-power-en");
if (ret)
pr_warn("failed to request gpio usb1-power-en %d\n", ret);
+ mx28_add_mxs_usbh(1, &usbh_pdata);
+
gpio_led_register_device(0, &mx28evk_led_data);
}
add usb phy register definitions and functions usb host driver will use these callback functions to initialize usb phy and change working mode Signed-off-by: Tony Lin <tony.lin@freescale.com> --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/devices-mx28.h | 4 + arch/arm/mach-mxs/devices/Kconfig | 3 + arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-usb.c | 96 +++++++++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/hardware.h | 2 + arch/arm/mach-mxs/include/mach/mx23.h | 8 +- arch/arm/mach-mxs/include/mach/mxs.h | 12 +++- arch/arm/mach-mxs/mach-mx28evk.c | 11 +++ 9 files changed, 133 insertions(+), 5 deletions(-)