diff mbox

[05/11] staging: iio: ad7746: Remove unused defines

Message ID 1521642539-4845-6-git-send-email-hernan@vanguardiasur.com.ar (mailing list archive)
State New, archived
Headers show

Commit Message

Hernán Gonzalez March 21, 2018, 2:28 p.m. UTC
Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
---
 drivers/staging/iio/cdc/ad7746.c | 16 ----------------
 drivers/staging/iio/cdc/ad7746.h |  5 -----
 2 files changed, 21 deletions(-)

Comments

Jonathan Cameron March 23, 2018, 12:44 p.m. UTC | #1
On Wed, 21 Mar 2018 11:28:53 -0300
Hernán Gonzalez <hernan@vanguardiasur.com.ar> wrote:

> Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Hmm. This sort of patch is always a trade off between
clearing out unused code and the fact that the defines
sometimes provide useful information even when not
actually used.

> ---
>  drivers/staging/iio/cdc/ad7746.c | 16 ----------------
>  drivers/staging/iio/cdc/ad7746.h |  5 -----
>  2 files changed, 21 deletions(-)
> 
> diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> index 57623db..cba8cd1 100644
> --- a/drivers/staging/iio/cdc/ad7746.c
> +++ b/drivers/staging/iio/cdc/ad7746.c
> @@ -25,7 +25,6 @@
>   * AD7746 Register Definition
>   */
>  
> -#define AD7746_REG_STATUS		0
>  #define AD7746_REG_CAP_DATA_HIGH	1
>  #define AD7746_REG_VT_DATA_HIGH		4
>  #define AD7746_REG_CAP_SETUP		7
> @@ -38,17 +37,10 @@
>  #define AD7746_REG_CAP_GAINH		15
>  #define AD7746_REG_VOLT_GAINH		17
>  
> -/* Status Register Bit Designations (AD7746_REG_STATUS) */
> -#define AD7746_STATUS_EXCERR		BIT(3)
> -#define AD7746_STATUS_RDY		BIT(2)
> -#define AD7746_STATUS_RDYVT		BIT(1)
> -#define AD7746_STATUS_RDYCAP		BIT(0)
> -
Hmm. My gut feeling is the driver really should be reading this
register... Ah well.  Perhaps it can go in the meantime.

>  /* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
>  #define AD7746_CAPSETUP_CAPEN		BIT(7)
>  #define AD7746_CAPSETUP_CIN2		BIT(6) /* AD7746 only */
>  #define AD7746_CAPSETUP_CAPDIFF		BIT(5)
> -#define AD7746_CAPSETUP_CACHOP		BIT(0)
Don't remove definitions of 'parts' of a register.
It is odd to only have some parts described.

>  
>  /* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
>  #define AD7746_VTSETUP_VTEN		(1 << 7)
> @@ -56,13 +48,8 @@
>  #define AD7746_VTSETUP_VTMD_EXT_TEMP	(1 << 5)
>  #define AD7746_VTSETUP_VTMD_VDD_MON	(2 << 5)
>  #define AD7746_VTSETUP_VTMD_EXT_VIN	(3 << 5)
> -#define AD7746_VTSETUP_EXTREF		BIT(4)
> -#define AD7746_VTSETUP_VTSHORT		BIT(1)
> -#define AD7746_VTSETUP_VTCHOP		BIT(0)
Same comment, keep these as odd to not know if the rest of the register
is used etc...
>  
>  /* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
> -#define AD7746_EXCSETUP_CLKCTRL		BIT(7)
> -#define AD7746_EXCSETUP_EXCON		BIT(6)
>  #define AD7746_EXCSETUP_EXCB		BIT(5)
>  #define AD7746_EXCSETUP_NEXCB		BIT(4)
>  #define AD7746_EXCSETUP_EXCA		BIT(3)
> @@ -74,10 +61,7 @@
>  #define AD7746_CONF_CAPFS_SHIFT		3
>  #define AD7746_CONF_VTFS_MASK		GENMASK(7, 6)
>  #define AD7746_CONF_CAPFS_MASK		GENMASK(5, 3)
> -#define AD7746_CONF_MODE_IDLE		(0 << 0)
> -#define AD7746_CONF_MODE_CONT_CONV	(1 << 0)
>  #define AD7746_CONF_MODE_SINGLE_CONV	(2 << 0)
> -#define AD7746_CONF_MODE_PWRDN		(3 << 0)
This is really nasty.  Some particular values may not be used
in the driver (and they should be - for example we should power
down on remove).  Don't remove their definitions.
>  #define AD7746_CONF_MODE_OFFS_CAL	(5 << 0)
>  #define AD7746_CONF_MODE_GAIN_CAL	(6 << 0)
>  
> diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
> index ea8572d..2fbcee8 100644
> --- a/drivers/staging/iio/cdc/ad7746.h
> +++ b/drivers/staging/iio/cdc/ad7746.h
> @@ -13,11 +13,6 @@
>   * TODO: struct ad7746_platform_data needs to go into include/linux/iio
>   */
>  
> -#define AD7466_EXCLVL_0		0 /* +-VDD/8 */
> -#define AD7466_EXCLVL_1		1 /* +-VDD/4 */
> -#define AD7466_EXCLVL_2		2 /* +-VDD * 3/8 */
> -#define AD7466_EXCLVL_3		3 /* +-VDD/2 */
This is used...  If you wanted to use the platform data you would
need these to fill it.

Jonathan
> -
>  struct ad7746_platform_data {
>  	unsigned char exclvl;	/*Excitation Voltage Level */
>  	bool exca_en;		/* enables EXCA pin as the excitation output */

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 57623db..cba8cd1 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -25,7 +25,6 @@ 
  * AD7746 Register Definition
  */
 
-#define AD7746_REG_STATUS		0
 #define AD7746_REG_CAP_DATA_HIGH	1
 #define AD7746_REG_VT_DATA_HIGH		4
 #define AD7746_REG_CAP_SETUP		7
@@ -38,17 +37,10 @@ 
 #define AD7746_REG_CAP_GAINH		15
 #define AD7746_REG_VOLT_GAINH		17
 
-/* Status Register Bit Designations (AD7746_REG_STATUS) */
-#define AD7746_STATUS_EXCERR		BIT(3)
-#define AD7746_STATUS_RDY		BIT(2)
-#define AD7746_STATUS_RDYVT		BIT(1)
-#define AD7746_STATUS_RDYCAP		BIT(0)
-
 /* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
 #define AD7746_CAPSETUP_CAPEN		BIT(7)
 #define AD7746_CAPSETUP_CIN2		BIT(6) /* AD7746 only */
 #define AD7746_CAPSETUP_CAPDIFF		BIT(5)
-#define AD7746_CAPSETUP_CACHOP		BIT(0)
 
 /* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
 #define AD7746_VTSETUP_VTEN		(1 << 7)
@@ -56,13 +48,8 @@ 
 #define AD7746_VTSETUP_VTMD_EXT_TEMP	(1 << 5)
 #define AD7746_VTSETUP_VTMD_VDD_MON	(2 << 5)
 #define AD7746_VTSETUP_VTMD_EXT_VIN	(3 << 5)
-#define AD7746_VTSETUP_EXTREF		BIT(4)
-#define AD7746_VTSETUP_VTSHORT		BIT(1)
-#define AD7746_VTSETUP_VTCHOP		BIT(0)
 
 /* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
-#define AD7746_EXCSETUP_CLKCTRL		BIT(7)
-#define AD7746_EXCSETUP_EXCON		BIT(6)
 #define AD7746_EXCSETUP_EXCB		BIT(5)
 #define AD7746_EXCSETUP_NEXCB		BIT(4)
 #define AD7746_EXCSETUP_EXCA		BIT(3)
@@ -74,10 +61,7 @@ 
 #define AD7746_CONF_CAPFS_SHIFT		3
 #define AD7746_CONF_VTFS_MASK		GENMASK(7, 6)
 #define AD7746_CONF_CAPFS_MASK		GENMASK(5, 3)
-#define AD7746_CONF_MODE_IDLE		(0 << 0)
-#define AD7746_CONF_MODE_CONT_CONV	(1 << 0)
 #define AD7746_CONF_MODE_SINGLE_CONV	(2 << 0)
-#define AD7746_CONF_MODE_PWRDN		(3 << 0)
 #define AD7746_CONF_MODE_OFFS_CAL	(5 << 0)
 #define AD7746_CONF_MODE_GAIN_CAL	(6 << 0)
 
diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
index ea8572d..2fbcee8 100644
--- a/drivers/staging/iio/cdc/ad7746.h
+++ b/drivers/staging/iio/cdc/ad7746.h
@@ -13,11 +13,6 @@ 
  * TODO: struct ad7746_platform_data needs to go into include/linux/iio
  */
 
-#define AD7466_EXCLVL_0		0 /* +-VDD/8 */
-#define AD7466_EXCLVL_1		1 /* +-VDD/4 */
-#define AD7466_EXCLVL_2		2 /* +-VDD * 3/8 */
-#define AD7466_EXCLVL_3		3 /* +-VDD/2 */
-
 struct ad7746_platform_data {
 	unsigned char exclvl;	/*Excitation Voltage Level */
 	bool exca_en;		/* enables EXCA pin as the excitation output */