diff mbox

[RESEND,v6,5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie

Message ID 20180328170327.5395-5-enric.balletbo@collabora.com (mailing list archive)
State New, archived
Headers show

Commit Message

Enric Balletbo i Serra March 28, 2018, 5:03 p.m. UTC 
The minnie devices comes with an AUO B101EAN01 panel which is different
from default veyron devices, thus the power on/off timing sequence is
slightly different. The datasheet specifies a pwm delay of 200 ms, so
update the PMW delay proprieties accordingly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v5:
 - None.
Changes since v4:
 - Rebase on top of mainline.
Changes since v3:
 - Use new -ms names for proprieties.
 - Fix the delay, should be 200ms instead of 20ms (Pavel)
Changes since v2:
 - Use new names for proprieties.
Changes since v1:
 - Add this new patch as minnie has differents timings
---
 arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++
 1 file changed, 2 insertions(+)

Comments

Heiko Stübner April 10, 2018, 1:04 p.m. UTC | #1 
Am Mittwoch, 28. März 2018, 19:03:27 CEST schrieb Enric Balletbo i Serra:
> The minnie devices comes with an AUO B101EAN01 panel which is different
> from default veyron devices, thus the power on/off timing sequence is
> slightly different. The datasheet specifies a pwm delay of 200 ms, so
> update the PMW delay proprieties accordingly.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Acked-by: Pavel Machek <pavel@ucw.cz>

applied for 4.18

Thanks
Heiko
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 544de6027aaa..4c5307e62001 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -123,6 +123,8 @@ 
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
 	power-supply = <&backlight_regulator>;
+	post-pwm-on-delay-ms = <200>;
+	pwm-off-delay-ms = <200>;
 };
 
 &emmc {