@@ -78,6 +78,13 @@ int sdw_add_bus_master(struct sdw_bus *bus)
return ret;
}
+ /*
+ * Default active bank will be 0 as out of reset the Slaves have
+ * to start with bank 0 (Table 40 of Spec)
+ */
+ bus->params.curr_bank = SDW_BANK0;
+ bus->params.next_bank = SDW_BANK1;
+
return 0;
}
EXPORT_SYMBOL(sdw_add_bus_master);
@@ -45,6 +45,11 @@ struct sdw_msg {
bool page;
};
+#define SDW_DOUBLE_RATE_FACTOR 2
+
+extern int rows[SDW_FRAME_ROWS];
+extern int cols[SDW_FRAME_COLS];
+
/**
* sdw_port_runtime: Runtime port parameters for Master or Slave
*
@@ -15,6 +15,43 @@
#include <linux/soundwire/sdw.h>
#include "bus.h"
+/*
+ * Array of supported rows and columns as per MIPI SoundWire Specification 1.1
+ *
+ * The rows are arranged as per the array index value programmed
+ * in register. The index 15 has dummy value 0 in order to fill hole.
+ */
+int rows[SDW_FRAME_ROWS] = {48, 50, 60, 64, 75, 80, 125, 147,
+ 96, 100, 120, 128, 150, 160, 250, 0,
+ 192, 200, 240, 256, 72, 144, 90, 180};
+
+int cols[SDW_FRAME_COLS] = {2, 4, 6, 8, 10, 12, 14, 16};
+
+static int sdw_find_col_index(int col)
+{
+ int i;
+
+ for (i = 0; i < SDW_FRAME_COLS; i++) {
+ if (cols[i] == col)
+ return i;
+ }
+
+ pr_warn("Requested column not found, selecting lowest column no: 2\n");
+ return 0;
+}
+
+static int sdw_find_row_index(int row)
+{
+ int i;
+
+ for (i = 0; i < SDW_FRAME_ROWS; i++) {
+ if (rows[i] == row)
+ return i;
+ }
+
+ pr_warn("Requested row not found, selecting lowest row no: 48\n");
+ return 0;
+}
static int _sdw_program_slave_port_params(struct sdw_bus *bus,
struct sdw_slave *slave,
struct sdw_transport_params *t_params,
@@ -504,6 +541,201 @@ static int sdw_prep_deprep_ports(struct sdw_master_runtime *m_rt, bool prep)
}
/**
+ * sdw_notify_config: Notify bus configuration
+ *
+ * @m_rt: Master runtime handle
+ *
+ * This function notifies the Master(s) and Slave(s) of the
+ * new bus configuration.
+ */
+static int sdw_notify_config(struct sdw_master_runtime *m_rt)
+{
+ struct sdw_slave_runtime *s_rt;
+ struct sdw_bus *bus = m_rt->bus;
+ struct sdw_slave *slave;
+ int ret = 0;
+
+ if (bus->ops->set_bus_conf) {
+ ret = bus->ops->set_bus_conf(bus, &bus->params);
+ if (ret < 0)
+ return ret;
+ }
+
+ list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
+ slave = s_rt->slave;
+
+ if (slave->ops->bus_config) {
+ ret = slave->ops->bus_config(slave, &bus->params);
+ if (ret < 0)
+ dev_err(bus->dev, "Notify Slave: %d failed",
+ slave->dev_num);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * sdw_program_params: Program transport and port parameters for Master(s)
+ * and Slave(s)
+ *
+ * @bus: SDW bus instance
+ */
+static int sdw_program_params(struct sdw_bus *bus)
+{
+ struct sdw_master_runtime *m_rt = NULL;
+ int ret = 0;
+
+ list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
+ ret = sdw_program_port_params(m_rt);
+ if (ret < 0) {
+ dev_err(bus->dev,
+ "Program transport params failed: %d", ret);
+ return ret;
+ }
+
+ ret = sdw_notify_config(m_rt);
+ if (ret < 0) {
+ dev_err(bus->dev, "Notify bus config failed: %d", ret);
+ return ret;
+ }
+
+ /* Enable port(s) on alternate bank for all active streams */
+ if (m_rt->stream->state != SDW_STREAM_ENABLED)
+ continue;
+
+ ret = sdw_enable_disable_ports(m_rt, true);
+ if (ret < 0) {
+ dev_err(bus->dev, "Enable channel failed: %d", ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int _sdw_bank_switch(struct sdw_bus *bus)
+{
+ int col_index, row_index;
+ struct sdw_msg *wr_msg;
+ u8 *wbuf = NULL;
+ int ret = 0;
+ u16 addr;
+
+ wr_msg = kzalloc(sizeof(*wr_msg), GFP_KERNEL);
+ if (!wr_msg)
+ return -ENOMEM;
+
+ wbuf = kzalloc(sizeof(*wbuf), GFP_KERNEL);
+ if (!wbuf) {
+ ret = -ENOMEM;
+ goto error_1;
+ }
+
+ /* Get row and column index to program register */
+ col_index = sdw_find_col_index(bus->params.col);
+ row_index = sdw_find_row_index(bus->params.row);
+ wbuf[0] = col_index | (row_index << 3);
+
+ if (bus->params.next_bank)
+ addr = SDW_SCP_FRAMECTRL_B1;
+ else
+ addr = SDW_SCP_FRAMECTRL_B0;
+
+ sdw_fill_msg(wr_msg, NULL, addr, 1, SDW_BROADCAST_DEV_NUM,
+ SDW_MSG_FLAG_WRITE, wbuf);
+ wr_msg->ssp_sync = true;
+
+ ret = sdw_transfer(bus, wr_msg);
+ if (ret < 0) {
+ dev_err(bus->dev, "Slave frame_ctrl reg write failed");
+ goto error;
+ }
+
+ kfree(wr_msg);
+ kfree(wbuf);
+ bus->defer_msg.msg = NULL;
+ bus->params.curr_bank = !bus->params.curr_bank;
+ bus->params.next_bank = !bus->params.next_bank;
+
+ return 0;
+
+error:
+ kfree(wbuf);
+error_1:
+ kfree(wr_msg);
+ return ret;
+}
+
+static int sdw_bank_switch(struct sdw_bus *bus)
+{
+ const struct sdw_master_ops *ops = bus->ops;
+ int ret = 0;
+
+ /* Pre-bank switch */
+ if (ops->pre_bank_switch) {
+ ret = ops->pre_bank_switch(bus);
+ if (ret < 0) {
+ dev_err(bus->dev, "Pre bank switch op failed: %d", ret);
+ return ret;
+ }
+ }
+
+ /* Bank-switch */
+ ret = _sdw_bank_switch(bus);
+ if (ret < 0) {
+ dev_err(bus->dev, "Bank switch op failed: %d", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sdw_post_bank_switch(struct sdw_stream_runtime *stream)
+{
+ struct sdw_master_runtime *m_rt = stream->m_rt;
+ const struct sdw_master_ops *ops;
+ struct sdw_bus *bus = m_rt->bus;
+ int ret = 0;
+
+ ops = bus->ops;
+
+ /* Post-bank switch */
+ if (ops->post_bank_switch) {
+ ret = ops->post_bank_switch(bus);
+ if (ret < 0) {
+ dev_err(bus->dev,
+ "Post bank switch op failed: %d", ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int do_bank_switch(struct sdw_stream_runtime *stream)
+{
+ struct sdw_master_runtime *m_rt = stream->m_rt;
+ struct sdw_bus *bus = m_rt->bus;
+ int ret;
+
+ /* Bank switch */
+ ret = sdw_bank_switch(bus);
+ if (ret < 0) {
+ dev_err(bus->dev, "Bank switch failed: %d", ret);
+ goto err;
+ }
+
+ ret = sdw_post_bank_switch(stream);
+ if (ret < 0)
+ dev_err(bus->dev, "Post Bank switch failed: %d", ret);
+
+err:
+ return ret;
+}
+
+/**
* sdw_release_stream: Free the assigned stream runtime
*
* @stream: SoundWire stream runtime
@@ -23,7 +23,17 @@ struct sdw_slave;
#define SDW_MASTER_DEV_NUM 14
#define SDW_NUM_DEV_ID_REGISTERS 6
+/* frame shape defines */
+/*
+ * Note: The maximum row define in SoundWire spec 1.1 is 23. In order to
+ * fill hole with 0, one more dummy entry is added
+ */
+#define SDW_FRAME_ROWS 24
+#define SDW_FRAME_COLS 8
+#define SDW_FRAME_ROW_COLS (SDW_FRAME_ROWS * SDW_FRAME_COLS)
+
+#define SDW_FRAME_CTRL_BITS 48
#define SDW_MAX_DEVICES 11
#define SDW_VALID_PORT_RANGE(n) (n <= 14 && n >= 1)
@@ -377,6 +387,21 @@ enum sdw_reg_bank {
};
/**
+ * struct sdw_bus_conf: Bus configuration
+ *
+ * @clk_freq: Clock frequency, in Hz
+ * @num_rows: Number of rows in frame
+ * @num_cols: Number of columns in frame
+ * @bank: Next register bank
+ */
+struct sdw_bus_conf {
+ unsigned int clk_freq;
+ unsigned int num_rows;
+ unsigned int num_cols;
+ unsigned int bank;
+};
+
+/**
* struct sdw_prepare_ch: Prepare/De-prepare Data Port channel
*
* @num: Port number
@@ -413,10 +438,20 @@ enum sdw_port_prep_ops {
* @curr_bank: Current bank in use (BANK0/BANK1)
* @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be
* set to !curr_bank
+ * @max_dr_freq: Maximum double rate clock frequency supported, in Hz
+ * @curr_dr_freq: Current double rate clock frequency, in Hz
+ * @bandwidth: Current bandwidth
+ * @col: Active columns
+ * @row: Active rows
*/
struct sdw_bus_params {
enum sdw_reg_bank curr_bank;
enum sdw_reg_bank next_bank;
+ unsigned int max_dr_freq;
+ unsigned int curr_dr_freq;
+ unsigned int bandwidth;
+ unsigned int col;
+ unsigned int row;
};
/**
@@ -426,6 +461,7 @@ struct sdw_bus_params {
* @interrupt_callback: Device interrupt notification (invoked in thread
* context)
* @update_status: Update Slave status
+ * @bus_config: Update the bus config for Slave
* @port_prep: Prepare the port with parameters
*/
struct sdw_slave_ops {
@@ -434,6 +470,8 @@ struct sdw_slave_ops {
struct sdw_slave_intr_status *status);
int (*update_status)(struct sdw_slave *slave,
enum sdw_slave_status status);
+ int (*bus_config)(struct sdw_slave *slave,
+ struct sdw_bus_params *params);
int (*port_prep)(struct sdw_slave *slave,
struct sdw_prepare_ch *prepare_ch,
enum sdw_port_prep_ops pre_ops);
@@ -597,6 +635,9 @@ struct sdw_defer {
* @xfer_msg: Transfer message callback
* @xfer_msg_defer: Defer version of transfer message callback
* @reset_page_addr: Reset the SCP page address registers
+ * @set_bus_conf: Set the bus configuration
+ * @pre_bank_switch: Callback for pre bank switch
+ * @post_bank_switch: Callback for post bank switch
*/
struct sdw_master_ops {
int (*read_prop)(struct sdw_bus *bus);
@@ -608,6 +649,11 @@ struct sdw_master_ops {
struct sdw_defer *defer);
enum sdw_command_response (*reset_page_addr)
(struct sdw_bus *bus, unsigned int dev_num);
+ int (*set_bus_conf)(struct sdw_bus *bus,
+ struct sdw_bus_params *params);
+ int (*pre_bank_switch)(struct sdw_bus *bus);
+ int (*post_bank_switch)(struct sdw_bus *bus);
+
};
/**
@@ -628,6 +674,7 @@ struct sdw_master_ops {
* transport and port parameters
* @defer_msg: Defer message
* @clk_stop_timeout: Clock stop timeout computed
+ * @bank_switch_timeout: Bank switch timeout computed
*/
struct sdw_bus {
struct device *dev;
@@ -643,6 +690,7 @@ struct sdw_bus {
struct list_head m_rt_list;
struct sdw_defer defer_msg;
unsigned int clk_stop_timeout;
+ u32 bank_switch_timeout;
};
int sdw_add_bus_master(struct sdw_bus *bus);