diff mbox

[1/2] i2c: exynos5: remove some dead code

Message ID 20180509194532.28929-1-peda@axentia.se (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Rosin May 9, 2018, 7:45 p.m. UTC
The else branch cannot be taken as i will always equal num.
Get rid of the whole construct.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/i2c/busses/i2c-exynos5.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

Comments

Andrzej Hajda May 10, 2018, 8:36 a.m. UTC | #1
On 09.05.2018 21:45, Peter Rosin wrote:
> The else branch cannot be taken as i will always equal num.
> Get rid of the whole construct.
>
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
>  drivers/i2c/busses/i2c-exynos5.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
> index 12ec8484e653..a2cbc779c33a 100644
> --- a/drivers/i2c/busses/i2c-exynos5.c
> +++ b/drivers/i2c/busses/i2c-exynos5.c
> @@ -727,17 +727,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
>  			goto out;
>  	}
>  
> -	if (i == num) {
> -		ret = num;
> -	} else {
> -		/* Only one message, cannot access the device */
> -		if (i == 1)
> -			ret = -EREMOTEIO;
> -		else
> -			ret = i;
> -
> -		dev_warn(i2c->dev, "xfer message failed\n");
> -	}
> +	ret = num;
>  
>   out:
>  	clk_disable(i2c->clk);

You can go further and remove "out:" label, use break instead, and at
the end use "return (i == num) ? num : ret;" or sth similar.

With this change you can add:

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

 --
Regards
Andrzej
Peter Rosin May 10, 2018, 7:16 p.m. UTC | #2
On 2018-05-10 10:36, Andrzej Hajda wrote:
> On 09.05.2018 21:45, Peter Rosin wrote:
>> The else branch cannot be taken as i will always equal num.
>> Get rid of the whole construct.
>>
>> Signed-off-by: Peter Rosin <peda@axentia.se>
>> ---
>>  drivers/i2c/busses/i2c-exynos5.c | 12 +-----------
>>  1 file changed, 1 insertion(+), 11 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
>> index 12ec8484e653..a2cbc779c33a 100644
>> --- a/drivers/i2c/busses/i2c-exynos5.c
>> +++ b/drivers/i2c/busses/i2c-exynos5.c
>> @@ -727,17 +727,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
>>  			goto out;
>>  	}
>>  
>> -	if (i == num) {
>> -		ret = num;
>> -	} else {
>> -		/* Only one message, cannot access the device */
>> -		if (i == 1)
>> -			ret = -EREMOTEIO;
>> -		else
>> -			ret = i;
>> -
>> -		dev_warn(i2c->dev, "xfer message failed\n");
>> -	}
>> +	ret = num;
>>  
>>   out:
>>  	clk_disable(i2c->clk);
> 
> You can go further and remove "out:" label, use break instead, and at
> the end use "return (i == num) ? num : ret;" or sth similar.
> 
> With this change you can add:
> 
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

But then the patch wouldn't be so obviously safe. If I would write
a function equivalent to the original function, I think I'd write
something like:

static int exynos5_i2c_xfer(struct i2c_adapter *adap,
			    struct i2c_msg *msgs, int num)
{
	struct exynos5_i2c *i2c = adap->algo_data;
	int i, ret;

	if (i2c->suspended) {
		dev_err(i2c->dev, "HS-I2C is not initialized.\n");
		return -EIO;
	}

	ret = clk_enable(i2c->clk);
	if (ret)
		return ret;

	for (i = 0; !ret && i < num; i++)
		ret = exynos5_i2c_xfer_msg(i2c, msgs + i, i == num - 1);

	clk_disable(i2c->clk);

	return ret ?: num;
}

And I think that is safe because I don't see any possibility for
exynos_i2c_xfer_msg to return anything but zero success or negative
errors. Since I can only compile-test, so I do not feel all that
good about going further than I did.

But if you or anyone can test the above function, feel free to make
a patch out of it. I don't care enough to make a bunch of iterations
on these trivialities. I just spotted dead code and dumb initializers
while looking for other things. So, take it or leave it. I.e. it was
just a couple of drive-by patches.

Cheers,
Peter
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 12ec8484e653..a2cbc779c33a 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -727,17 +727,7 @@  static int exynos5_i2c_xfer(struct i2c_adapter *adap,
 			goto out;
 	}
 
-	if (i == num) {
-		ret = num;
-	} else {
-		/* Only one message, cannot access the device */
-		if (i == 1)
-			ret = -EREMOTEIO;
-		else
-			ret = i;
-
-		dev_warn(i2c->dev, "xfer message failed\n");
-	}
+	ret = num;
 
  out:
 	clk_disable(i2c->clk);