diff mbox

[v2,3/5] arm64: dts: rockchip: Add gpio-mute to rk3328

Message ID 1526615528-9707-3-git-send-email-djw@t-chip.com.cn (mailing list archive)
State New, archived
Headers show

Commit Message

Levin May 18, 2018, 3:52 a.m. UTC 
From: Levin Du <djw@t-chip.com.cn>

Adding a new gpio controller named "gpio-mute" to rk3328, providing
access to the GPIO_MUTE pin defined in the syscon GRF_SOC_CON10.

The GPIO_MUTE pin is referred to as <&gpio-mute 1>.

Signed-off-by: Levin Du <djw@t-chip.com.cn>

---

Changes in v2:
- Rename gpio_syscon10 to gpio_mute in rk3328.dtsi

Changes in v1:
- Split from V0 and add to rk3328.dtsi for general use.

 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b8e9da1..5ba29d3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -309,6 +309,13 @@ 
 			mode-loader = <BOOT_BL_DOWNLOAD>;
 		};
 
+		/* The GPIO_MUTE pin is referred to as <&gpio-mute 1>.*/
+		gpio_mute: gpio-mute {
+			compatible = "rockchip,gpio-syscon";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <0 0x0428 0>;
+		};
 	};
 
 	uart0: serial@ff110000 {