diff mbox

[v4,3/3] arm64: dts: renesas: r8a77995: add thermal device support

Message ID 1526808379-3850-4-git-send-email-ykaneko0929@gmail.com (mailing list archive)
State Accepted
Commit 21bd05387fe6643a6f1cdfe395e85725fd296f6c
Delegated to: Simon Horman
Headers show

Commit Message

Yoshihiro Kaneko May 20, 2018, 9:26 a.m. UTC 
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Simon Horman May 23, 2018, 8:44 a.m. UTC | #1 
On Sun, May 20, 2018 at 06:26:19PM +0900, Yoshihiro Kaneko wrote:
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied.
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 82aed7e..d4884e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -216,6 +216,18 @@ 
 			#power-domain-cells = <1>;
 		};
 
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -785,6 +797,25 @@ 
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,