| Message ID | 20180521140402.23318-20-peter.maydell@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Peter Maydell <peter.maydell@linaro.org> writes: > Implement the missing registers for the TZ MPC. > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> > --- > include/hw/misc/tz-mpc.h | 10 +++ > hw/misc/tz-mpc.c | 137 ++++++++++++++++++++++++++++++++++++++- > 2 files changed, 144 insertions(+), 3 deletions(-) > > diff --git a/include/hw/misc/tz-mpc.h b/include/hw/misc/tz-mpc.h > index b5eaf1699e..1fff4d6029 100644 > --- a/include/hw/misc/tz-mpc.h > +++ b/include/hw/misc/tz-mpc.h > @@ -48,6 +48,16 @@ struct TZMPC { > > /*< public >*/ > > + /* State */ > + uint32_t ctrl; > + uint32_t blk_idx; > + uint32_t int_stat; > + uint32_t int_en; > + uint32_t int_info1; > + uint32_t int_info2; > + > + uint32_t *blk_lut; > + > qemu_irq irq; > > /* Properties */ > diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c > index d4467ccc3b..93453cbef2 100644 > --- a/hw/misc/tz-mpc.c > +++ b/hw/misc/tz-mpc.c > @@ -28,16 +28,23 @@ enum { > > /* Config registers */ > REG32(CTRL, 0x00) > + FIELD(CTRL, SEC_RESP, 4, 1) > + FIELD(CTRL, AUTOINC, 8, 1) > + FIELD(CTRL, LOCKDOWN, 31, 1) > REG32(BLK_MAX, 0x10) > REG32(BLK_CFG, 0x14) > REG32(BLK_IDX, 0x18) > REG32(BLK_LUT, 0x1c) > REG32(INT_STAT, 0x20) > + FIELD(INT_STAT, IRQ, 0, 1) > REG32(INT_CLEAR, 0x24) > + FIELD(INT_CLEAR, IRQ, 0, 1) > REG32(INT_EN, 0x28) > + FIELD(INT_EN, IRQ, 0, 1) > REG32(INT_INFO1, 0x2c) > REG32(INT_INFO2, 0x30) > REG32(INT_SET, 0x34) > + FIELD(INT_SET, IRQ, 0, 1) > REG32(PIDR4, 0xfd0) > REG32(PIDR5, 0xfd4) > REG32(PIDR6, 0xfd8) > @@ -57,14 +64,55 @@ static const uint8_t tz_mpc_idregs[] = { > 0x0d, 0xf0, 0x05, 0xb1, > }; > > +static void tz_mpc_irq_update(TZMPC *s) > +{ > + qemu_set_irq(s->irq, s->int_stat && s->int_en); > +} > + > static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr, > uint64_t *pdata, > unsigned size, MemTxAttrs attrs) > { > + TZMPC *s = TZ_MPC(opaque); > uint64_t r; > uint32_t offset = addr & ~0x3; > > switch (offset) { > + case A_CTRL: > + r = s->ctrl; > + break; > + case A_BLK_MAX: > + r = s->blk_max; > + break; > + case A_BLK_CFG: > + /* We are never in "init in progress state", so this just indicates > + * the block size. s->blocksize == (1 << BLK_CFG + 5), so > + * BLK_CFG == ctz32(s->blocksize) - 5 > + */ > + r = ctz32(s->blocksize) - 5; > + break; > + case A_BLK_IDX: > + r = s->blk_idx; > + break; > + case A_BLK_LUT: > + r = s->blk_lut[s->blk_idx]; > + if (size == 4) { > + s->blk_idx++; > + s->blk_idx %= s->blk_max; > + } > + break; > + case A_INT_STAT: > + r = s->int_stat; > + break; > + case A_INT_EN: > + r = s->int_en; > + break; > + case A_INT_INFO1: > + r = s->int_info1; > + break; > + case A_INT_INFO2: > + r = s->int_info2; > + break; > case A_PIDR4: > case A_PIDR5: > case A_PIDR6: > @@ -110,6 +158,7 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr, > uint64_t value, > unsigned size, MemTxAttrs attrs) > { > + TZMPC *s = TZ_MPC(opaque); > uint32_t offset = addr & ~0x3; > > trace_tz_mpc_reg_write(addr, value, size); > @@ -122,9 +171,15 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr, > uint32_t oldval; > > switch (offset) { > - /* As we add support for registers which need expansions > - * other than zeroes we'll fill in cases here. > - */ > + case A_CTRL: > + oldval = s->ctrl; > + break; > + case A_BLK_IDX: > + oldval = s->blk_idx; > + break; > + case A_BLK_LUT: > + oldval = s->blk_lut[s->blk_idx]; > + break; > default: > oldval = 0; > break; > @@ -132,7 +187,51 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr, > value = deposit32(oldval, (addr & 3) * 8, size * 8, value); > } > > + if ((s->ctrl & R_CTRL_LOCKDOWN_MASK) && > + (offset == A_CTRL || offset == A_BLK_LUT || offset == A_INT_EN)) { > + /* Lockdown mode makes these three registers read-only, and > + * the only way out of it is to reset the device. > + */ > + qemu_log_mask(LOG_GUEST_ERROR, "TZ MPC register write to offset 0x%x " > + "while MPC is in lockdown mode\n", offset); > + return MEMTX_OK; > + } > + > switch (offset) { > + case A_CTRL: > + /* We don't implement the 'data gating' feature so all other bits > + * are reserved and we make them RAZ/WI. > + */ > + s->ctrl = value & (R_CTRL_SEC_RESP_MASK | > + R_CTRL_AUTOINC_MASK | > + R_CTRL_LOCKDOWN_MASK); > + break; > + case A_BLK_IDX: > + s->blk_idx = value % s->blk_max; > + break; > + case A_BLK_LUT: > + s->blk_lut[s->blk_idx] = value; > + if (size == 4) { > + s->blk_idx++; > + s->blk_idx %= s->blk_max; > + } > + break; > + case A_INT_CLEAR: > + if (value & R_INT_CLEAR_IRQ_MASK) { > + s->int_stat = 0; > + tz_mpc_irq_update(s); > + } > + break; > + case A_INT_EN: > + s->int_en = value & R_INT_EN_IRQ_MASK; > + tz_mpc_irq_update(s); > + break; > + case A_INT_SET: > + if (value & R_INT_SET_IRQ_MASK) { > + s->int_stat = R_INT_STAT_IRQ_MASK; > + tz_mpc_irq_update(s); > + } > + break; > case A_PIDR4: > case A_PIDR5: > case A_PIDR6: > @@ -248,6 +347,16 @@ static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu) > > static void tz_mpc_reset(DeviceState *dev) > { > + TZMPC *s = TZ_MPC(dev); > + > + s->ctrl = 0; According to the spec the reset for CTRL is 0x100 > + s->blk_idx = 0; > + s->int_stat = 0; > + s->int_en = 0; the reset for INT_EN is 0x1 > + s->int_info1 = 0; > + s->int_info2 = 0; > + > + memset(s->blk_lut, 0, s->blk_max * sizeof(uint32_t)); > } > > static void tz_mpc_init(Object *obj) > @@ -321,13 +430,35 @@ static void tz_mpc_realize(DeviceState *dev, Error **errp) > "tz-mpc-downstream"); > address_space_init(&s->blocked_io_as, &s->blocked_io, > "tz-mpc-blocked-io"); > + > + s->blk_lut = g_new(uint32_t, s->blk_max); > +} > + > +static int tz_mpc_post_load(void *opaque, int version_id) > +{ > + TZMPC *s = TZ_MPC(opaque); > + > + /* Check the incoming data doesn't point blk_idx off the end of blk_lut. */ > + if (s->blk_idx >= s->blk_max) { > + return -1; > + } > + return 0; > } > > static const VMStateDescription tz_mpc_vmstate = { > .name = "tz-mpc", > .version_id = 1, > .minimum_version_id = 1, > + .post_load = tz_mpc_post_load, > .fields = (VMStateField[]) { > + VMSTATE_UINT32(ctrl, TZMPC), > + VMSTATE_UINT32(blk_idx, TZMPC), > + VMSTATE_UINT32(int_stat, TZMPC), > + VMSTATE_UINT32(int_en, TZMPC), > + VMSTATE_UINT32(int_info1, TZMPC), > + VMSTATE_UINT32(int_info2, TZMPC), > + VMSTATE_VARRAY_UINT32(blk_lut, TZMPC, blk_max, > + 0, vmstate_info_uint32, uint32_t), > VMSTATE_END_OF_LIST() > } > }; -- Alex Bennée
diff --git a/include/hw/misc/tz-mpc.h b/include/hw/misc/tz-mpc.h index b5eaf1699e..1fff4d6029 100644 --- a/include/hw/misc/tz-mpc.h +++ b/include/hw/misc/tz-mpc.h @@ -48,6 +48,16 @@ struct TZMPC { /*< public >*/ + /* State */ + uint32_t ctrl; + uint32_t blk_idx; + uint32_t int_stat; + uint32_t int_en; + uint32_t int_info1; + uint32_t int_info2; + + uint32_t *blk_lut; + qemu_irq irq; /* Properties */ diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c index d4467ccc3b..93453cbef2 100644 --- a/hw/misc/tz-mpc.c +++ b/hw/misc/tz-mpc.c @@ -28,16 +28,23 @@ enum { /* Config registers */ REG32(CTRL, 0x00) + FIELD(CTRL, SEC_RESP, 4, 1) + FIELD(CTRL, AUTOINC, 8, 1) + FIELD(CTRL, LOCKDOWN, 31, 1) REG32(BLK_MAX, 0x10) REG32(BLK_CFG, 0x14) REG32(BLK_IDX, 0x18) REG32(BLK_LUT, 0x1c) REG32(INT_STAT, 0x20) + FIELD(INT_STAT, IRQ, 0, 1) REG32(INT_CLEAR, 0x24) + FIELD(INT_CLEAR, IRQ, 0, 1) REG32(INT_EN, 0x28) + FIELD(INT_EN, IRQ, 0, 1) REG32(INT_INFO1, 0x2c) REG32(INT_INFO2, 0x30) REG32(INT_SET, 0x34) + FIELD(INT_SET, IRQ, 0, 1) REG32(PIDR4, 0xfd0) REG32(PIDR5, 0xfd4) REG32(PIDR6, 0xfd8) @@ -57,14 +64,55 @@ static const uint8_t tz_mpc_idregs[] = { 0x0d, 0xf0, 0x05, 0xb1, }; +static void tz_mpc_irq_update(TZMPC *s) +{ + qemu_set_irq(s->irq, s->int_stat && s->int_en); +} + static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { + TZMPC *s = TZ_MPC(opaque); uint64_t r; uint32_t offset = addr & ~0x3; switch (offset) { + case A_CTRL: + r = s->ctrl; + break; + case A_BLK_MAX: + r = s->blk_max; + break; + case A_BLK_CFG: + /* We are never in "init in progress state", so this just indicates + * the block size. s->blocksize == (1 << BLK_CFG + 5), so + * BLK_CFG == ctz32(s->blocksize) - 5 + */ + r = ctz32(s->blocksize) - 5; + break; + case A_BLK_IDX: + r = s->blk_idx; + break; + case A_BLK_LUT: + r = s->blk_lut[s->blk_idx]; + if (size == 4) { + s->blk_idx++; + s->blk_idx %= s->blk_max; + } + break; + case A_INT_STAT: + r = s->int_stat; + break; + case A_INT_EN: + r = s->int_en; + break; + case A_INT_INFO1: + r = s->int_info1; + break; + case A_INT_INFO2: + r = s->int_info2; + break; case A_PIDR4: case A_PIDR5: case A_PIDR6: @@ -110,6 +158,7 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + TZMPC *s = TZ_MPC(opaque); uint32_t offset = addr & ~0x3; trace_tz_mpc_reg_write(addr, value, size); @@ -122,9 +171,15 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr, uint32_t oldval; switch (offset) { - /* As we add support for registers which need expansions - * other than zeroes we'll fill in cases here. - */ + case A_CTRL: + oldval = s->ctrl; + break; + case A_BLK_IDX: + oldval = s->blk_idx; + break; + case A_BLK_LUT: + oldval = s->blk_lut[s->blk_idx]; + break; default: oldval = 0; break; @@ -132,7 +187,51 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr, value = deposit32(oldval, (addr & 3) * 8, size * 8, value); } + if ((s->ctrl & R_CTRL_LOCKDOWN_MASK) && + (offset == A_CTRL || offset == A_BLK_LUT || offset == A_INT_EN)) { + /* Lockdown mode makes these three registers read-only, and + * the only way out of it is to reset the device. + */ + qemu_log_mask(LOG_GUEST_ERROR, "TZ MPC register write to offset 0x%x " + "while MPC is in lockdown mode\n", offset); + return MEMTX_OK; + } + switch (offset) { + case A_CTRL: + /* We don't implement the 'data gating' feature so all other bits + * are reserved and we make them RAZ/WI. + */ + s->ctrl = value & (R_CTRL_SEC_RESP_MASK | + R_CTRL_AUTOINC_MASK | + R_CTRL_LOCKDOWN_MASK); + break; + case A_BLK_IDX: + s->blk_idx = value % s->blk_max; + break; + case A_BLK_LUT: + s->blk_lut[s->blk_idx] = value; + if (size == 4) { + s->blk_idx++; + s->blk_idx %= s->blk_max; + } + break; + case A_INT_CLEAR: + if (value & R_INT_CLEAR_IRQ_MASK) { + s->int_stat = 0; + tz_mpc_irq_update(s); + } + break; + case A_INT_EN: + s->int_en = value & R_INT_EN_IRQ_MASK; + tz_mpc_irq_update(s); + break; + case A_INT_SET: + if (value & R_INT_SET_IRQ_MASK) { + s->int_stat = R_INT_STAT_IRQ_MASK; + tz_mpc_irq_update(s); + } + break; case A_PIDR4: case A_PIDR5: case A_PIDR6: @@ -248,6 +347,16 @@ static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu) static void tz_mpc_reset(DeviceState *dev) { + TZMPC *s = TZ_MPC(dev); + + s->ctrl = 0; + s->blk_idx = 0; + s->int_stat = 0; + s->int_en = 0; + s->int_info1 = 0; + s->int_info2 = 0; + + memset(s->blk_lut, 0, s->blk_max * sizeof(uint32_t)); } static void tz_mpc_init(Object *obj) @@ -321,13 +430,35 @@ static void tz_mpc_realize(DeviceState *dev, Error **errp) "tz-mpc-downstream"); address_space_init(&s->blocked_io_as, &s->blocked_io, "tz-mpc-blocked-io"); + + s->blk_lut = g_new(uint32_t, s->blk_max); +} + +static int tz_mpc_post_load(void *opaque, int version_id) +{ + TZMPC *s = TZ_MPC(opaque); + + /* Check the incoming data doesn't point blk_idx off the end of blk_lut. */ + if (s->blk_idx >= s->blk_max) { + return -1; + } + return 0; } static const VMStateDescription tz_mpc_vmstate = { .name = "tz-mpc", .version_id = 1, .minimum_version_id = 1, + .post_load = tz_mpc_post_load, .fields = (VMStateField[]) { + VMSTATE_UINT32(ctrl, TZMPC), + VMSTATE_UINT32(blk_idx, TZMPC), + VMSTATE_UINT32(int_stat, TZMPC), + VMSTATE_UINT32(int_en, TZMPC), + VMSTATE_UINT32(int_info1, TZMPC), + VMSTATE_UINT32(int_info2, TZMPC), + VMSTATE_VARRAY_UINT32(blk_lut, TZMPC, blk_max, + 0, vmstate_info_uint32, uint32_t), VMSTATE_END_OF_LIST() } };
Implement the missing registers for the TZ MPC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/tz-mpc.h | 10 +++ hw/misc/tz-mpc.c | 137 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 144 insertions(+), 3 deletions(-)