@@ -2537,11 +2537,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
wl12xx_get_vif_count(hw, vif, &vif_count);
mutex_lock(&wl->mutex);
- ret = pm_runtime_get_sync(wl->dev);
- if (ret < 0) {
- pm_runtime_put_noidle(wl->dev);
- goto out_unlock;
- }
/*
* in some very corner case HW recovery scenarios its possible to
@@ -2570,14 +2565,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
if (ret < 0)
goto out;
- if (wl12xx_need_fw_change(wl, vif_count, true)) {
- wl12xx_force_active_psm(wl);
- set_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags);
- mutex_unlock(&wl->mutex);
- wl1271_recovery_work(&wl->recovery_work);
- return 0;
- }
-
/*
* TODO: after the nvs issue will be solved, move this block
* to start(), and make sure here the driver is ON.
@@ -2594,6 +2581,24 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
goto out;
}
+ /*
+ * Call runtime PM only after possible wl12xx_init_fw() above
+ * is done. Otherwise we do not have interrupts enabled.
+ */
+ ret = pm_runtime_get_sync(wl->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(wl->dev);
+ goto out_unlock;
+ }
+
+ if (wl12xx_need_fw_change(wl, vif_count, true)) {
+ wl12xx_force_active_psm(wl);
+ set_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags);
+ mutex_unlock(&wl->mutex);
+ wl1271_recovery_work(&wl->recovery_work);
+ return 0;
+ }
+
if (!wlcore_is_p2p_mgmt(wlvif)) {
ret = wl12xx_cmd_role_enable(wl, vif->addr,
role_type, &wlvif->role_id);
We have wl12xx_boot() call wl12xx_enable_interrupts() and if we have wl1271_op_add_interface() call pm_runtime_get_sync() before the interrupts are enabled. And then we get the following error during boot: wlcore: ERROR ELP wakeup timeout! Let's fix this by first checking if we need to boot the firmware. And only after that call pm_runtime_get_sync() when interrupts are enabled. And only after that do the check for wl12xx_need_fw_change(). Signed-off-by: Tony Lindgren <tony@atomide.com> --- Here's one more patch to test for this series. --- drivers/net/wireless/ti/wlcore/main.c | 31 ++++++++++++++++----------- 1 file changed, 18 insertions(+), 13 deletions(-)