| Message ID | 20180604165943.31381-4-radu.pirea@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Radu, Some few feedback in a hope to help you. Missatge de Radu Pirea <radu.pirea@microchip.com> del dia dl., 4 de juny 2018 a les 19:03: > > This mfd driver is just a wrapper over atmel_serial driver and > spi-at91-usart driver. Selection of one of the drivers is based on a > property from device tree. If the property is not specified, the default > driver is atmel_serial. > > Signed-off-by: Radu Pirea <radu.pirea@microchip.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > drivers/mfd/Kconfig | 9 ++++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/at91-usart.c | 67 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 77 insertions(+) > create mode 100644 drivers/mfd/at91-usart.c > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index b860eb5aa194..a886672b960d 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -99,6 +99,15 @@ config MFD_AAT2870_CORE > additional drivers must be enabled in order to use the > functionality of the device. > > +config MFD_AT91_USART > + tristate "AT91 USART Driver" > + select MFD_CORE > + help > + Select this to get support for AT91 USART IP. This is a wrapper > + over at91-usart-serial driver and usart-spi-driver. Only one function > + can be used at a time. The choice is done at boot time by the probe > + function of this MFD driver according to a device tree property. > + > config MFD_ATMEL_FLEXCOM > tristate "Atmel Flexcom (Flexible Serial Communication Unit)" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index d9d2cf0d32ef..db1332aa96db 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o > obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o > obj-$(CONFIG_MFD_TPS65090) += tps65090.o > obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o > +obj-$(CONFIG_MFD_AT91_USART) += at91-usart.o > obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o > obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o > obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o > diff --git a/drivers/mfd/at91-usart.c b/drivers/mfd/at91-usart.c > new file mode 100644 > index 000000000000..262e7affba22 > --- /dev/null > +++ b/drivers/mfd/at91-usart.c > @@ -0,0 +1,67 @@ > +// SPDX-License-Identifier: GPL-2.0+ This means GPL-2.0 or later ... > +/* > + * Driver for AT91 USART > + * > + * Copyright (C) 2018 Microchip Technology > + * > + * Author: Radu Pirea <radu.pirea@microchip.com> > + * > + */ > + > +#include <dt-bindings/mfd/at91-usart.h> > + > +#include <linux/module.h> > +#include <linux/mfd/core.h> > +#include <linux/property.h> > + > +static struct mfd_cell at91_usart_spi_subdev = { > + .name = "at91_usart_spi", > + .of_compatible = "microchip,at91sam9g45-usart-spi", > + }; > + > +static struct mfd_cell at91_usart_serial_subdev = { > + .name = "atmel_usart_serial", > + .of_compatible = "atmel,at91rm9200-usart-serial", > + }; > + > +static int at91_usart_mode_probe(struct platform_device *pdev) > +{ > + struct mfd_cell cell; > + u32 opmode; > + int err; > + > + err = device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode); > + The returned value is not checked (and probably has no sense to check), so I think you can just remove the err variable. > + switch (opmode) { > + case AT91_USART_MODE_SPI: > + cell = at91_usart_spi_subdev; > + break; > + case AT91_USART_MODE_SERIAL: > + default: > + cell = at91_usart_serial_subdev; > + } > + > + return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1, > + NULL, 0, NULL); > +} > + > +static const struct of_device_id at91_usart_mode_of_match[] = { > + { .compatible = "atmel,at91rm9200-usart" }, > + { .compatible = "atmel,at91sam9260-usart" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, at91_flexcom_of_match); > + > +static struct platform_driver at91_usart_mfd = { > + .probe = at91_usart_mode_probe, > + .driver = { > + .name = "at91_usart_mode", > + .of_match_table = at91_usart_mode_of_match, > + }, > +}; > + > +module_platform_driver(at91_usart_mfd); > + > +MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>"); > +MODULE_DESCRIPTION("AT91 USART MFD driver"); > +MODULE_LICENSE("GPL v2"); And this means GPL-2.0-only, so there is a mismatch. The SPDX identifier should be GPL-2.0 or the module license should be GPL. > -- > 2.17.1 > Cheers, Enric -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b860eb5aa194..a886672b960d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -99,6 +99,15 @@ config MFD_AAT2870_CORE additional drivers must be enabled in order to use the functionality of the device. +config MFD_AT91_USART + tristate "AT91 USART Driver" + select MFD_CORE + help + Select this to get support for AT91 USART IP. This is a wrapper + over at91-usart-serial driver and usart-spi-driver. Only one function + can be used at a time. The choice is done at boot time by the probe + function of this MFD driver according to a device tree property. + config MFD_ATMEL_FLEXCOM tristate "Atmel Flexcom (Flexible Serial Communication Unit)" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index d9d2cf0d32ef..db1332aa96db 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o +obj-$(CONFIG_MFD_AT91_USART) += at91-usart.o obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o diff --git a/drivers/mfd/at91-usart.c b/drivers/mfd/at91-usart.c new file mode 100644 index 000000000000..262e7affba22 --- /dev/null +++ b/drivers/mfd/at91-usart.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for AT91 USART + * + * Copyright (C) 2018 Microchip Technology + * + * Author: Radu Pirea <radu.pirea@microchip.com> + * + */ + +#include <dt-bindings/mfd/at91-usart.h> + +#include <linux/module.h> +#include <linux/mfd/core.h> +#include <linux/property.h> + +static struct mfd_cell at91_usart_spi_subdev = { + .name = "at91_usart_spi", + .of_compatible = "microchip,at91sam9g45-usart-spi", + }; + +static struct mfd_cell at91_usart_serial_subdev = { + .name = "atmel_usart_serial", + .of_compatible = "atmel,at91rm9200-usart-serial", + }; + +static int at91_usart_mode_probe(struct platform_device *pdev) +{ + struct mfd_cell cell; + u32 opmode; + int err; + + err = device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode); + + switch (opmode) { + case AT91_USART_MODE_SPI: + cell = at91_usart_spi_subdev; + break; + case AT91_USART_MODE_SERIAL: + default: + cell = at91_usart_serial_subdev; + } + + return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1, + NULL, 0, NULL); +} + +static const struct of_device_id at91_usart_mode_of_match[] = { + { .compatible = "atmel,at91rm9200-usart" }, + { .compatible = "atmel,at91sam9260-usart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, at91_flexcom_of_match); + +static struct platform_driver at91_usart_mfd = { + .probe = at91_usart_mode_probe, + .driver = { + .name = "at91_usart_mode", + .of_match_table = at91_usart_mode_of_match, + }, +}; + +module_platform_driver(at91_usart_mfd); + +MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>"); +MODULE_DESCRIPTION("AT91 USART MFD driver"); +MODULE_LICENSE("GPL v2");