diff mbox

[1/5] dt-bindings: power: reset: Add qcom pon binding

Message ID 20180618143548.29900-2-vkoul@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Vinod Koul June 18, 2018, 2:35 p.m. UTC
The Power On driver for Qcom PM 8xxx is a MFD supporting pwrkey and
resin along with the Android reboot-mode.
Add the binding describing this.

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../devicetree/bindings/power/reset/qcom,pon.txt   | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt

Comments

Bjorn Andersson June 22, 2018, 8:58 p.m. UTC | #1
On Mon 18 Jun 07:35 PDT 2018, Vinod Koul wrote:

> The Power On driver for Qcom PM 8xxx is a MFD supporting pwrkey and
> resin along with the Android reboot-mode.
> Add the binding describing this.
> 
> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  .../devicetree/bindings/power/reset/qcom,pon.txt   | 47 ++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> new file mode 100644
> index 000000000000..d923835425c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> @@ -0,0 +1,47 @@
> +Qualcomm PON Driver
> +
> +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and
> +resin along with the Android reboot-mode.
> +
> +This DT node has pwrkey and resin as sub nodes.
> +
> +Required Properties:
> +-compatible: "qcom,pm8916-pon"
> +-reg: Specifies the physical address of the pon register
> +
> +Optional property:

Better call these "Optional subnodes".

> +-prwrkey: Specifies the subnode pwrkey and should follow the
> + qcom,pm8xxx-pwrkey.txt description.
> +-resin: Specifies the subnode resin and should follow the
> + qcom,pm8xxx-pwrkey.txt description.
> +
> +The rest of the properties should follow the generic reboot-mode description
> +found in reboot-mode.txt
> +
> +Example:
> +
> +	pon@800 {
> +		compatible = "qcom,pm8916-pon";
> +
> +		reg = <0x800>;
> +		mode-bootloader = <0x2>;
> +		mode-recovery = <0x1>;
> +
> +		pwrkey {
> +			compatible = "qcom,pm8941-pwrkey";
> +			reg = <0x800>;

Didn't we conclude that you could drop the "reg" of the children?

Apart from that this looks good.

Regards,
Bjorn

> +			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> +			debounce = <15625>;
> +			bias-pull-up;
> +			linux,code = <KEY_POWER>;
> +		};
> +
> +		resin {
> +			compatible = "qcom,pm8941-resin";
> +			reg = <0x800>;
> +			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> +			debounce = <15625>;
> +			bias-pull-up;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +		};
> +	};
> -- 
> 2.14.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Vinod Koul June 23, 2018, 4:29 a.m. UTC | #2
On 22-06-18, 13:58, Bjorn Andersson wrote:
> On Mon 18 Jun 07:35 PDT 2018, Vinod Koul wrote:
> 
> > +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and
> > +resin along with the Android reboot-mode.
> > +
> > +This DT node has pwrkey and resin as sub nodes.
> > +
> > +Required Properties:
> > +-compatible: "qcom,pm8916-pon"
> > +-reg: Specifies the physical address of the pon register
> > +
> > +Optional property:
> 
> Better call these "Optional subnodes".

Yes will do..

> > +-prwrkey: Specifies the subnode pwrkey and should follow the
> > + qcom,pm8xxx-pwrkey.txt description.
> > +-resin: Specifies the subnode resin and should follow the
> > + qcom,pm8xxx-pwrkey.txt description.
> > +
> > +The rest of the properties should follow the generic reboot-mode description
> > +found in reboot-mode.txt
> > +
> > +Example:
> > +
> > +	pon@800 {
> > +		compatible = "qcom,pm8916-pon";
> > +
> > +		reg = <0x800>;
> > +		mode-bootloader = <0x2>;
> > +		mode-recovery = <0x1>;
> > +
> > +		pwrkey {
> > +			compatible = "qcom,pm8941-pwrkey";
> > +			reg = <0x800>;
> 
> Didn't we conclude that you could drop the "reg" of the children?

Sloppy me, fixed the code & DTS but not the binding, thanks for pointing

> Apart from that this looks good.

Thanks :)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
new file mode 100644
index 000000000000..d923835425c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -0,0 +1,47 @@ 
+Qualcomm PON Driver
+
+The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and
+resin along with the Android reboot-mode.
+
+This DT node has pwrkey and resin as sub nodes.
+
+Required Properties:
+-compatible: "qcom,pm8916-pon"
+-reg: Specifies the physical address of the pon register
+
+Optional property:
+-prwrkey: Specifies the subnode pwrkey and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
+-resin: Specifies the subnode resin and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+
+	pon@800 {
+		compatible = "qcom,pm8916-pon";
+
+		reg = <0x800>;
+		mode-bootloader = <0x2>;
+		mode-recovery = <0x1>;
+
+		pwrkey {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_POWER>;
+		};
+
+		resin {
+			compatible = "qcom,pm8941-resin";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};