@@ -13,6 +13,19 @@ The dependencies are minimal, but make sure you have them installed:
- GNU awk
- util-linux
- fio
+- gcc
+- make
+- multipath-tools (Debian, openSUSE) or device-mapper-multipath (Fedora)
+- dmsetup (Debian) or device-mapper (Fedora, openSUSE, Arch Linux)
+- e2fsprogs and xfsprogs
+
+For the SRP tests, tell multipathd to use the SRP multipath configuration
+file:
+
+```pushd /etc
+ln -s ${BLKTESTS_PATH}/tests/srp/multipath.conf
+popd
+```
Add the list of block devices you want to test on in a file named `config`:
@@ -94,6 +94,23 @@ _have_configfs() {
return 0
}
+_have_kernel_option() {
+ local f opt=$1
+
+ SKIP_REASON="Kernel $(uname -r) config not found"
+ for f in /proc/config.gz /boot/config-$(uname -r); do
+ [ -e "$f" ] || continue
+ if zgrep -q "^CONFIG_${opt}=[my]$" "$f"; then
+ SKIP_REASON=""
+ return 0
+ else
+ SKIP_REASON="Kernel option $opt has not been enabled"
+ fi
+ done
+
+ return 1
+}
+
_have_tracefs() {
stat /sys/kernel/debug/tracing/trace > /dev/null 2>&1
if ! findmnt -t tracefs /sys/kernel/debug/tracing >/dev/null; then
new file mode 100755
@@ -0,0 +1,73 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Create and remove LUNs"
+QUICK=1
+
+# Count the number of LUNs created by start_srpt() from the initiator side.
+count_srp_luns() {
+ local h luns=0 p
+
+ for p in /sys/class/srp_remote_ports/*; do
+ [ -e "$p" ] || continue
+ h="${p##*/}"; h="${h#port-}"; h="${h%:1}";
+ for d in "/sys/class/scsi_device/${h}:"*; do
+ [ -e "$d" ] && ((luns++))
+ done
+ [ "$luns" -gt 0 ] && break
+ done
+ echo $luns
+}
+
+count_nvme_devs() {
+ local d devs=0
+
+ for d in /sys/class/nvme-fabrics/ctl/*/*/device; do
+ [ -d "$d" ] && ((devs++))
+ done
+ echo $devs
+}
+
+count_luns() {
+ if [ -n "$nvme" ]; then
+ count_nvme_devs
+ else
+ count_srp_luns
+ fi
+}
+
+wait_for_luns() {
+ local i luns
+
+ use_blk_mq y y || return $?
+ for ((i=0;i<100;i++)); do
+ luns=$(count_luns)
+ [ "$luns" -ge ${#vdev_path[@]} ] && break
+ sleep .1
+ done
+ echo "count_luns(): $luns <> ${#vdev_path[@]}" >>"$FULL"
+ echo "count_luns(): $luns <> ${#vdev_path[@]}"
+ [ "$luns" -ge ${#vdev_path[@]} ]
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && wait_for_luns && echo Passed
+}
new file mode 100644
@@ -0,0 +1,3 @@
+Configured SRP target driver
+count_luns(): 3 <> 3
+Passed
new file mode 100755
@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="File I/O on top of multipath concurrently with logout and login (mq)"
+TIMED=1
+
+test_disconnect_repeatedly() {
+ local dev fio_status m
+
+ use_blk_mq y y || return $?
+ dev=$(get_bdev 0) || return $?
+ m=$(mountpoint 0) || return $?
+ create_filesystem "$dev" || return $?
+ mount_and_check "$dev" "$m" || return $?
+ # shellcheck disable=SC2064
+ trap "unmount_and_check $m" RETURN
+ simulate_network_failure_loop "$dev" "$TIMEOUT" &
+ run_fio --verify=md5 --rw=randwrite --bs=4K --loops=$((10**6)) \
+ --iodepth=64 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio --directory="$m" --runtime="${TIMEOUT}" \
+ --name=data-integrity-test-mq --thread --numjobs=16 \
+ --output="${RESULTS_DIR}/srp/fio-output-002.txt" \
+ >>"$FULL"
+ fio_status=$?
+ wait
+ [ -z "$nvme" ] && log_in
+ return $fio_status
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_disconnect_repeatedly && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="File I/O on top of multipath concurrently with logout and login (sq)"
+TIMED=1
+
+test_disconnect_repeatedly() {
+ local dev fio_status m
+
+ use_blk_mq n n || return $?
+ dev=$(get_bdev 0) || return $?
+ m=$(mountpoint 0) || return $?
+ create_filesystem "$dev" || return $?
+ mount_and_check "$dev" "$m" || return $?
+ # shellcheck disable=SC2064
+ trap "unmount_and_check $m" RETURN
+ simulate_network_failure_loop "$dev" "$TIMEOUT" &
+ run_fio --verify=md5 --rw=randwrite --bs=4K --loops=$((10**6)) \
+ --iodepth=64 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio --directory="$m" --runtime="${TIMEOUT}" \
+ --name=data-integrity-test-sq --thread --numjobs=16 \
+ --output="${RESULTS_DIR}/srp/fio-output-003.txt" \
+ >>"$FULL"
+ fio_status=$?
+ wait
+ [ -z "$nvme" ] && log_in
+ return $fio_status
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_disconnect_repeatedly && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="File I/O on top of multipath concurrently with logout and login (sq-on-mq)"
+TIMED=1
+
+test_disconnect_repeatedly() {
+ local dev fio_status m
+
+ use_blk_mq n y || return $?
+ dev=$(get_bdev 0) || return $?
+ m=$(mountpoint 0) || return $?
+ create_filesystem "$dev" || return $?
+ mount_and_check "$dev" "$m" || return $?
+ # shellcheck disable=SC2064
+ trap "unmount_and_check $m" RETURN
+ simulate_network_failure_loop "$dev" "$TIMEOUT" &
+ run_fio --verify=md5 --rw=randwrite --bs=4K --loops=$((10**6)) \
+ --iodepth=64 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio --directory="$m" \
+ --name=data-integrity-test-02-sq-on-mq --thread \
+ --numjobs=16 --runtime="${TIMEOUT}" \
+ --output="${RESULTS_DIR}/srp/fio-output-004.txt" >>"$FULL"
+ fio_status=$?
+ wait
+ [ -z "$nvme" ] && log_in
+ return $fio_status
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_disconnect_repeatedly && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Direct I/O with large transfer sizes, cmd_sg_entries=255 and bs=4M"
+QUICK=1
+
+test_large_transfer_size() {
+ local dev m
+
+ srp_login_params+=ch_count=1,queue_size=32,max_cmd_per_lun=32,max_sect=$((1<<17))
+ use_blk_mq y y cmd_sg_entries=255 || return $?
+ dev=$(get_bdev 0) || return $?
+ run_fio --verify=md5 --rw=randwrite --bs=4M --loops=$((10**6)) \
+ --iodepth=4 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio \
+ --filename="$dev" --name=large-io-test --thread --numjobs=1 \
+ --runtime=10 --output="${RESULTS_DIR}/srp/fio-output-005.txt" \
+ >>"$FULL"
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_large_transfer_size && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Direct I/O with large transfer sizes, cmd_sg_entries=255 and bs=8M"
+QUICK=1
+
+test_large_transfer_size() {
+ local dev m
+
+ srp_login_params+=ch_count=1,queue_size=32,max_cmd_per_lun=32,max_sect=$((1<<17))
+ use_blk_mq y y cmd_sg_entries=255 || return $?
+ dev=$(get_bdev 0) || return $?
+ run_fio --verify=md5 --rw=randwrite --bs=8M --loops=$((10**6)) \
+ --iodepth=4 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio \
+ --filename="$dev" --name=large-io-test --thread --numjobs=1 \
+ --runtime=10 --output="${RESULTS_DIR}/srp/fio-output-006.txt" \
+ >>"$FULL"
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_large_transfer_size && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Direct I/O with large transfer sizes, cmd_sg_entries=1 and bs=4M"
+QUICK=1
+
+test_low_sg_size() {
+ local dev m
+
+ srp_login_params+=ch_count=1
+ use_blk_mq y y "cmd_sg_entries=1" || return $?
+ dev=$(get_bdev 0) || return $?
+ run_fio --verify=md5 --rw=randwrite --bs=4M --loops=$((10**6)) \
+ --iodepth=4 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio \
+ --filename="$dev" --name=low-sg-test --thread --numjobs=1 \
+ --size=${ramdisk_size} --runtime=10 \
+ --output="${RESULTS_DIR}/srp/fio-output-007.txt" >>"$FULL"
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_low_sg_size && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,40 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Direct I/O with large transfer sizes, cmd_sg_entries=1 and bs=8M"
+QUICK=1
+
+test_low_sg_size() {
+ local dev m
+
+ srp_login_params+=ch_count=1
+ use_blk_mq y y "cmd_sg_entries=1" || return $?
+ dev=$(get_bdev 0) || return $?
+ run_fio --verify=md5 --rw=randwrite --bs=8M --loops=$((10**6)) \
+ --iodepth=4 --group_reporting --sync=1 --direct=1 \
+ --ioengine=libaio --size=${ramdisk_size} --runtime=10 \
+ --filename="$dev" --name=low-sg-test --thread --numjobs=1 \
+ --output="${RESULTS_DIR}/srp/fio-output-008.txt" >>"$FULL"
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_low_sg_size && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Buffered I/O with large transfer sizes, cmd_sg_entries=255 and bs=4M"
+QUICK=1
+
+test_large_transfer_size() {
+ local dev m
+
+ srp_login_params+=ch_count=1,queue_size=32,max_cmd_per_lun=32,max_sect=$((1<<17))
+ use_blk_mq y y cmd_sg_entries=255 || return $?
+ dev=$(get_bdev 0) || return $?
+ run_fio --verify=md5 --rw=randwrite --bs=4M --loops=$((10**6)) \
+ --iodepth=4 --group_reporting --sync=1 --direct=0 \
+ --ioengine=libaio \
+ --filename="$dev" --name=large-io-test --thread --numjobs=1 \
+ --runtime=10 --output="${RESULTS_DIR}/srp/fio-output-009.txt" \
+ >>"$FULL"
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_large_transfer_size && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Buffered I/O with large transfer sizes, cmd_sg_entries=255 and bs=8M"
+QUICK=1
+
+test_large_transfer_size() {
+ local dev m
+
+ srp_login_params+=ch_count=1,queue_size=32,max_cmd_per_lun=32,max_sect=$((1<<17))
+ use_blk_mq y y cmd_sg_entries=255 || return $?
+ dev=$(get_bdev 0) || return $?
+ run_fio --verify=md5 --rw=randwrite --bs=8M --loops=$((10**6)) \
+ --iodepth=4 --group_reporting --sync=1 --direct=0 \
+ --ioengine=libaio \
+ --filename="$dev" --name=large-io-test --thread --numjobs=1 \
+ --runtime=10 --output="${RESULTS_DIR}/srp/fio-output-010.txt" \
+ >>"$FULL"
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_large_transfer_size && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,46 @@
+#!/bin/bash
+#
+# Copyright (c) 2016-2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Block I/O on top of multipath concurrently with logout and login"
+TIMED=1
+
+test_disconnect_repeatedly() {
+ local dev fio_status m
+
+ use_blk_mq y y || return $?
+ dev=$(get_bdev 0) || return $?
+ simulate_network_failure_loop "$dev" "$TIMEOUT" &
+ run_fio --verify=md5 --rw=randwrite --bs=4K --loops=10000 \
+ --ioengine=libaio --iodepth=64 --iodepth_batch=32 \
+ --group_reporting --sync=1 --direct=1 --filename="$dev" \
+ --name=data-integrity-test-06 --thread --numjobs=1 \
+ --runtime="${TIMEOUT}" \
+ --output="${RESULTS_DIR}/srp/fio-output-011.txt" \
+ >>"$FULL"
+ fio_status=$?
+ wait
+ [ -z "$nvme" ] && log_in
+ return $fio_status
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_disconnect_repeatedly && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,53 @@
+#!/bin/bash
+#
+# Copyright (c) 2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="dm-mpath on top of multiple I/O schedulers"
+QUICK=1
+
+test_io_schedulers() {
+ local dev m
+
+ # Load all I/O scheduler kernel modules
+ for m in "/lib/modules/$(uname -r)/kernel/block/"*.ko; do
+ modprobe "$(basename "$m")" >&/dev/null
+ done
+ for mq in y n; do
+ use_blk_mq ${mq} ${mq} || return $?
+ dev=$(get_bdev 0) || return $?
+ for sched in noop deadline bfq cfq; do
+ set_scheduler "$(basename "$(readlink -f "${dev}")")" $sched \
+ >>"$FULL" 2>&1 || continue
+ echo "I/O scheduler: $sched; use_blk_mq: $mq" >>"$FULL"
+ run_fio --verify=md5 --rw=randwrite --bs=4K --size=64K \
+ --ioengine=libaio --iodepth=64 \
+ --iodepth_batch=32 --group_reporting --sync=1 \
+ --direct=1 --filename="$dev" \
+ --name=${sched} --thread --numjobs=1 \
+ --output="${RESULTS_DIR}/srp/012-${sched}-${mq}.txt" \
+ >>"$FULL" ||
+ return $?
+ done
+ done
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && test_io_schedulers && echo Passed
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Configured SRP target driver
+Passed
new file mode 100755
@@ -0,0 +1,49 @@
+#!/bin/bash
+#
+# Copyright (c) 2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. tests/srp/rc
+
+DESCRIPTION="Direct I/O using a discontiguous buffer"
+QUICK=1
+
+discontiguous_io() {
+ local byte bytes dev m
+
+ use_blk_mq y y || return $?
+ dev=$(get_bdev 0) || return $?
+ dd if="${dev}" bs=512 count=1 iflag=direct status=none |
+ od -An -v -tu1 -w1 |
+ while read -r byte; do
+ # shellcheck disable=SC2059
+ printf "\\x$(printf "%x" $((byte ^ 0xa5)))"
+ done >"${TMPDIR}/data_block"
+ wc -c < "${TMPDIR}/data_block"
+ src/discontiguous-io -s -w "${dev}" <"${TMPDIR}/data_block" >>"$FULL" ||
+ return $?
+ dd if="${dev}" bs=512 count=1 iflag=direct status=none |
+ cmp - "${TMPDIR}/data_block" ||
+ return $?
+ src/discontiguous-io -s "${dev}" 2>>"$FULL" |
+ cmp - "${TMPDIR}/data_block" ||
+ return $?
+}
+
+test() {
+ trap 'trap "" EXIT; teardown' EXIT
+ setup && discontiguous_io && echo Passed
+}
new file mode 100644
@@ -0,0 +1,3 @@
+Configured SRP target driver
+512
+Passed
new file mode 100644
@@ -0,0 +1,27 @@
+defaults {
+ find_multipaths no
+ user_friendly_names yes
+ queue_without_daemon no
+}
+devices {
+ device {
+ vendor "LIO-ORG|SCST_BIO|FUSIONIO"
+ product ".*"
+ features "1 queue_if_no_path"
+ path_checker tur
+ }
+}
+blacklist {
+ device {
+ vendor "ATA|QEMU"
+ }
+ device {
+ vendor "Linux"
+ product "scsi_debug"
+ }
+ devnode "^nullb.*"
+}
+blacklist_exceptions {
+ property ".*"
+ devnode "^nvme"
+}
new file mode 100755
@@ -0,0 +1,1433 @@
+#!/bin/bash
+#
+# Copyright (c) 2018 Western Digital Corporation or its affiliates
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+
+. common/rc
+
+vdev_path=(/dev/nullb0 /dev/nullb1 scsi_debug_dev_path_will_be_set_later)
+vdevs=(iblock_0/vdev0 iblock_1/vdev1 iblock_2/vdev2)
+scsi_serial=(nullb0 nullb1 scsidbg)
+memtotal=$(sed -n 's/^MemTotal:[[:blank:]]*\([0-9]*\)[[:blank:]]*kB$/\1/p' /proc/meminfo)
+max_ramdisk_size=$((1<<25))
+ramdisk_size=$((memtotal*(1024/16))) # in bytes
+if [ $ramdisk_size -gt $max_ramdisk_size ]; then
+ ramdisk_size=$max_ramdisk_size
+fi
+debug=
+elevator=none
+filesystem_type=ext4
+fio_aux_path=/tmp/fio-state-files
+nvme=
+nvme_subsysnqn="nvme-test"
+nvme_port=7777
+scsi_timeout=1
+srp_login_params=
+srp_rdma_cm_port=5555
+
+is_lio_configured() {
+ (
+ cd /sys/kernel/config/target >&/dev/null || return 1
+ for e in target/* core/fileio* core/iblock* core/pscsi*; do
+ if [ -d "$e" ] && [ "$e" != core ]; then
+ return 0
+ fi
+ done
+ )
+
+ return 1
+}
+
+group_requires() {
+ local m name p required_modules
+
+ if [ ! -e /etc/multipath.conf ]; then
+ SKIP_REASON="Could not find /etc/multipath.conf"
+ return 1
+ fi
+ _have_configfs || return $?
+ if is_lio_configured; then
+ SKIP_REASON="LIO must be unloaded before the SRP tests are run"
+ return 1
+ fi
+ required_modules=(
+ dm_multipath
+ dm_queue_length
+ dm_service_time
+ ib_srp
+ ib_srpt
+ sd_mod
+ null_blk
+ sd_mod
+ sg
+ rdma_cm
+ ib_ipoib
+ ib_umad
+ rdma_rxe
+ scsi_debug
+ scsi_dh_alua
+ scsi_dh_emc
+ scsi_dh_rdac
+ target_core_mod
+ target_core_iblock
+ )
+ for m in "${required_modules[@]}"; do
+ _have_module "$m" || return $?
+ done
+
+ for p in mkfs.ext4 mkfs.xfs multipath multipathd pidof sg_reset; do
+ _have_program "$p" || return $?
+ done
+
+ _have_root || return $?
+
+ _have_src_program discontiguous-io || return $?
+
+ _have_kernel_option DM_UEVENT || return $?
+
+ for name in srp_daemon multipathd; do
+ if pidof "$name" >/dev/null; then
+ SKIP_REASON="$name must be stopped before the SRP tests are run"
+ return 1
+ fi
+ done
+}
+
+# Log out, set dm and SCSI use_blk_mq parameters and log in. $1: device mapper
+# use_blk_mq mode; $2: SCSI use_blk_mq mode; $3..${$#}: SRP kernel module
+# parameters.
+use_blk_mq() {
+ local dm_mode=$1 scsi_mode=$2 kmod_params
+
+ shift
+ shift
+ kmod_params=("$@")
+
+ (
+ cd /sys/module/dm_mod/parameters || return $?
+ if [ -e use_blk_mq ]; then
+ echo "$dm_mode" >use_blk_mq || return $?
+ fi
+ )
+ (
+ cd /sys/module/scsi_mod/parameters || return $?
+ echo "$scsi_mode" >use_blk_mq || return $?
+ )
+
+ log_out &&
+ remove_mpath_devs &&
+ stop_client &&
+ start_client indirect_sg_entries=2048 "${kmod_params[@]}" &&
+ log_in
+}
+
+get_ipv4_addr() {
+ ip -4 -o addr show dev "$1" |
+ sed -n 's/.*[[:blank:]]inet[[:blank:]]*\([^[:blank:]/]*\).*/\1/p'
+}
+
+# Convert e.g. ::1 into 0000:0000:0000:0000:0000:0000:0000:0001.
+expand_ipv6_addr() {
+ awk -F : 'BEGIN{left=1} { for(i=1;i<=NF;i++) { a=substr("0000", 1+length($i)) $i; if ($i == "") left=0; else if (left) pre = pre ":" a; else suf = suf ":" a }; mid=substr(":0000:0000:0000:0000:0000:0000:0000:0000", (pre!="")+length(pre)+length(suf)); print substr(pre,2) mid suf}'
+}
+
+get_ipv6_addr() {
+ ip -6 -o addr show dev "$1" |
+ sed -n 's/.*[[:blank:]]inet6[[:blank:]]*\([^[:blank:]/]*\).*/\1/p'
+}
+
+# Write SRP login string $1 into SRP login sysfs attribute $2.
+srp_single_login() {
+ {
+ echo "echo $1 > $PWD/$2"
+ echo "$1" >"$2"
+ } &>>"$FULL"
+}
+
+# Tell the SRP initiator to log in to an SRP target using the IB/CM.
+# Arguments: $1: SRP target IOC GUID; $2: IB device to log in to; $3: IB device
+# port to log in to; $4: additional login parameters.
+do_ib_cm_login() {
+ local add_param gid ibdev ioc_guid p port
+
+ ioc_guid=$1
+ ibdev=$2
+ port=$3
+ add_param=$4
+ gid=$(<"/sys/class/infiniband/$ibdev/ports/$port/gids/0")
+ gid=${gid//:}
+ for p in /sys/class/infiniband_srp/*; do
+ [ -e "$p" ] || continue
+ srp_single_login "id_ext=$ioc_guid,ioc_guid=$ioc_guid,dgid=$gid,pkey=7fff,service_id=$ioc_guid,$add_param" "$p/add_target"
+ done
+}
+
+# Tell the SRP initiator to log in to an SRP target using the RDMA/CM.
+# Arguments: $1: SRP target IOC GUID; $2: IB device to log in to; $3: additional
+# login parameters.
+do_rdma_cm_login() {
+ local a b add_param d dest dests ibdev ioc_guid pd
+
+ ioc_guid=$1
+ ibdev=$2
+ add_param=$3
+ pd=/sys/class/infiniband/$ibdev/parent
+ if [ -e "$pd" ]; then
+ d=$(<"$pd")
+ a=$(get_ipv4_addr "$(basename "$d")")
+ b=$(get_ipv6_addr "$(basename "$d")")
+ fi
+ [ -n "$a$b" ] || return 1
+ dests=()
+ [ -n "$a" ] && dests+=("${a}:${srp_rdma_cm_port}")
+ [ -n "$b" ] && dests+=("[${b}]:${srp_rdma_cm_port}")
+ for dest in "${dests[@]}"; do
+ for p in /sys/class/infiniband_srp/*; do
+ [ -e "$p" ] || continue
+ srp_single_login "id_ext=$ioc_guid,ioc_guid=$ioc_guid,dest=$dest,$add_param" "$p/add_target"
+ done
+ done
+}
+
+show_srp_connections() {
+ local d f h hd scsi_devs srp_luns p s
+
+ for p in /sys/class/scsi_host/*/orig_dgid; do
+ [ -e "$p" ] || continue
+ hd=${p%/orig_dgid}
+ h=${hd#/sys/class/scsi_host/host}
+ { s=$(<"$hd/sgid"); } 2>/dev/null
+ s=${s#fe80:0000:0000:0000:}
+ s=${s:-?}
+ d=$(<"$p")
+ d=${d#fe80:0000:0000:0000:}
+ d=${d:-?}
+ srp_luns=()
+ for f in "/sys/class/scsi_device/${h}:"*; do
+ [ -e "$f" ] || continue
+ srp_luns+=("$f")
+ done
+ scsi_devs=()
+ for dev in "/sys/class/scsi_device/${h}:"*/device/block/*; do
+ [ -e "$dev" ] || continue
+ scsi_devs+=("${dev/*\/}")
+ done
+ echo "SCSI host $h: src GUID $s dst GUID $d ${#srp_luns[@]} LUNS; scsi devs: ${scsi_devs[*]}"
+ done
+}
+
+# Make the SRP initiator driver log in to each SRP target port that exists
+# on the local host. $1 are additional SRP login parameters.
+srp_log_in() {
+ local a add_param=$1 d dest gid ibdev ioc_guid port p sysfsdir
+
+ ioc_guid=$(</sys/module/ib_srpt/parameters/srpt_service_guid)
+
+ for ((i=0;i<10;i++)); do
+ for d in /sys/class/infiniband_mad/umad*; do
+ [ -e "$d" ] || continue
+ sysfsdir=/sys/class/infiniband_mad/$(basename "$d")
+ ibdev=$(<"$sysfsdir/ibdev")
+ port=$(<"$sysfsdir/port")
+ link_layer=$(<"/sys/class/infiniband/$ibdev/ports/$port/link_layer")
+ case $link_layer in
+ InfiniBand)
+ do_ib_cm_login "$ioc_guid" "$ibdev" "$port" "$add_param" ||
+ do_rdma_cm_login "$ioc_guid" "$ibdev" "$add_param";;
+ *)
+ do_rdma_cm_login "$ioc_guid" "$ibdev" "$add_param";;
+ esac || break
+ done
+
+ for p in /sys/class/scsi_host/*/orig_dgid; do
+ if [ -e "$p" ]; then
+ show_srp_connections &>>"$FULL"
+ return 0
+ fi
+ done
+ sleep .1
+ done
+
+ echo "SRP login failed"
+
+ return 1
+}
+
+# Tell the SRP initiator driver to log out.
+srp_log_out() {
+ local p
+
+ if [ -e /sys/class/srp_remote_ports ]; then
+ for p in /sys/class/srp_remote_ports/*; do
+ [ -e "$p" ] && echo 1 >"$p/delete" &
+ done
+ fi
+ wait
+}
+
+# Whether or not $1 is a number.
+is_number() {
+ [ "$1" -eq "0$1" ] 2>/dev/null
+}
+
+# Check whether a device is an RDMA device. An example argument:
+# /sys/devices/pci0000:00/0000:00:03.0/0000:04:00.0
+is_rdma_device() {
+ local d i inode1 inode2
+
+ inode1=$(stat -c %i "$1")
+ # echo "inode1 = $inode1"
+ for i in /sys/class/infiniband/*; do
+ d=/sys/class/infiniband/"$(readlink "$i")"
+ d=$(dirname "$(dirname "$d")")
+ inode2=$(stat -c %i "$d")
+ # echo "inode2 = $inode2"
+ if [ "$inode1" = "$inode2" ]; then
+ return
+ fi
+ done
+ false
+}
+
+# Lists RDMA capable network interface names, e.g. ib0 ib1.
+rdma_network_interfaces() {
+ (
+ cd /sys/class/net &&
+ for i in *; do
+ [ -e "$i" ] || continue
+ # Skip IPoIB (ARPHRD_INFINIBAND) network
+ # interfaces.
+ [ "$(<"$i"/type)" = 32 ] && continue
+ [ -L "$i/device" ] || continue
+ d=$(readlink "$i/device" 2>/dev/null)
+ if [ -n "$d" ] && is_rdma_device "$i/$d"; then
+ echo "$i"
+ fi
+ done
+ )
+}
+
+nvme_log_in() {
+ local i ipv4_addr
+
+ [ -c /dev/nvme-fabrics ] &&
+ for i in $(rdma_network_interfaces); do
+ ipv4_addr=$(get_ipv4_addr "$i")
+ if [ -n "${ipv4_addr}" ]; then
+ echo -n "transport=rdma,traddr=${ipv4_addr},trsvcid=${nvme_port},nqn=$nvme_subsysnqn" > /dev/nvme-fabrics
+ fi
+ done &&
+ echo reconfigure | multipathd -k >&/dev/null
+}
+
+nvme_log_out() {
+ local c
+
+ for c in /sys/class/nvme-fabrics/ctl/*/delete_controller; do
+ [ -e "$c" ] && echo 1 > "$c" &
+ done
+ wait
+}
+
+# Log in.
+log_in() {
+ if [ -n "$nvme" ]; then
+ nvme_log_in
+ else
+ srp_log_in "${srp_login_params}"
+ fi
+}
+
+log_out() {
+ if [ -n "$nvme" ]; then
+ nvme_log_out
+ else
+ srp_log_out
+ fi
+}
+
+# Check whether any stacked block device holds block device $1. If so, echo
+# the name of the holder.
+held_by() {
+ local d e dev=$1
+
+ while [ -L "$dev" ]; do
+ dev=$(realpath "$dev")
+ done
+ dev=${dev%/dev/}
+ for d in /sys/class/block/*/holders/*; do
+ [ -e "$d" ] || continue
+ e=$(basename "$d")
+ if [ "$e" = "$dev" ]; then
+ echo "/dev/$(basename "$(dirname "$(dirname "$d")")")"
+ fi
+ done
+}
+
+# System uptime in seconds.
+uptime_s() {
+ local a b
+
+ echo "$(</proc/uptime)" | { read -r a b && echo "${a%%.*}"; }
+}
+
+# Sleep until either $1 seconds have elapsed or until the deadline $2 has been
+# reached. Return 1 if and only if the deadline has been met.
+sleep_until() {
+ local duration=$1 deadline=$2 u
+
+ u=$(uptime_s)
+ if [ $((u + duration)) -le "$deadline" ]; then
+ sleep "$duration"
+ else
+ [ "$deadline" -gt "$u" ] && sleep $((deadline - u))
+ return 1
+ fi
+}
+
+# Simulate network failures for device $1 during $2 seconds.
+simulate_network_failure_loop() {
+ local d dev="$1" duration="$2" deadline i rc=0 s
+
+ [ -e "$dev" ] || return $?
+ [ -n "$duration" ] || return $?
+ deadline=$(($(uptime_s) + duration))
+ s=5
+ while [ $rc = 0 ]; do
+ sleep_until 5 ${deadline} || break
+ if [ -n "$nvme" ]; then
+ for d in $(held_by "$dev"); do
+ echo 1 >"$d/device/reset_controller"
+ done
+ else
+ log_out
+ sleep_until $s ${deadline}
+ rc=$?
+ s=$(((((s + 5) & 0xff) ^ 0xa6) * scsi_timeout / 60))
+ log_in
+ fi
+ done
+
+ for ((i=0;i<5;i++)); do
+ log_in && break
+ sleep 1
+ done
+}
+
+# Kill all processes that have opened block device $1.
+stop_bdev_users() {
+ [ -n "$1" ] || return $?
+ lsof -F p "$1" 2>/dev/null | while read -r line; do
+ p="${line#p}"
+ if [ "$p" != "$line" ]; then
+ echo -n " (pid $p)" >>"$FULL"
+ kill -9 "$p"
+ fi
+ done
+}
+
+# RHEL 6 dmsetup accepts mpath<n> but not /dev/dm-<n> as its first argument.
+# Hence this function that converts /dev/dm-<n> into mpath<n>.
+dev_to_mpath() {
+ local d e mm
+
+ d="${1#/dev/mapper/}";
+ if [ "$d" != "$1" ]; then
+ echo "$d"
+ return 0
+ fi
+
+ [ -e "$1" ] || return $?
+
+ if [ -L "$1" ]; then
+ e=$(readlink -f "$1")
+ else
+ e="$1"
+ fi
+ if ! mm=$(stat -c %t:%T "$e"); then
+ echo "stat $1 -> $e failed"
+ return 1
+ fi
+
+ for d in /dev/mapper/mpath*; do
+ if [ -L "$d" ]; then
+ e=$(readlink -f "$d")
+ elif [ -e "$d" ]; then
+ e="$d"
+ else
+ continue
+ fi
+ if [ "$(stat -c %t:%T "$e")" = "$mm" ]; then
+ basename "$d"
+ return 0
+ fi
+ done
+ return 1
+}
+
+# Modify mpath device $1 to fail_if_no_path mode, unmount the filesystem on top
+# of it and remove the mpath device.
+remove_mpath_dev() {
+ local cmd dm i output t1 t2
+
+ {
+ for ((i=10;i>0;i--)); do
+ cmd="dm=\$(dev_to_mpath \"$1\")"
+ if ! eval "$cmd"; then
+ echo "$cmd: failed"
+ else
+ t1=$(dmsetup table "$dm")
+ cmd="dmsetup message $dm 0 fail_if_no_path"
+ if ! eval "$cmd"; then
+ echo "$cmd: failed"
+ else
+ t2=$(dmsetup table "$dm")
+ if echo "$t2" | grep -qw queue_if_no_path; then
+ echo "$dm: $t1 -> $t2"
+ fi
+ echo "Attempting to unmount /dev/mapper/$dm"
+ umount "/dev/mapper/$dm"
+ cmd="dmsetup remove $dm"
+ if ! output=$(eval "$cmd" 2>&1); then
+ echo "$cmd: $output; retrying"
+ else
+ echo "done"
+ break
+ fi
+ fi
+ fi
+ if [ ! -e "$1" ]; then
+ break
+ fi
+ ls -l "$1"
+ stop_bdev_users "$(readlink -f "$1")"
+ sleep .5
+ done
+ if [ $i = 0 ]; then
+ echo "failed"
+ return 1
+ fi
+ } &>>"$FULL"
+}
+
+# Check whether one or more arguments contain stale device nodes (/dev/...).
+mpath_has_stale_dev() {
+ local d
+
+ for d in "$@"; do
+ if [ "${d/://}" != "$d" ]; then
+ grep -qw "$d" /sys/class/block/*/dev 2>/dev/null ||
+ return 0
+ fi
+ done
+
+ return 1
+}
+
+# Check whether multipath definition $1 includes the queue_if_no_path keyword.
+is_qinp_def() {
+ case "$1" in
+ " 3 queue_if_no_path queue_mode mq ")
+ return 0;;
+ " 1 queue_if_no_path ")
+ return 0;;
+ *)
+ return 1;;
+ esac
+}
+
+# Remove all mpath devices that refer to one or more SRP devices or that refer
+# to an already deleted block device.
+remove_srp_mpath_devs() {
+ local b d dm h p s
+
+ {
+ echo "Examining all SRP LUNs"
+ for p in /sys/class/srp_remote_ports/*; do
+ [ -e "$p" ] || continue
+ h="${p##*/}"; h="${h#port-}"; h="${h%:1}"
+ for d in "/sys/class/scsi_device/${h}:"*/device/block/*; do
+ [ -e "$d" ] || continue
+ s=$(dirname "$(dirname "$(dirname "$d")")")
+ s=$(basename "$s")
+ b=$(basename "$d")
+ for h in "/sys/class/block/$b/holders/"*; do
+ [ -e "$h" ] || continue
+ dm=/dev/$(basename "$h")
+ {
+ echo -n "SRP LUN $s / $b: removing $dm: "
+ if ! remove_mpath_dev "$dm"; then
+ echo "failed"
+ [ -z "$debug" ] || return 1
+ fi
+ }
+ done
+ done
+ done
+ # Find all multipaths with one or more deleted devices and remove these
+ echo "Examining all multipaths"
+ dmsetup table | while read -r mpdev fs ls type def; do
+ echo "$fs $ls" >/dev/null
+ # shellcheck disable=SC2086
+ if [ "$type" = multipath ] &&
+ { is_qinp_def "$def" || mpath_has_stale_dev $def; }; then
+ echo "${mpdev%:}"
+ fi
+ done |
+ sort -u |
+ while read -r mpdev; do
+ mpdev="/dev/mapper/$mpdev"
+ echo -n "removing $mpdev: "
+ if ! remove_mpath_dev "$mpdev"; then
+ echo "failed"
+ [ -z "$debug" ] || return 1
+ fi
+ done
+ echo "Finished examining multipaths"
+ } &>> "$FULL"
+}
+
+remove_nvme_mpath_devs() {
+ local dm h
+
+ for h in /sys/class/block/nvme*/holders/*; do
+ [ -e "$h" ] || continue
+ d=$(basename "$(dirname "$(dirname "$h")")")
+ dm=/dev/$(basename "$h")
+ {
+ echo -n "NVME dev $d: removing $dm: "
+ dmsetup remove "$(dev_to_mpath "$dm")" && echo "done"
+ } &>> "$FULL"
+ done
+}
+
+remove_mpath_devs() {
+ if [ -n "$nvme" ]; then
+ remove_nvme_mpath_devs
+ else
+ remove_srp_mpath_devs
+ fi
+}
+
+# Arguments: module to unload ($1) and retry count ($2).
+unload_module() {
+ local i m=$1 rc=${2:-1}
+
+ [ ! -e "/sys/module/$m" ] && return 0
+ for ((i=rc;i>0;i--)); do
+ modprobe -r "$m"
+ [ ! -e "/sys/module/$m" ] && return 0
+ sleep .1
+ done
+ return 1
+}
+
+# Load the SRP initiator driver with kernel module parameters $1..$n.
+start_srp() {
+ modprobe scsi_transport_srp || return $?
+ modprobe ib_srp "$@" dyndbg=+pmf || return $?
+}
+
+# Unload the SRP initiator driver.
+stop_srp() {
+ local i
+
+ srp_log_out
+ for ((i=40;i>=0;i--)); do
+ remove_mpath_devs || return $?
+ unload_module ib_srp >/dev/null 2>&1 && break
+ sleep 1
+ done
+ if [ -e /sys/module/ib_srp ]; then
+ echo "Error: unloading kernel module ib_srp failed"
+ return 1
+ fi
+ unload_module scsi_transport_srp || return $?
+}
+
+start_nvme_client() {
+ modprobe nvme dyndbg=+pmf &&
+ modprobe nvme-core dyndbg=+pmf &&
+ modprobe nvme-fabrics dyndbg=+pmf &&
+ modprobe nvme-rdma dyndbg=+pmf
+}
+
+stop_nvme_client() {
+ unload_module nvme_rdma &&
+ unload_module nvme
+}
+
+# Load the initiator kernel driver with kernel module parameters $1..$n.
+start_client() {
+ if [ -n "$nvme" ]; then
+ start_nvme_client "$@"
+ else
+ start_srp "$@"
+ fi
+}
+
+stop_client() {
+ if [ -n "$nvme" ]; then
+ stop_nvme_client
+ else
+ stop_srp
+ fi
+}
+
+# Load the configfs kernel module and mount it.
+mount_configfs() {
+ if [ ! -e /sys/module/configfs ]; then
+ modprobe configfs || return $?
+ fi
+ if ! mount | grep -qw configfs; then
+ mount -t configfs none /sys/kernel/config || return $?
+ fi
+}
+
+# Associate the LIO device with name $1/$2 with file $3 and SCSI serial $4.
+configure_lio_vdev() {
+ local dirname=$1 vdev=$2 path=$3 serial=$4
+
+ (
+ cd /sys/kernel/config/target/core &&
+ mkdir "$dirname" &&
+ cd "$dirname" &&
+ mkdir "$vdev" &&
+ cd "$vdev" &&
+ if [ -b "$(readlink -f "$path")" ]; then
+ echo "udev_path=$path," >control
+ elif [ -e "$path" ]; then
+ size=$(stat -c %s "${path}") &&
+ [ "$size" -gt 0 ] &&
+ echo "fd_dev_name=$path,fd_dev_size=$size," >control
+ else
+ {
+ ls -l "$path"
+ readlink -f "$path"
+ } &>>"$FULL"
+ false
+ fi &&
+ echo "${serial}" >wwn/vpd_unit_serial &&
+ echo 1 > enable
+ )
+}
+
+# Return the multipath ID of LIO device $1. $1 is an index in the $scsi_serial
+# array.
+lio_scsi_mpath_id() {
+ local i=$1 hs
+
+ is_number "$i" || return $?
+ hs=$(echo -n "${scsi_serial[i]}" | od -v -tx1 -w99 |
+ { read -r offset bytes;
+ echo "${bytes// }";
+ echo "$offset" > /dev/null
+ })
+ while [ ${#hs} -lt 25 ]; do
+ hs="${hs}0"
+ done
+ # See also spc_emulate_evpd_83() in drivers/target/target_core_spc.c.
+ echo "36001405$hs"
+}
+
+scsi_mpath_id() {
+ lio_scsi_mpath_id "$@"
+}
+
+get_nvme_bdev() {
+ local i=$1 j=0
+
+ for d in /sys/class/nvme-fabrics/ctl/*/*/device; do
+ [ -d "$d" ] || continue
+ if [ $j -ge "$i" ]; then
+ echo "/dev/$(basename "$(dirname "$d")")"
+ return 0
+ fi
+ ((j++))
+ done
+ return 1
+}
+
+# Get a the uuid or wwid of LIO device $1. $1 is an index in the $scsi_serial
+# array.
+get_bdev_uid() {
+ local i=$1
+
+ is_number "$i" || return $?
+ if [ -n "$nvme" ]; then
+ bdev=$(get_nvme_bdev "$i") || return $?
+ wwid=$(<"/sys/block/${bdev#/dev/}/wwid")
+ wwid=${wwid#nvme.0000-}
+ echo "${wwid%-4c696e75780000000000000000000000000000000000000000000000000000000000000000000000-00000001}"
+ else
+ scsi_mpath_id "$i"
+ fi
+}
+
+# Set scheduler of block device $1 to $2.
+set_scheduler() {
+ local b=$1 p s=$2
+
+ p=/sys/class/block/$b/queue/scheduler
+ if [ -e "/sys/block/$b/mq" ]; then
+ case "$s" in
+ noop) s=none;;
+ deadline) s=mq-deadline;;
+ bfq) s=bfq;;
+ esac
+ else
+ case "$s" in
+ none) s=noop;;
+ mq-deadline) s=deadline;;
+ bfq-mq) s=bfq;;
+ esac
+ fi
+ if ! echo "$s" > "$p"; then
+ echo "Changing scheduler of $b from $(<"$p") into $s failed"
+ return 1
+ fi
+}
+
+# Get a /dev/... path that points at dm device number $1. $1 is an index in
+# the $scsi_serial.
+get_bdev() {
+ local b d dev h i=$1 j realdev
+
+ is_number "$i" || return $?
+ echo reconfigure | multipathd -k >&/dev/null
+ dev="/dev/disk/by-id/dm-uuid-mpath-$(get_bdev_uid "$i")" || return $?
+ for ((j=0;j<50;j++)); do
+ [ -e "$dev" ] && break
+ sleep .1
+ done
+ if [ ! -e "$dev" ]; then
+ echo "$dev: not found"
+ return 1
+ fi
+ if [ ! -L "$dev" ]; then
+ echo "$dev: not a soft link"
+ return 1
+ fi
+ realdev=$(readlink "$dev" 2>/dev/null || echo "?")
+ echo "Using $dev -> ${realdev}" >>"$FULL"
+ for ((j=0; j<50; j++)); do
+ blockdev --getbsz "$dev" >&/dev/null && break
+ echo reconfigure | multipathd -k >& /dev/null
+ sleep .1
+ done
+ if ! blockdev --getbsz "$dev" >&/dev/null; then
+ return 1
+ fi
+ b=$(basename "$realdev")
+ set_scheduler "$b" "${elevator}"
+ for d in /sys/class/block/*"/holders/$b"; do
+ [ -e "$d" ] || continue
+ h="$(basename "$(dirname "$(dirname "$d")")")"
+ set_scheduler "$h" "${elevator}"
+ if [ -e "/sys/class/block/$h/device/timeout" ]; then
+ echo $scsi_timeout > "/sys/class/block/$h/device/timeout"
+ fi
+ done
+ echo "$dev"
+}
+
+# Configure zero or more target ports such that these accept connections from
+# zero or more initiator ports. Target and initiator port lists are separated
+# by "--".
+configure_target_ports() {
+ local i ini initiators target_port target_ports
+
+ target_ports=()
+ while [ $# -gt 0 ]; do
+ if [ "$1" = "--" ]; then
+ shift
+ break
+ fi
+ target_ports+=("$1")
+ shift
+ done
+
+ initiators=()
+ while [ $# -gt 0 ]; do
+ initiators+=("$1")
+ shift
+ done
+
+ for target_port in "${target_ports[@]}"; do
+ mkdir "$target_port" || return $?
+ [ -e "$target_port" ] || continue
+ #echo "$target_port"
+ mkdir "$target_port/$target_port" || continue
+ i=0
+ for v in "${vdevs[@]}"; do
+ mkdir "$target_port/$target_port/lun/lun_$i" || return $?
+ (
+ cd "$target_port/$target_port/lun/lun_$i" &&
+ ln -s "../../../../../core/$v" .
+ ) || return $?
+ i=$((i+1))
+ done
+ for ini in "${initiators[@]}"; do
+ (
+ cd "$target_port/$target_port/acls" &&
+ mkdir "${ini}" &&
+ cd "${ini}" &&
+ for ((i = 0; i < ${#vdevs[@]}; i++)) do
+ (
+ mkdir lun_$i &&
+ cd lun_$i &&
+ ln -s ../../../lun/lun_$i .
+ ) || return $?
+ done
+ ) || return $?
+ done
+ echo 1 >"$target_port/$target_port/enable"
+ done
+}
+
+function mountpoint() {
+ if [ -z "$TMPDIR" ]; then
+ echo "Error: \$TMPDIR has not been set." 1>&2
+ exit 1
+ fi
+ if [ -z "$1" ]; then
+ echo "Error: missing argument" 1>&2
+ exit 1
+ fi
+ echo "$TMPDIR/mnt$1"
+}
+
+all_primary_gids() {
+ find /sys/devices -name infiniband | while read -r p; do
+ cat "$p"/*/ports/*/gids/0
+ done | grep -v ':0000:0000:0000:0000$'
+}
+
+# Load LIO and configure the SRP target driver and LUNs.
+start_lio_srpt() {
+ local b d gid guid i ini_gids ini_guids opts p target_gids target_guids vdev
+
+ # shellcheck disable=SC2207
+ target_guids=($(all_primary_gids | sed 's/^fe80:0000:0000:0000://'))
+ # shellcheck disable=SC2207
+ target_gids=($(all_primary_gids | sed 's/^/0x/;s/://g'))
+ for p in /sys/class/infiniband/*/ports/*; do
+ [ -e "$p" ] || continue
+ link_layer=$(<"$p/link_layer")
+ case "$link_layer" in
+ InfiniBand)
+ guid=$(<"$p/gids/0")
+ gid=$(echo "${guid}" | sed 's/^fe8/0x000/;s/://g')
+ guid=${guid#fe80:0000:0000:0000:}
+ [ "$guid" = "0000:0000:0000:0000" ] && continue
+ ini_guids+=("$guid")
+ ini_gids+=("$gid")
+ ;;
+ *)
+ d=$(<"$(dirname "$(dirname "$p")")/parent")
+ for b in $(get_ipv4_addr "$d") \
+ $(get_ipv6_addr "$d"|expand_ipv6_addr); do
+ ini_guids+=("$b")
+ ini_gids+=("$b")
+ done
+ ;;
+ esac
+ done
+ mount_configfs || return $?
+ modprobe target_core_mod || return $?
+ modprobe target_core_iblock || return $?
+ opts=("srp_max_req_size=4200" "dyndbg=+pmf")
+ if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
+ opts+=("rdma_cm_port=${srp_rdma_cm_port}")
+ fi
+ insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko" "${opts[@]}" || return $?
+ i=0
+ for r in "${vdev_path[@]}"; do
+ if [ -b "$(readlink -f "$r")" ]; then
+ oflag=oflag=direct
+ else
+ oflag=
+ fi
+ echo -n "Zero-initializing $r ... " >>"$FULL"
+ dd if=/dev/zero of="${r}" bs=1M count=$((ramdisk_size>>20)) ${oflag} >/dev/null 2>&1 || return $?
+ echo "done" >>"$FULL"
+ mkdir -p "$(mountpoint $i)" || return $?
+ ((i++))
+ done
+ for ((i=0; i < ${#vdevs[@]}; i++)); do
+ d="$(dirname "${vdevs[i]}")"
+ b="$(basename "${vdevs[i]}")"
+ hs=$(lio_scsi_mpath_id "$i")
+ hs=${hs#36001405}
+ configure_lio_vdev "$d" "$b" "${vdev_path[i]}" "$hs" ||
+ return $?
+ done
+ (
+ cd /sys/kernel/config/target || return $?
+ mkdir srpt || return $?
+ cd srpt || return $?
+ if [ -e discovery_auth/rdma_cm_port ]; then
+ echo "${srp_rdma_cm_port}" > discovery_auth/rdma_cm_port ||
+ return $?
+ fi
+ configure_target_ports "${target_guids[@]}" -- "${ini_guids[@]}" || {
+ echo "Retrying with old port name format"
+ configure_target_ports "${target_gids[@]}" -- "${ini_gids[@]}"
+ }
+ )
+}
+
+# Check whether or not an rdma_rxe instance has been associated with network
+# interface $1.
+has_rdma_rxe() {
+ local f
+
+ for f in /sys/class/infiniband/*/parent; do
+ if [ -e "$f" ] && [ "$(<"$f")" = "$1" ]; then
+ return 0
+ fi
+ done
+
+ return 1
+}
+
+# Load the rdma_rxe kernel module and associate it with all network interfaces.
+start_rdma_rxe() {
+ {
+ modprobe rdma_rxe || return $?
+ (
+ cd /sys/class/net &&
+ for i in *; do
+ if [ -e "$i" ] && ! has_rdma_rxe "$i"; then
+ echo "$i" > /sys/module/rdma_rxe/parameters/add
+ fi
+ done
+ )
+ } >>"$FULL"
+}
+
+# Dissociate the rdma_rxe kernel module from all network interfaces and unload
+# the rdma_rxe kernel module.
+stop_rdma_rxe() {
+ (
+ cd /sys/class/net &&
+ for i in *; do
+ if [ -e "$i" ] && has_rdma_rxe "$i"; then
+ { echo "$i" > /sys/module/rdma_rxe/parameters/remove; } \
+ 2>/dev/null
+ fi
+ done
+ )
+ if ! unload_module rdma_rxe; then
+ echo "Unloading rdma_rxe failed"
+ return 1
+ fi
+}
+
+scsi_debug_dev_path() {
+ local bd="" d
+
+ for d in /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*; do
+ [ -e "$d" ] || continue
+ bd=${d/*\//}
+ done
+ [ -n "$bd" ] || return 1
+ echo "/dev/$bd"
+}
+
+# Unload the LIO SRP target driver.
+stop_lio_srpt() {
+ local e m
+
+ mkdir -p /etc/target
+ for e in /sys/kernel/config/target/srpt/*/*/enable; do
+ if [ -e "$e" ]; then
+ echo 0 >"$e"
+ fi
+ done
+
+ if [ -e /sys/kernel/config/target/srpt ]; then
+ (
+ cd /sys/kernel/config/target/srpt && (
+ for d in */*/acls/*/*/lun*; do [ -L "$d" ] && rm "$d"; done
+ for d in */*/acls/*/lun*; do [ -d "$d" ] && rmdir "$d"; done
+ for d in */*/acls/*; do [ -d "$d" ] && rmdir "$d"; done
+ for d in */*/lun/lun*/*; do [ -L "$d" ] && rm "$d"; done
+ for d in */*/lun/lun*; do [ -d "$d" ] && rmdir "$d"; done
+ for d in */*; do [ -e "$d/lun" ] && rmdir "$d"; done
+ for d in *; do [ -e "$d/fabric_statistics" ] && rmdir "$d"; done
+ true
+ ) &&
+ cd .. &&
+ for ((i=0;i<10;i++)); do
+ rmdir srpt
+ [ -e srpt ] || break
+ sleep .1
+ done &&
+ [ ! -e srpt ] &&
+ unload_module ib_srpt 10
+ ) || return $?
+ fi
+
+ rmdir /sys/kernel/config/target/core/*/* >&/dev/null
+ rmdir /sys/kernel/config/target/core/* >&/dev/null
+
+ for m in ib_srpt target_core_pscsi target_core_iblock target_core_file \
+ target_core_stgt target_core_user target_core_mod
+ do
+ unload_module $m 10 || return $?
+ done
+}
+
+# Load and configure the SRP target driver
+start_srpt() {
+ local bd i
+
+ modprobe scsi_debug delay=0 dif=3 dix=1 dev_size_mb=$((ramdisk_size>>20))
+ for ((i=0;i<10;i++)); do
+ bd=$(scsi_debug_dev_path) && break
+ sleep .1
+ done
+ if [ -z "$bd" ]; then
+ echo "scsi_debug device instance not found"
+ return 1
+ fi
+ vdev_path[2]=$bd
+ modprobe ib_uverbs
+ modprobe ib_umad
+ modprobe rdma_cm
+ start_lio_srpt || return $?
+ echo "Configured SRP target driver"
+}
+
+# Unload the SRP target driver.
+stop_srpt() {
+ stop_lio_srpt || return $?
+ unload_module scsi_debug
+}
+
+configure_nvmet_port() {
+ local p=$1 ipv4_addr=$2 i
+
+ echo "Configuring $p with address $ipv4_addr as an NVMeOF target port" \
+ >>"$FULL"
+ (
+ cd /sys/kernel/config/nvmet/ports &&
+ for ((i=1;1;i++)); do [ -e "$i" ] || break; done &&
+ mkdir "$i" &&
+ cd "$i" &&
+ echo ipv4 > addr_adrfam &&
+ echo rdma > addr_trtype &&
+ echo -n "$ipv4_addr" > addr_traddr &&
+ echo -n ${nvme_port} > addr_trsvcid
+ )
+}
+
+start_nvme_target() {
+ local d i ipv4_addr num_ports=0 nvme_dev=1
+
+ if have_brd; then
+ modprobe brd rd_nr=${#vdev_path[@]} rd_size=$((ramdisk_size>>10))
+ fi &&
+ modprobe nvme dyndbg=+pmf &&
+ modprobe nvmet-rdma dyndbg=+pmf &&
+ sleep .1 &&
+ (
+ cd /sys/kernel/config/nvmet/subsystems &&
+ mkdir ${nvme_subsysnqn} &&
+ cd ${nvme_subsysnqn} &&
+ cd namespaces &&
+ mkdir "${nvme_dev}" &&
+ cd "${nvme_dev}" &&
+ echo 00000000-0000-0000-0000-000000000000 >device_nguid &&
+ echo -n /dev/ram0 >device_path &&
+ echo 1 >enable &&
+ cd ../.. &&
+ echo 1 >attr_allow_any_host
+ ) && for i in $(rdma_network_interfaces); do
+ ipv4_addr=$(get_ipv4_addr "$i")
+ if [ -n "${ipv4_addr}" ]; then
+ configure_nvmet_port "$i" "${ipv4_addr}"
+ ((num_ports++))
+ true
+ fi
+ done &&
+ if [ $num_ports = 0 ]; then
+ echo "No NVMeOF target ports"
+ false
+ fi && (
+ cd /sys/kernel/config/nvmet/ports &&
+ for i in *; do
+ [ -e "$i" ] && (
+ cd "$i/subsystems" &&
+ ln -s "../../../subsystems/${nvme_subsysnqn}" .
+ )
+ done
+ )
+}
+
+stop_nvme_target() {
+ local d
+
+ (
+ cd /sys/kernel/config/nvmet 2>/dev/null &&
+ rm -f -- ports/*/subsystems/* &&
+ for d in {*/*/*/*,*/*}; do
+ [ -e "$d" ] && rmdir "$d"
+ done
+ )
+ unload_module nvmet_rdma &&
+ unload_module nvmet &&
+ have_brd && unload_module brd
+}
+
+start_target() {
+ start_rdma_rxe
+ (
+ echo "RDMA interfaces:"
+ cd /sys/class/infiniband &&
+ for i in *; do
+ [ -e "$i" ] || continue
+ for p in "$i/ports/"*; do
+ echo "$i, port $(basename "$p"): $(<"$p/gids/0")"
+ done
+ done
+ ) &>>"$FULL"
+ if [ -n "$nvme" ]; then
+ start_nvme_target
+ else
+ start_srpt
+ fi
+}
+
+stop_target() {
+ if [ -n "$nvme" ]; then
+ stop_nvme_target
+ else
+ stop_srpt
+ fi
+ stop_rdma_rxe || return $?
+}
+
+# Look up the block device below the filesystem for directory $1.
+block_dev_of_dir() {
+ df "$1" | {
+ read -r header
+ echo "$header" >/dev/null
+ read -r blockdev rest
+ echo "$blockdev"
+ }
+}
+
+create_filesystem() {
+ local dev=$1
+
+ case "$filesystem_type" in
+ ext4)
+ mkfs.ext4 -F -O ^has_journal -q "$dev";;
+ xfs)
+ mkfs.xfs -f -q "$dev";;
+ *)
+ return 1;;
+ esac
+}
+
+is_mountpoint() {
+ [ -n "$1" ] &&
+ [ -d "$1" ] &&
+ [ "$(block_dev_of_dir "$1")" != \
+ "$(block_dev_of_dir "$(dirname "$1")")" ]
+}
+
+# Execute mount "$@" and check whether the mount command has succeeded by
+# verifying whether after mount has finished that ${$#} is a mountpoint.
+mount_and_check() {
+ local dir last
+
+ dir=$(for last; do :; done; echo "$last")
+ mount "$@"
+ if ! is_mountpoint "$dir"; then
+ echo "Error: mount $* failed"
+ return 1
+ fi
+}
+
+# Unmount the filesystem mounted at mountpoint $1. In contrast with the umount
+# command, this function does not accept a block device as argument.
+unmount_and_check() {
+ local bd m=$1 mp
+
+ if is_mountpoint "$m"; then
+ bd=$(block_dev_of_dir "$m")
+ mp=$(dev_to_mpath "$bd") 2>/dev/null
+ if [ -n "$mp" ]; then
+ dmsetup message "$mp" 0 fail_if_no_path
+ fi
+ stop_bdev_users "$bd"
+ echo "Unmounting $m from $bd" >> "$FULL"
+ umount "$m" || umount --lazy "$m"
+ fi
+ if is_mountpoint "$m"; then
+ echo "Error: unmounting $m failed"
+ return 1
+ fi
+}
+
+# Test whether fio supports command-line options "$@"
+test_fio_opt() {
+ local opt
+
+ for opt in "$@"; do
+ opt=${opt//=*}
+ fio --help |& grep -q -- "${opt}=" && continue
+ opt=${opt#--}
+ fio --cmdhelp=all |& grep -q "^${opt}[[:blank:]]" && continue
+ return 1
+ done
+}
+
+run_fio() {
+ local a args avail_kb="" bd="" d="" j opt output
+
+ args=("$@")
+ j=1
+ for opt in "${args[@]}"; do
+ case "$opt" in
+ --directory=*) d="${opt#--directory=}";;
+ --filename=*) bd="${opt#--filename=}";;
+ --numjobs=*) j="${opt#--numjobs=}";;
+ --output=*) output="${opt#--output=}";;
+ esac
+ done
+ if [ -n "$d" ]; then
+ a=$(df "$d" | grep "^/" |
+ {
+ if read -r fs blocks used avail use mnt; then
+ echo "$avail"
+ echo "$fs $blocks $used $use $mnt" >/dev/null
+ fi
+ }
+ )
+ avail_kb=$a
+ fi
+ if [ -n "$bd" ]; then
+ avail_kb=$(("$(blockdev --getsz "$bd")" / 2))
+ fi
+ if [ -n "$avail_kb" ]; then
+ args+=("--size=$(((avail_kb * 1024 * 7 / 10) / j & ~4095))")
+ fi
+ for opt in --exitall_on_error=1 --gtod_reduce=1 --aux-path=${fio_aux_path}
+ do
+ if test_fio_opt "$opt"; then
+ args+=("$opt")
+ fi
+ done
+ mkdir -p "${fio_aux_path}"
+ echo "fio ${args[*]}" >>"$FULL"
+ fio "${args[@]}" 2>&1 || return $?
+ if [ -n "$output" ]; then
+ # Return exit code 1 if no I/O has been performed.
+ grep -q ', io=[0-9].*, run=[0-9]' "$output"
+ fi
+}
+
+# Configure two null_blk instances.
+configure_null_blk() {
+ local i
+
+ (
+ cd /sys/kernel/config/nullb || return $?
+ for i in nullb0 nullb1; do (
+ { mkdir -p $i &&
+ cd $i &&
+ echo 0 > completion_nsec &&
+ echo 512 > blocksize &&
+ echo $((ramdisk_size>>20)) > size &&
+ echo 1 > memory_backed &&
+ echo 1 > power; } || exit $?
+ ) done
+ )
+ ls -l /dev/nullb* &>>"$FULL"
+}
+
+unload_null_blk() {
+ local d
+
+ for d in /sys/kernel/config/nullb/*; do [ -d "$d" ] && rmdir "$d"; done
+ unload_module null_blk
+}
+
+shutdown_client() {
+ remove_mpath_devs &&
+ log_out &&
+ stop_client
+}
+
+# Undo setup()
+teardown() {
+ killall -9 multipathd >&/dev/null
+ stop_target
+ unload_null_blk
+}
+
+# Set up test configuration
+setup() {
+ local i m modules
+
+ set -u
+
+ shutdown_client || return $?
+
+ if ! teardown; then
+ echo "teardown() failed"
+ return 1
+ fi
+
+ modules=(
+ configfs
+ dm-multipath
+ dm_mod
+ scsi_dh_alua
+ scsi_dh_emc
+ scsi_dh_rdac
+ scsi_mod
+ )
+ for m in "${modules[@]}"; do
+ [ -e "/sys/module/$m" ] || modprobe "$m" || return $?
+ done
+
+ modprobe null_blk nr_devices=0 || return $?
+
+ configure_null_blk
+
+ multipathd
+
+ # Load the I/O scheduler kernel modules
+ (
+ cd "/lib/modules/$(uname -r)/kernel/block" &&
+ for m in *.ko; do
+ [ -e "$m" ] && modprobe "${m%.ko}"
+ done
+ )
+
+ if [ -d /sys/kernel/debug/dynamic_debug ]; then
+ for m in ; do
+ echo "module $m +pmf" >/sys/kernel/debug/dynamic_debug/control
+ done
+ fi
+
+ start_target
+}
This patch adds the following tests: 001: Create and remove LUNs 002: File I/O on top of multipath concurrently with logout and login (mq) 003: File I/O on top of multipath concurrently with logout and login (sq) 004: File I/O on top of multipath concurrently with logout and login (sq-on-mq) 005: Direct I/O with large transfer sizes, cmd_sg_entries=255 and bs=4M 006: Direct I/O with large transfer sizes, cmd_sg_entries=255 and bs=8M 007: Direct I/O with large transfer sizes, cmd_sg_entries=1 and bs=4M 008: Direct I/O with large transfer sizes, cmd_sg_entries=1 and bs=8M 009: Buffered I/O with large transfer sizes, cmd_sg_entries=255 and bs=4M 010: Buffered I/O with large transfer sizes, cmd_sg_entries=255 and bs=8M 011: Block I/O on top of multipath concurrently with logout and login 012: dm-mpath on top of multiple I/O schedulers 013: Direct I/O using a discontiguous buffer Other changes in this patch are: - Document how to install multipath.conf in README.md. - Add function _have_kernel_option to common/rc. - Add file tests/srp/rc with shell functions that are used by multiple SRP tests. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> --- README.md | 13 + common/rc | 17 + tests/srp/001 | 73 ++ tests/srp/001.out | 3 + tests/srp/002 | 50 ++ tests/srp/002.out | 2 + tests/srp/003 | 50 ++ tests/srp/003.out | 2 + tests/srp/004 | 50 ++ tests/srp/004.out | 2 + tests/srp/005 | 41 ++ tests/srp/005.out | 2 + tests/srp/006 | 41 ++ tests/srp/006.out | 2 + tests/srp/007 | 41 ++ tests/srp/007.out | 2 + tests/srp/008 | 40 ++ tests/srp/008.out | 2 + tests/srp/009 | 41 ++ tests/srp/009.out | 2 + tests/srp/010 | 41 ++ tests/srp/010.out | 2 + tests/srp/011 | 46 ++ tests/srp/011.out | 2 + tests/srp/012 | 53 ++ tests/srp/012.out | 2 + tests/srp/013 | 49 ++ tests/srp/013.out | 3 + tests/srp/multipath.conf | 27 + tests/srp/rc | 1433 ++++++++++++++++++++++++++++++++++++++ 30 files changed, 2134 insertions(+) create mode 100755 tests/srp/001 create mode 100644 tests/srp/001.out create mode 100755 tests/srp/002 create mode 100644 tests/srp/002.out create mode 100755 tests/srp/003 create mode 100644 tests/srp/003.out create mode 100755 tests/srp/004 create mode 100644 tests/srp/004.out create mode 100755 tests/srp/005 create mode 100644 tests/srp/005.out create mode 100755 tests/srp/006 create mode 100644 tests/srp/006.out create mode 100755 tests/srp/007 create mode 100644 tests/srp/007.out create mode 100755 tests/srp/008 create mode 100644 tests/srp/008.out create mode 100755 tests/srp/009 create mode 100644 tests/srp/009.out create mode 100755 tests/srp/010 create mode 100644 tests/srp/010.out create mode 100755 tests/srp/011 create mode 100644 tests/srp/011.out create mode 100755 tests/srp/012 create mode 100644 tests/srp/012.out create mode 100755 tests/srp/013 create mode 100644 tests/srp/013.out create mode 100644 tests/srp/multipath.conf create mode 100755 tests/srp/rc