[2/2] drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT
diff mbox series

Message ID 20180723212735.23893-2-matthew.s.atwood@intel.com
State New
Headers show
Series
  • [1/2] drm/dp: add extended receiver capability field present bit
Related show

Commit Message

Matt Atwood July 23, 2018, 9:27 p.m. UTC
From: Matt Atwood <matthew.s.atwood@intel.com>

According to DP spec (2.9.3.1 of DP 1.4) if
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD
02200h through 0220Fh shall contain the DPRX's true capability. These
values will match 00000h through 0000Fh, except for DPCD_REV,
MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.

Read from DPCD once for all 3 values as this is an expensive operation.
Spec mentions that all of address space 02200h through 0220Fh should
contain the right information however currently only 3 values can
differ.

There is no address space in the intel_dp->dpcd struct for addresses
02200h through 0220Fh, and since so much of the data is a identical,
simply overwrite the values stored in 00000h through 0000Fh with the
values that can be overwritten from addresses 02200h through 0220Fh.

This patch helps with backward compatibility for devices pre DP1.3.

v2: read only dpcd values which can be affected, remove incorrect check,
split into drm include changes into separate patch, commit message,
verbose debugging statements during overwrite.
v3: white space fixes
v4: make path dependent on DPCD revision > 1.2
v5: split into function, removed DPCD rev check

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

Comments

Vivi, Rodrigo July 23, 2018, 10:19 p.m. UTC | #1
On Mon, Jul 23, 2018 at 02:27:35PM -0700, matthew.s.atwood@intel.com wrote:
> From: Matt Atwood <matthew.s.atwood@intel.com>
> 
> According to DP spec (2.9.3.1 of DP 1.4) if
> EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD
> 02200h through 0220Fh shall contain the DPRX's true capability. These
> values will match 00000h through 0000Fh, except for DPCD_REV,
> MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.
> 
> Read from DPCD once for all 3 values as this is an expensive operation.
> Spec mentions that all of address space 02200h through 0220Fh should
> contain the right information however currently only 3 values can
> differ.
> 
> There is no address space in the intel_dp->dpcd struct for addresses
> 02200h through 0220Fh, and since so much of the data is a identical,
> simply overwrite the values stored in 00000h through 0000Fh with the
> values that can be overwritten from addresses 02200h through 0220Fh.
> 
> This patch helps with backward compatibility for devices pre DP1.3.
> 
> v2: read only dpcd values which can be affected, remove incorrect check,
> split into drm include changes into separate patch, commit message,
> verbose debugging statements during overwrite.
> v3: white space fixes
> v4: make path dependent on DPCD revision > 1.2
> v5: split into function, removed DPCD rev check
> 
> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index dde92e4af5d3..ed16b93bfe40 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3731,6 +3731,58 @@ intel_dp_link_down(struct intel_encoder *encoder,
>  	}
>  }
>  
> +static void
> +intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
> +{
> +	/*
> +	 * Prior to DP1.3 the bit represented by
> +	 * DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved.
> +	 * if it is set DP_DPCD_REV at 0000h could be at a value less than
> +	 * the true capability of the panel. The only way to check is to
> +	 * then compare 0000h and 2200h.
> +	 */
> +	if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
> +	    DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT) {
> +		uint8_t dpcd_ext[6];
> +
> +		DRM_DEBUG_KMS("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n");
> +
> +		if (drm_dp_dpcd_read(&intel_dp->aux, DP_DP13_DPCD_REV,
> +				     &dpcd_ext, sizeof(dpcd_ext)) < 0)

DRM_ERROR

> +			return;
> +
> +		if (intel_dp->dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV])

DRM_DEBUG_KMS
> +			return;

The silent skip will be hard to debug and we will never know where it went
wrong.

> +
> +		if (memcmp(&intel_dp->dpcd[DP_DPCD_REV], &dpcd_ext[DP_DPCD_REV],
> +			   sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Revision previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_DPCD_REV],
> +				      dpcd_ext[DP_DPCD_REV]);
> +			memcpy(&intel_dp->dpcd[DP_DPCD_REV],
> +			       &dpcd_ext[DP_DPCD_REV], sizeof(u8));
> +		}
> +		if (memcmp(&intel_dp->dpcd[DP_MAX_LINK_RATE],
> +			   &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_MAX_LINK_RATE],
> +				      dpcd_ext[DP_MAX_LINK_RATE]);
> +			memcpy(&intel_dp->dpcd[DP_MAX_LINK_RATE],
> +			       &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8));
> +		}
> +		if (memcmp(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +			   &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT], sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Downstream Port Present  previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +				      dpcd_ext[DP_DOWNSTREAMPORT_PRESENT]);
> +			memcpy(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +			       &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT],
> +			       sizeof(u8));
> +		}
> +	}
> +}
> +
> +
>  bool
>  intel_dp_read_dpcd(struct intel_dp *intel_dp)
>  {
> @@ -3738,6 +3790,8 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp)
>  			     sizeof(intel_dp->dpcd)) < 0)
>  		return false; /* aux transfer failed */
>  
> +	intel_dp_extended_receiver_capabilities(intel_dp);
> +
>  	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
>  
>  	return intel_dp->dpcd[DP_DPCD_REV] != 0;
> -- 
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Vivi, Rodrigo July 24, 2018, 4:30 p.m. UTC | #2
On Mon, Jul 23, 2018 at 02:27:35PM -0700, matthew.s.atwood@intel.com wrote:
> From: Matt Atwood <matthew.s.atwood@intel.com>
> 
> According to DP spec (2.9.3.1 of DP 1.4) if
> EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD
> 02200h through 0220Fh shall contain the DPRX's true capability. These
> values will match 00000h through 0000Fh, except for DPCD_REV,
> MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.
> 
> Read from DPCD once for all 3 values as this is an expensive operation.
> Spec mentions that all of address space 02200h through 0220Fh should
> contain the right information however currently only 3 values can
> differ.
> 
> There is no address space in the intel_dp->dpcd struct for addresses
> 02200h through 0220Fh, and since so much of the data is a identical,
> simply overwrite the values stored in 00000h through 0000Fh with the
> values that can be overwritten from addresses 02200h through 0220Fh.
> 
> This patch helps with backward compatibility for devices pre DP1.3.
> 
> v2: read only dpcd values which can be affected, remove incorrect check,
> split into drm include changes into separate patch, commit message,
> verbose debugging statements during overwrite.
> v3: white space fixes
> v4: make path dependent on DPCD revision > 1.2
> v5: split into function, removed DPCD rev check
> 
> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index dde92e4af5d3..ed16b93bfe40 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3731,6 +3731,58 @@ intel_dp_link_down(struct intel_encoder *encoder,
>  	}
>  }
>  
> +static void
> +intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
> +{
> +	/*
> +	 * Prior to DP1.3 the bit represented by
> +	 * DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved.
> +	 * if it is set DP_DPCD_REV at 0000h could be at a value less than
> +	 * the true capability of the panel. The only way to check is to
> +	 * then compare 0000h and 2200h.
> +	 */
> +	if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
> +	    DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT) {
> +		uint8_t dpcd_ext[6];
> +
> +		DRM_DEBUG_KMS("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n");
> +
> +		if (drm_dp_dpcd_read(&intel_dp->aux, DP_DP13_DPCD_REV,
> +				     &dpcd_ext, sizeof(dpcd_ext)) < 0)
> +			return;
> +
> +		if (intel_dp->dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV])
> +			return;

I'm still missing the debug messages here and above... 

> +
> +		if (memcmp(&intel_dp->dpcd[DP_DPCD_REV], &dpcd_ext[DP_DPCD_REV],
> +			   sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Revision previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_DPCD_REV],
> +				      dpcd_ext[DP_DPCD_REV]);
> +			memcpy(&intel_dp->dpcd[DP_DPCD_REV],
> +			       &dpcd_ext[DP_DPCD_REV], sizeof(u8));
> +		}
> +		if (memcmp(&intel_dp->dpcd[DP_MAX_LINK_RATE],
> +			   &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_MAX_LINK_RATE],
> +				      dpcd_ext[DP_MAX_LINK_RATE]);
> +			memcpy(&intel_dp->dpcd[DP_MAX_LINK_RATE],
> +			       &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8));
> +		}
> +		if (memcmp(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +			   &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT], sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Downstream Port Present  previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +				      dpcd_ext[DP_DOWNSTREAMPORT_PRESENT]);
> +			memcpy(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +			       &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT],
> +			       sizeof(u8));
> +		}
> +	}
> +}
> +
> +
>  bool
>  intel_dp_read_dpcd(struct intel_dp *intel_dp)
>  {
> @@ -3738,6 +3790,8 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp)
>  			     sizeof(intel_dp->dpcd)) < 0)
>  		return false; /* aux transfer failed */
>  
> +	intel_dp_extended_receiver_capabilities(intel_dp);
> +
>  	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
>  
>  	return intel_dp->dpcd[DP_DPCD_REV] != 0;
> -- 
> 2.17.1
>

Patch
diff mbox series

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index dde92e4af5d3..ed16b93bfe40 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3731,6 +3731,58 @@  intel_dp_link_down(struct intel_encoder *encoder,
 	}
 }
 
+static void
+intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
+{
+	/*
+	 * Prior to DP1.3 the bit represented by
+	 * DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved.
+	 * if it is set DP_DPCD_REV at 0000h could be at a value less than
+	 * the true capability of the panel. The only way to check is to
+	 * then compare 0000h and 2200h.
+	 */
+	if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
+	    DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT) {
+		uint8_t dpcd_ext[6];
+
+		DRM_DEBUG_KMS("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n");
+
+		if (drm_dp_dpcd_read(&intel_dp->aux, DP_DP13_DPCD_REV,
+				     &dpcd_ext, sizeof(dpcd_ext)) < 0)
+			return;
+
+		if (intel_dp->dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV])
+			return;
+
+		if (memcmp(&intel_dp->dpcd[DP_DPCD_REV], &dpcd_ext[DP_DPCD_REV],
+			   sizeof(u8))) {
+			DRM_DEBUG_KMS("DPCD: new value for DPCD Revision previous value %2x new value %2x\n",
+				      intel_dp->dpcd[DP_DPCD_REV],
+				      dpcd_ext[DP_DPCD_REV]);
+			memcpy(&intel_dp->dpcd[DP_DPCD_REV],
+			       &dpcd_ext[DP_DPCD_REV], sizeof(u8));
+		}
+		if (memcmp(&intel_dp->dpcd[DP_MAX_LINK_RATE],
+			   &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8))) {
+			DRM_DEBUG_KMS("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n",
+				      intel_dp->dpcd[DP_MAX_LINK_RATE],
+				      dpcd_ext[DP_MAX_LINK_RATE]);
+			memcpy(&intel_dp->dpcd[DP_MAX_LINK_RATE],
+			       &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8));
+		}
+		if (memcmp(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
+			   &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT], sizeof(u8))) {
+			DRM_DEBUG_KMS("DPCD: new value for DPCD Downstream Port Present  previous value %2x new value %2x\n",
+				      intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
+				      dpcd_ext[DP_DOWNSTREAMPORT_PRESENT]);
+			memcpy(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
+			       &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT],
+			       sizeof(u8));
+		}
+	}
+}
+
+
 bool
 intel_dp_read_dpcd(struct intel_dp *intel_dp)
 {
@@ -3738,6 +3790,8 @@  intel_dp_read_dpcd(struct intel_dp *intel_dp)
 			     sizeof(intel_dp->dpcd)) < 0)
 		return false; /* aux transfer failed */
 
+	intel_dp_extended_receiver_capabilities(intel_dp);
+
 	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
 
 	return intel_dp->dpcd[DP_DPCD_REV] != 0;