diff mbox series

[v2,05/13] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching

Message ID 20180808090543.15181-5-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show
Series [v2,01/13] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf | expand

Commit Message

Hans de Goede Aug. 8, 2018, 9:05 a.m. UTC
pulseaudio will run the DisableSequence of the current playback device
before running the EnableSequence of the new playback device.

This causes the Platform Clock and BIAS to temporarily get turned off which
on the rt5651 breaks audio-streams which are playing when switching.

This commit moves the disabling to the EnableSequence of the other device
fixing this.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 src/conf/ucm/bytcr-rt5651/HiFi.conf | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/src/conf/ucm/bytcr-rt5651/HiFi.conf b/src/conf/ucm/bytcr-rt5651/HiFi.conf
index bc604276..42fa2c9a 100644
--- a/src/conf/ucm/bytcr-rt5651/HiFi.conf
+++ b/src/conf/ucm/bytcr-rt5651/HiFi.conf
@@ -30,14 +30,19 @@  SectionDevice."Headphones" {
 		cset "name='Headphone Switch' on"
 		cset "name='HPO L Playback Switch' on"
 		cset "name='HPO R Playback Switch' on"
+		# Done after turning the HP on to keep the bias and clk on
+		cset "name='Speaker Switch' off"
+		cset "name='LOUT L Playback Switch' off"
+		cset "name='LOUT R Playback Switch' off"
 	]
 
 	DisableSequence [
 		cdev "hw:bytcrrt5651"
 		exec "echo Headphones playback disable sequence"
-		cset "name='Headphone Switch' off"
-		cset "name='HPO L Playback Switch' off"
-		cset "name='HPO R Playback Switch' off"
+		# This is done by the Speaker EnableSequence, so that the
+		# Platform Clock and BIAS do not temporarily get turned off
+		# as that breaks audio-streams which are playing when
+		# switching between Speaker/Headphone
 	]
 
 	Value {
@@ -57,12 +62,21 @@  SectionDevice."Speaker" {
 		cdev "hw:bytcrrt5651"
 		exec "echo Speaker enable sequence"
 		cset "name='Speaker Switch' on"
+		cset "name='LOUT L Playback Switch' on"
+		cset "name='LOUT R Playback Switch' on"
+		# Done after turning the speaker on to keep the bias and clk on
+		cset "name='Headphone Switch' off"
+		cset "name='HPO L Playback Switch' off"
+		cset "name='HPO R Playback Switch' off"
 	]
 
 	DisableSequence [
 		cdev "hw:bytcrrt5651"
 		exec "echo Speaker disable sequence"
-		cset "name='Speaker Switch' off"
+		# This is done by the Headphones EnableSequence, so that the
+		# Platform Clock and BIAS do not temporarily get turned off
+		# as that breaks audio-streams which are playing when
+		# switching between Speaker/Headphone
 	]
 
 	Value {