| Message ID | 20180808232941.10582-1-kieran.bingham@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] dt-bindings: media: adv748x: Document re-mappable addresses | expand |
Hi Kieran, Thank you for the patch. On Thursday, 9 August 2018 02:29:41 EEST Kieran Bingham wrote: > The ADV748x supports configurable slave addresses for its I2C pages. > Document the page names, and provide an example for setting each of the > pages explicitly. > > Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > --- > v2: > - Fix commit message > - Extend documentation for the "required property" reg: > > > .../devicetree/bindings/media/i2c/adv748x.txt | 16 ++++++++++++++-- > 1 file changed, 14 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt > b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index > 21ffb5ed8183..f7fbe221c15e 100644 > --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt > +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt > @@ -10,7 +10,11 @@ Required Properties: > - "adi,adv7481" for the ADV7481 > - "adi,adv7482" for the ADV7482 > > - - reg: I2C slave address > + - reg: I2C slave addresses > + The ADV748x has up to twelve 256-byte maps that can be accessed via the > + main I2C ports. Each map has it own I2C address and acts as a standard > + slave device on the I2C bus. The main address is mandatory, others are > + optional and revert to defaults if not specified. Maybe "revert" has a meaning I'm not aware of, but don't you mean "default" instead ? "default to defaults" probably needs to be rephrased though. > Optional Properties: > > @@ -18,6 +22,11 @@ Optional Properties: > "intrq3". All interrupts are optional. The "intrq3" interrupt > is only available on the adv7481 > - interrupts: Specify the interrupt lines for the ADV748x > + - reg-names : Names of maps with programmable addresses. > + It can contain any map needed a non-default address. I think you missed my comment to v1: s/can contain any map needed/shall contain all maps needing/ > + Possible map names are: > + "main", "dpll", "cp", "hdmi", "edid", "repeater", > + "infoframe", "cbus", "cec", "sdp", "txa", "txb" > > The device node must contain one 'port' child node per device input and > output port, in accordance with the video interface bindings defined in > @@ -47,7 +56,10 @@ Example: > > video-receiver@70 { > compatible = "adi,adv7482"; > - reg = <0x70>; > + reg = <0x70 0x71 0x72 0x73 0x74 0x75 > + 0x60 0x61 0x62 0x63 0x64 0x65>; > + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", > + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; > > #address-cells = <1>; > #size-cells = <0>;
Hi Laurent, On 09/08/18 09:22, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Thursday, 9 August 2018 02:29:41 EEST Kieran Bingham wrote: >> The ADV748x supports configurable slave addresses for its I2C pages. >> Document the page names, and provide an example for setting each of the >> pages explicitly. >> >> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> >> --- >> v2: >> - Fix commit message >> - Extend documentation for the "required property" reg: >> >> >> .../devicetree/bindings/media/i2c/adv748x.txt | 16 ++++++++++++++-- >> 1 file changed, 14 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt >> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index >> 21ffb5ed8183..f7fbe221c15e 100644 >> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt >> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt >> @@ -10,7 +10,11 @@ Required Properties: >> - "adi,adv7481" for the ADV7481 >> - "adi,adv7482" for the ADV7482 >> >> - - reg: I2C slave address >> + - reg: I2C slave addresses >> + The ADV748x has up to twelve 256-byte maps that can be accessed via the >> + main I2C ports. Each map has it own I2C address and acts as a standard >> + slave device on the I2C bus. The main address is mandatory, others are >> + optional and revert to defaults if not specified. > > Maybe "revert" has a meaning I'm not aware of, but don't you mean "default" > instead ? "default to defaults" probably needs to be rephrased though. "Revert to defaults" makes perfect sense in my head :D ... but perhaps "remains at default values" would be better? > >> Optional Properties: >> >> @@ -18,6 +22,11 @@ Optional Properties: >> "intrq3". All interrupts are optional. The "intrq3" interrupt >> is only available on the adv7481 >> - interrupts: Specify the interrupt lines for the ADV748x >> + - reg-names : Names of maps with programmable addresses. >> + It can contain any map needed a non-default address. > > I think you missed my comment to v1: > > s/can contain any map needed/shall contain all maps needing/ Ugh ... yes I did. /me shouldn't try to do easy patches at 12.30am. >> + Possible map names are: >> + "main", "dpll", "cp", "hdmi", "edid", "repeater", >> + "infoframe", "cbus", "cec", "sdp", "txa", "txb" >> >> The device node must contain one 'port' child node per device input and >> output port, in accordance with the video interface bindings defined in >> @@ -47,7 +56,10 @@ Example: >> >> video-receiver@70 { >> compatible = "adi,adv7482"; >> - reg = <0x70>; >> + reg = <0x70 0x71 0x72 0x73 0x74 0x75 >> + 0x60 0x61 0x62 0x63 0x64 0x65>; >> + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", >> + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; >> >> #address-cells = <1>; >> #size-cells = <0>; >
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index 21ffb5ed8183..f7fbe221c15e 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -10,7 +10,11 @@ Required Properties: - "adi,adv7481" for the ADV7481 - "adi,adv7482" for the ADV7482 - - reg: I2C slave address + - reg: I2C slave addresses + The ADV748x has up to twelve 256-byte maps that can be accessed via the + main I2C ports. Each map has it own I2C address and acts as a standard + slave device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. Optional Properties: @@ -18,6 +22,11 @@ Optional Properties: "intrq3". All interrupts are optional. The "intrq3" interrupt is only available on the adv7481 - interrupts: Specify the interrupt lines for the ADV748x + - reg-names : Names of maps with programmable addresses. + It can contain any map needed a non-default address. + Possible map names are: + "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" The device node must contain one 'port' child node per device input and output port, in accordance with the video interface bindings defined in @@ -47,7 +56,10 @@ Example: video-receiver@70 { compatible = "adi,adv7482"; - reg = <0x70>; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; #address-cells = <1>; #size-cells = <0>;
The ADV748x supports configurable slave addresses for its I2C pages. Document the page names, and provide an example for setting each of the pages explicitly. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> --- v2: - Fix commit message - Extend documentation for the "required property" reg: .../devicetree/bindings/media/i2c/adv748x.txt | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)