diff mbox series

[v2,37/40] arm64: dts: tegra210: Add SDHCI tap and trim values

Message ID 1533924522-1037-38-git-send-email-avienamo@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Tegra SDHCI add support for HS200 and UHS signaling | expand

Commit Message

Aapo Vienamo Aug. 10, 2018, 6:08 p.m. UTC 
Add SDHCI inbound and outbound SDHCI sampling trimmer values for
Tegra210.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 2a80f2b..0951acc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1055,6 +1055,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
 		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
 		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,default-tap = <0x2>;
+		nvidia,default-trim = <0x4>;
 		status = "disabled";
 	};
 
@@ -1068,6 +1070,8 @@ 
 		reset-names = "sdhci";
 		nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
 		nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+		nvidia,default-tap = <0x8>;
+		nvidia,default-trim = <0x0>;
 		status = "disabled";
 	};
 
@@ -1086,6 +1090,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
 		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
 		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
 		status = "disabled";
 	};
 
@@ -1099,6 +1105,8 @@ 
 		reset-names = "sdhci";
 		nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
 		nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+		nvidia,default-tap = <0x8>;
+		nvidia,default-trim = <0x0>;
 		status = "disabled";
 	};