diff mbox series

drm: stm: implement get_scanout_position function

Message ID 20180903134927.27583-1-benjamin.gaignard@linaro.org (mailing list archive)
State New, archived
Headers show
Series drm: stm: implement get_scanout_position function | expand

Commit Message

Benjamin Gaignard Sept. 3, 2018, 1:49 p.m. UTC
Hardware allow to read the position in scanout buffer so
we can use this information to make wait of vblank more accurate.

Active area bounds (start, end, total height) have already been
computed and written in ltdc registers, read them and get the
current line position to compute vpos value.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
 drivers/gpu/drm/stm/drv.c  |  2 ++
 drivers/gpu/drm/stm/ltdc.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/stm/ltdc.h |  5 +++++
 3 files changed, 52 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 8698e08313e1..ac53383350e3 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -72,6 +72,8 @@  static struct drm_driver drv_driver = {
 	.gem_prime_vmap = drm_gem_cma_prime_vmap,
 	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
 	.gem_prime_mmap = drm_gem_cma_prime_mmap,
+	.get_scanout_position = ltdc_crtc_scanoutpos,
+	.get_vblank_timestamp = drm_calc_vbltimestamp_from_scanoutpos,
 };
 
 static int drv_load(struct drm_device *ddev)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index d997a6014d6c..05b714673042 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -148,6 +148,8 @@ 
 #define IER_TERRIE	BIT(2)		/* Transfer ERRor Interrupt Enable */
 #define IER_RRIE	BIT(3)		/* Register Reload Interrupt enable */
 
+#define CPSR_CYPOS	GENMASK(15, 0)	/* Current Y position */
+
 #define ISR_LIF		BIT(0)		/* Line Interrupt Flag */
 #define ISR_FUIF	BIT(1)		/* Fifo Underrun Interrupt Flag */
 #define ISR_TERRIF	BIT(2)		/* Transfer ERRor Interrupt Flag */
@@ -622,6 +624,49 @@  static void ltdc_crtc_disable_vblank(struct drm_crtc *crtc)
 	reg_clear(ldev->regs, LTDC_IER, IER_LIE);
 }
 
+bool ltdc_crtc_scanoutpos(struct drm_device *ddev, unsigned int pipe,
+			  bool in_vblank_irq, int *vpos, int *hpos,
+			  ktime_t *stime, ktime_t *etime,
+			  const struct drm_display_mode *mode)
+{
+	struct ltdc_device *ldev = ddev->dev_private;
+	int line, vactive_start, vactive_end, vtotal;
+
+	if (stime)
+		*stime = ktime_get();
+
+	/* The active area starts after vsync + front porch and ends
+	 * at vsync + front porc + display size.
+	 * The total height also include back porch.
+	 * We have 3 possible cases to handle:
+	 * - line < vactive_start: vpos = line - vactive_start and will be
+	 * negative
+	 * - vactive_start < line < vactive_end: vpos = line - vactive_start
+	 * and will be positive
+	 * - line > vactive_end: vpos = line - vtotal - vactive_start
+	 * and will negative
+	 *
+	 * Computation for the two first cases are identical so we can
+	 * simplify the code and only test if line > vactive_end
+	 */
+	line = reg_read(ldev->regs, LTDC_CPSR) & CPSR_CYPOS;
+	vactive_start = reg_read(ldev->regs, LTDC_BPCR) & BPCR_AVBP;
+	vactive_end = reg_read(ldev->regs, LTDC_AWCR) & AWCR_AAH;
+	vtotal = reg_read(ldev->regs, LTDC_TWCR) & TWCR_TOTALH;
+
+	if (line > vactive_end)
+		*vpos = line - vtotal - vactive_start;
+	else
+		*vpos = line - vactive_start;
+
+	*hpos = 0;
+
+	if (etime)
+		*etime = ktime_get();
+
+	return true;
+}
+
 static const struct drm_crtc_funcs ltdc_crtc_funcs = {
 	.destroy = drm_crtc_cleanup,
 	.set_config = drm_atomic_helper_set_config,
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index 1e16d6afb0d2..b8c5cc41e17a 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -37,6 +37,11 @@  struct ltdc_device {
 	struct fps_info plane_fpsi[LTDC_MAX_LAYER];
 };
 
+bool ltdc_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe,
+			  bool in_vblank_irq, int *vpos, int *hpos,
+			  ktime_t *stime, ktime_t *etime,
+			  const struct drm_display_mode *mode);
+
 int ltdc_load(struct drm_device *ddev);
 void ltdc_unload(struct drm_device *ddev);