diff mbox series

[v3,2/2] drm: Add detection of changing of edid on between suspend and resume

Message ID 20180906202858.10497-2-gwan-gyeong.mun@intel.com (mailing list archive)
State New, archived
Headers show
Series [v3,1/2] drm: move a detected edid member to drm_connector from intel_connector | expand

Commit Message

Gwan-gyeong Mun Sept. 6, 2018, 8:28 p.m. UTC
The hotplug detection routine of drm_helper_hpd_irq_event() can detect
changing of status of connector, but it can not detect changing of edid.

Following scenario requires detection of changing of edid.

 1) plug display device to a connector
 2) system suspend
 3) unplug 1)'s display device and plug the other display device to a
    connector
 4) system resume

It adds edid check routine when a connector status still remains as
"connector_status_connected".

v2: Add NULL check before comparing of EDIDs.
v3: Make it as part of existing drm_helper_hpd_irq_event() (Stan, Mika)

Testcase: igt/kms_chamelium/hdmi-edid-change-during-hibernate
Testcase: igt/kms_chamelium/hdmi-edid-change-during-suspend
Testcase: igt/kms_chamelium/dp-edid-change-during-hibernate
Testcase: igt/kms_chamelium/dp-edid-change-during-suspend

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
---
 drivers/gpu/drm/drm_probe_helper.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index a1bb157bfdfa..2705a5a0e4d6 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -742,7 +742,16 @@  EXPORT_SYMBOL(drm_kms_helper_poll_fini);
  * panels.
  *
  * This helper function is useful for drivers which can't or don't track hotplug
- * interrupts for each connector.
+ * interrupts for each connector. And it also supports a detection of changing
+ * of edid on between suspend and resume when a connector status still remains
+ * as "connector_status_connected".
+ *
+ * Following scenario requires detection of changing of edid.
+ *  1) plug display device to a connector
+ *  2) system suspend
+ *  3) unplug 1)'s display device and plug the other display device to a
+       connector
+ *  4) system resume
  *
  * Drivers which support hotplug interrupts for each connector individually and
  * which have a more fine-grained detect logic should bypass this code and
@@ -760,6 +769,7 @@  bool drm_helper_hpd_irq_event(struct drm_device *dev)
 	struct drm_connector *connector;
 	struct drm_connector_list_iter conn_iter;
 	enum drm_connector_status old_status;
+	struct edid *old_edid;
 	bool changed = false;
 
 	if (!dev->mode_config.poll_enabled)
@@ -773,6 +783,7 @@  bool drm_helper_hpd_irq_event(struct drm_device *dev)
 			continue;
 
 		old_status = connector->status;
+		old_edid = connector->detect_edid;
 
 		connector->status = drm_helper_probe_detect(connector, NULL, false);
 		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
@@ -782,6 +793,22 @@  bool drm_helper_hpd_irq_event(struct drm_device *dev)
 			      drm_get_connector_status_name(connector->status));
 		if (old_status != connector->status)
 			changed = true;
+
+		/* Check changing of edid when a connector status still remains
+		 * as "connector_status_connected".
+		 */
+		if (old_status == connector->status &&
+		    old_status == connector_status_connected) {
+			if (!old_edid || !connector->detect_edid)
+				continue;
+
+			if (memcmp(old_edid, connector->detect_edid, sizeof(*old_edid))) {
+				changed = true;
+				DRM_DEBUG_KMS("[CONNECTOR:%d:%s] edid updated\n",
+					      connector->base.id,
+					      connector->name);
+			}
+		}
 	}
 	drm_connector_list_iter_end(&conn_iter);
 	mutex_unlock(&dev->mode_config.mutex);