diff mbox series

Input: pm8941-pwrkey - Add pms405 pwrkey support

Message ID 20180920014928.15422-1-bjorn.andersson@linaro.org (mailing list archive)
State New, archived
Headers show
Series Input: pm8941-pwrkey - Add pms405 pwrkey support | expand

Commit Message

Bjorn Andersson Sept. 20, 2018, 1:49 a.m. UTC
From: Vinod Koul <vkoul@kernel.org>

Update the binding and driver for pms405 pwrkey.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
 drivers/input/misc/pm8941-pwrkey.c                             | 1 +
 2 files changed, 2 insertions(+)

Comments

Vinod Koul Oct. 18, 2018, 5:24 a.m. UTC | #1
On 19-09-18, 18:49, Bjorn Andersson wrote:
> From: Vinod Koul <vkoul@kernel.org>
> 
> Update the binding and driver for pms405 pwrkey.

Rob, Dmitry

Gentle reminder for this patch...

> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
>  drivers/input/misc/pm8941-pwrkey.c                             | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> index 34ab5763f494..736fba3bad54 100644
> --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> @@ -8,6 +8,7 @@ PROPERTIES
>  	Definition: must be one of:
>  		    "qcom,pm8941-pwrkey"
>  		    "qcom,pm8941-resin"
> +		    "qcom,pms405-pwrkey"
>  
>  - reg:
>  	Usage: required
> diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> index 48153e0ca19a..fccf63263c1c 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
>  static const struct of_device_id pm8941_pwr_key_id_table[] = {
>  	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
>  	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
> +	{ .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
> -- 
> 2.18.0
Dmitry Torokhov Oct. 19, 2018, 12:01 a.m. UTC | #2
On Thu, Oct 18, 2018 at 10:54:37AM +0530, Vinod wrote:
> On 19-09-18, 18:49, Bjorn Andersson wrote:
> > From: Vinod Koul <vkoul@kernel.org>
> > 
> > Update the binding and driver for pms405 pwrkey.
> 
> Rob, Dmitry
> 
> Gentle reminder for this patch...
> 
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >  Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
> >  drivers/input/misc/pm8941-pwrkey.c                             | 1 +
> >  2 files changed, 2 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > index 34ab5763f494..736fba3bad54 100644
> > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > @@ -8,6 +8,7 @@ PROPERTIES
> >  	Definition: must be one of:
> >  		    "qcom,pm8941-pwrkey"
> >  		    "qcom,pm8941-resin"
> > +		    "qcom,pms405-pwrkey"
> >  
> >  - reg:
> >  	Usage: required
> > diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> > index 48153e0ca19a..fccf63263c1c 100644
> > --- a/drivers/input/misc/pm8941-pwrkey.c
> > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > @@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
> >  static const struct of_device_id pm8941_pwr_key_id_table[] = {
> >  	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> >  	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
> > +	{ .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },

I am sure I asked this question before (in context of a different
driver), but why do we need this compatible if we already have
pm8941-pwrkey compatible? Isn't pms405-pwrkey compatible with
pm8941-pwrkey as far as power key block goes? In which cases do we need
new compatibles and when can we reuse existing ones? Rob?

Thanks.
Vinod Koul Oct. 19, 2018, 9:05 a.m. UTC | #3
On 18-10-18, 17:01, Dmitry Torokhov wrote:
> On Thu, Oct 18, 2018 at 10:54:37AM +0530, Vinod wrote:
> > On 19-09-18, 18:49, Bjorn Andersson wrote:
> > > From: Vinod Koul <vkoul@kernel.org>
> > > 
> > > Update the binding and driver for pms405 pwrkey.
> > 
> > Rob, Dmitry
> > 
> > Gentle reminder for this patch...
> > 
> > > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > ---
> > >  Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
> > >  drivers/input/misc/pm8941-pwrkey.c                             | 1 +
> > >  2 files changed, 2 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > > index 34ab5763f494..736fba3bad54 100644
> > > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > > @@ -8,6 +8,7 @@ PROPERTIES
> > >  	Definition: must be one of:
> > >  		    "qcom,pm8941-pwrkey"
> > >  		    "qcom,pm8941-resin"
> > > +		    "qcom,pms405-pwrkey"
> > >  
> > >  - reg:
> > >  	Usage: required
> > > diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> > > index 48153e0ca19a..fccf63263c1c 100644
> > > --- a/drivers/input/misc/pm8941-pwrkey.c
> > > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > > @@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
> > >  static const struct of_device_id pm8941_pwr_key_id_table[] = {
> > >  	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> > >  	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
> > > +	{ .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
> 
> I am sure I asked this question before (in context of a different
> driver), but why do we need this compatible if we already have
> pm8941-pwrkey compatible? Isn't pms405-pwrkey compatible with
> pm8941-pwrkey as far as power key block goes? In which cases do we need
> new compatibles and when can we reuse existing ones? Rob?

Relooking I do think that reuse of pm8941-pwrkey is entirely feasible,
thanks for the suggestion. We can drop this and I will update DTS
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index 34ab5763f494..736fba3bad54 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -8,6 +8,7 @@  PROPERTIES
 	Definition: must be one of:
 		    "qcom,pm8941-pwrkey"
 		    "qcom,pm8941-resin"
+		    "qcom,pms405-pwrkey"
 
 - reg:
 	Usage: required
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 48153e0ca19a..fccf63263c1c 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -317,6 +317,7 @@  static const struct pm8941_data resin_data = {
 static const struct of_device_id pm8941_pwr_key_id_table[] = {
 	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
 	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
+	{ .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);