[v4] ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
diff mbox series

Message ID 20180928060442.24312-1-vigneshr@ti.com
State New
Headers show
Series
  • [v4] ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
Related show

Commit Message

Vignesh Raghavendra Sept. 28, 2018, 6:04 a.m. UTC
Add ti,syscon-unaligned-access property to PCIe RC nodes to set
appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for
errata i870.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
This patch is split from v3 here:
https://lore.kernel.org/patchwork/cover/967020/
Dependent DT binding documentation and driver changes are now merged via
PCI tree and part of next-20180928

 arch/arm/boot/dts/dra7.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Tony Lindgren Sept. 28, 2018, 5:27 p.m. UTC | #1
* Vignesh R <vigneshr@ti.com> [180927 23:08]:
> Add ti,syscon-unaligned-access property to PCIe RC nodes to set
> appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for
> errata i870.
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
> This patch is split from v3 here:
> https://lore.kernel.org/patchwork/cover/967020/
> Dependent DT binding documentation and driver changes are now merged via
> PCI tree and part of next-20180928

OK thanks applying into omap-for-v4.20/dt.

Tony

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9136b3cf9a2c..7ce24b282d42 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -336,6 +336,7 @@ 
 						<0 0 0 2 &pcie1_intc 2>,
 						<0 0 0 3 &pcie1_intc 3>,
 						<0 0 0 4 &pcie1_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 				status = "disabled";
 				pcie1_intc: interrupt-controller {
 					interrupt-controller;
@@ -387,6 +388,7 @@ 
 						<0 0 0 2 &pcie2_intc 2>,
 						<0 0 0 3 &pcie2_intc 3>,
 						<0 0 0 4 &pcie2_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 				pcie2_intc: interrupt-controller {
 					interrupt-controller;
 					#address-cells = <0>;