| Message ID | 20181003091827.25276-6-daniel.vetter@ffwll.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | atomic helper cleanups | expand |
On Wed, Oct 03, 2018 at 11:18:27AM +0200, Daniel Vetter wrote: > Well except the destroy helper, which isn't really a primary helper > but generally useful, if mislabelled. > > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> > --- > drivers/gpu/drm/drm_plane_helper.c | 85 ++++-------------------------- > include/drm/drm_plane_helper.h | 10 ---- > 2 files changed, 11 insertions(+), 84 deletions(-) > > diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c > index 33b3e6892787..0fff72dcd06d 100644 > --- a/drivers/gpu/drm/drm_plane_helper.c > +++ b/drivers/gpu/drm/drm_plane_helper.c > @@ -42,11 +42,8 @@ > * primary plane support on top of the normal CRTC configuration interface. > * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary > * plane together with the CRTC state this does not allow userspace to disable > - * the primary plane itself. To avoid too much duplicated code use > - * drm_plane_helper_check_update() which can be used to enforce the same > - * restrictions as primary planes had thus. The default primary plane only > - * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached > - * framebuffer. > + * the primary plane itself. The default primary plane only expose XRBG8888 and > + * ARGB8888 as valid pixel formats for the attached framebuffer. > * > * Drivers are highly recommended to implement proper support for primary > * planes, and newly merged drivers must not rely upon these transitional > @@ -148,50 +145,13 @@ static int drm_plane_helper_check_update(struct drm_plane *plane, > return 0; > } > > -/** > - * drm_primary_helper_update() - Helper for primary plane update > - * @plane: plane object to update > - * @crtc: owning CRTC of owning plane > - * @fb: framebuffer to flip onto plane > - * @crtc_x: x offset of primary plane on crtc > - * @crtc_y: y offset of primary plane on crtc > - * @crtc_w: width of primary plane rectangle on crtc > - * @crtc_h: height of primary plane rectangle on crtc > - * @src_x: x offset of @fb for panning > - * @src_y: y offset of @fb for panning > - * @src_w: width of source rectangle in @fb > - * @src_h: height of source rectangle in @fb > - * @ctx: lock acquire context, not used here > - * > - * Provides a default plane update handler for primary planes. This is handler > - * is called in response to a userspace SetPlane operation on the plane with a > - * non-NULL framebuffer. We call the driver's modeset handler to update the > - * framebuffer. > - * > - * SetPlane() on a primary plane of a disabled CRTC is not supported, and will > - * return an error. > - * > - * Note that we make some assumptions about hardware limitations that may not be > - * true for all hardware -- > - * > - * 1. Primary plane cannot be repositioned. > - * 2. Primary plane cannot be scaled. > - * 3. Primary plane must cover the entire CRTC. > - * 4. Subpixel positioning is not supported. > - * > - * Drivers for hardware that don't have these restrictions can provide their > - * own implementation rather than using this helper. > - * > - * RETURNS: > - * Zero on success, error code on failure > - */ > -int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, > - struct drm_framebuffer *fb, > - int crtc_x, int crtc_y, > - unsigned int crtc_w, unsigned int crtc_h, > - uint32_t src_x, uint32_t src_y, > - uint32_t src_w, uint32_t src_h, > - struct drm_modeset_acquire_ctx *ctx) > +static int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, > + struct drm_framebuffer *fb, > + int crtc_x, int crtc_y, > + unsigned int crtc_w, unsigned int crtc_h, > + uint32_t src_x, uint32_t src_y, > + uint32_t src_w, uint32_t src_h, > + struct drm_modeset_acquire_ctx *ctx) > { > struct drm_mode_set set = { > .crtc = crtc, > @@ -258,35 +218,12 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, > kfree(connector_list); > return ret; > } > -EXPORT_SYMBOL(drm_primary_helper_update); > > -/** > - * drm_primary_helper_disable() - Helper for primary plane disable > - * @plane: plane to disable > - * @ctx: lock acquire context, not used here > - * > - * Provides a default plane disable handler for primary planes. This is handler > - * is called in response to a userspace SetPlane operation on the plane with a > - * NULL framebuffer parameter. It unconditionally fails the disable call with > - * -EINVAL the only way to disable the primary plane without driver support is > - * to disable the entire CRTC. Which does not match the plane > - * &drm_plane_funcs.disable_plane hook. > - * > - * Note that some hardware may be able to disable the primary plane without > - * disabling the whole CRTC. Drivers for such hardware should provide their > - * own disable handler that disables just the primary plane (and they'll likely > - * need to provide their own update handler as well to properly re-enable a > - * disabled primary plane). > - * > - * RETURNS: > - * Unconditionally returns -EINVAL. > - */ > -int drm_primary_helper_disable(struct drm_plane *plane, > - struct drm_modeset_acquire_ctx *ctx) > +static int drm_primary_helper_disable(struct drm_plane *plane, > + struct drm_modeset_acquire_ctx *ctx) > { > return -EINVAL; > } > -EXPORT_SYMBOL(drm_primary_helper_disable); > > /** > * drm_primary_helper_destroy() - Helper for primary plane destruction > diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h > index 7bff930b8b10..331ebd60b3a3 100644 > --- a/include/drm/drm_plane_helper.h > +++ b/include/drm/drm_plane_helper.h > @@ -38,16 +38,6 @@ > */ > #define DRM_PLANE_HELPER_NO_SCALING (1<<16) > > -int drm_primary_helper_update(struct drm_plane *plane, > - struct drm_crtc *crtc, > - struct drm_framebuffer *fb, > - int crtc_x, int crtc_y, > - unsigned int crtc_w, unsigned int crtc_h, > - uint32_t src_x, uint32_t src_y, > - uint32_t src_w, uint32_t src_h, > - struct drm_modeset_acquire_ctx *ctx); > -int drm_primary_helper_disable(struct drm_plane *plane, > - struct drm_modeset_acquire_ctx *ctx); Cool. Less things to snare people by accident. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > void drm_primary_helper_destroy(struct drm_plane *plane); > extern const struct drm_plane_funcs drm_primary_helper_funcs; > > -- > 2.19.0.rc2 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c index 33b3e6892787..0fff72dcd06d 100644 --- a/drivers/gpu/drm/drm_plane_helper.c +++ b/drivers/gpu/drm/drm_plane_helper.c @@ -42,11 +42,8 @@ * primary plane support on top of the normal CRTC configuration interface. * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary * plane together with the CRTC state this does not allow userspace to disable - * the primary plane itself. To avoid too much duplicated code use - * drm_plane_helper_check_update() which can be used to enforce the same - * restrictions as primary planes had thus. The default primary plane only - * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached - * framebuffer. + * the primary plane itself. The default primary plane only expose XRBG8888 and + * ARGB8888 as valid pixel formats for the attached framebuffer. * * Drivers are highly recommended to implement proper support for primary * planes, and newly merged drivers must not rely upon these transitional @@ -148,50 +145,13 @@ static int drm_plane_helper_check_update(struct drm_plane *plane, return 0; } -/** - * drm_primary_helper_update() - Helper for primary plane update - * @plane: plane object to update - * @crtc: owning CRTC of owning plane - * @fb: framebuffer to flip onto plane - * @crtc_x: x offset of primary plane on crtc - * @crtc_y: y offset of primary plane on crtc - * @crtc_w: width of primary plane rectangle on crtc - * @crtc_h: height of primary plane rectangle on crtc - * @src_x: x offset of @fb for panning - * @src_y: y offset of @fb for panning - * @src_w: width of source rectangle in @fb - * @src_h: height of source rectangle in @fb - * @ctx: lock acquire context, not used here - * - * Provides a default plane update handler for primary planes. This is handler - * is called in response to a userspace SetPlane operation on the plane with a - * non-NULL framebuffer. We call the driver's modeset handler to update the - * framebuffer. - * - * SetPlane() on a primary plane of a disabled CRTC is not supported, and will - * return an error. - * - * Note that we make some assumptions about hardware limitations that may not be - * true for all hardware -- - * - * 1. Primary plane cannot be repositioned. - * 2. Primary plane cannot be scaled. - * 3. Primary plane must cover the entire CRTC. - * 4. Subpixel positioning is not supported. - * - * Drivers for hardware that don't have these restrictions can provide their - * own implementation rather than using this helper. - * - * RETURNS: - * Zero on success, error code on failure - */ -int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int crtc_x, int crtc_y, - unsigned int crtc_w, unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h, - struct drm_modeset_acquire_ctx *ctx) +static int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, + struct drm_framebuffer *fb, + int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h, + struct drm_modeset_acquire_ctx *ctx) { struct drm_mode_set set = { .crtc = crtc, @@ -258,35 +218,12 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, kfree(connector_list); return ret; } -EXPORT_SYMBOL(drm_primary_helper_update); -/** - * drm_primary_helper_disable() - Helper for primary plane disable - * @plane: plane to disable - * @ctx: lock acquire context, not used here - * - * Provides a default plane disable handler for primary planes. This is handler - * is called in response to a userspace SetPlane operation on the plane with a - * NULL framebuffer parameter. It unconditionally fails the disable call with - * -EINVAL the only way to disable the primary plane without driver support is - * to disable the entire CRTC. Which does not match the plane - * &drm_plane_funcs.disable_plane hook. - * - * Note that some hardware may be able to disable the primary plane without - * disabling the whole CRTC. Drivers for such hardware should provide their - * own disable handler that disables just the primary plane (and they'll likely - * need to provide their own update handler as well to properly re-enable a - * disabled primary plane). - * - * RETURNS: - * Unconditionally returns -EINVAL. - */ -int drm_primary_helper_disable(struct drm_plane *plane, - struct drm_modeset_acquire_ctx *ctx) +static int drm_primary_helper_disable(struct drm_plane *plane, + struct drm_modeset_acquire_ctx *ctx) { return -EINVAL; } -EXPORT_SYMBOL(drm_primary_helper_disable); /** * drm_primary_helper_destroy() - Helper for primary plane destruction diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h index 7bff930b8b10..331ebd60b3a3 100644 --- a/include/drm/drm_plane_helper.h +++ b/include/drm/drm_plane_helper.h @@ -38,16 +38,6 @@ */ #define DRM_PLANE_HELPER_NO_SCALING (1<<16) -int drm_primary_helper_update(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int crtc_x, int crtc_y, - unsigned int crtc_w, unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h, - struct drm_modeset_acquire_ctx *ctx); -int drm_primary_helper_disable(struct drm_plane *plane, - struct drm_modeset_acquire_ctx *ctx); void drm_primary_helper_destroy(struct drm_plane *plane); extern const struct drm_plane_funcs drm_primary_helper_funcs;
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> --- drivers/gpu/drm/drm_plane_helper.c | 85 ++++-------------------------- include/drm/drm_plane_helper.h | 10 ---- 2 files changed, 11 insertions(+), 84 deletions(-)