arm64: dts: qcom: sdm845: Add qspi (quad SPI) node

Commit Message

Doug Anderson Oct. 5, 2018, 1:59 a.m. UTC

This adds the Quad SPI controller to the main sdm845 device tree file.
Boards will be expected to assign the proper pinctrl depending on how
many chip selects they have hooked up and how many data lines.

This depends on commit 48735597f7bd ("clk: qcom: Add qspi (Quad SPI)
clock defines for sdm845 to header") to add the needed defines.  It
also shouldn't land until the patch ("dt-bindings: spi: Qualcomm Quad
SPI(QSPI) documentation") [1] lands.

[1] https://lkml.kernel.org/r/[e-mail]

Signed-off-by: Douglas Anderson <[e-mail]>
---

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 47 ++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

Comments

Doug Anderson Oct. 8, 2018, 7:55 p.m. UTC | #1

Hi,

On Thu, Oct 4, 2018 at 6:59 PM Douglas Anderson <[e-mail]> wrote:
> +               qspi: qspi@88df000 {

Whoops!  Just re-read over the version history of the driver and
realized that Rob H. wanted the node name to be spi@, not qspi@.
Version 2 coming up.

-Doug

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0a31a5..cfc96262e8dd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -822,6 +822,41 @@ 
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			qspi_clk: qspi-clk {
+				pinmux {
+					pins = "gpio95";
+					function = "qspi_clk";
+				};
+			};
+
+			qspi_cs0: qspi-cs0 {
+				pinmux {
+					pins = "gpio90";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_cs1: qspi-cs1 {
+				pinmux {
+					pins = "gpio89";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_data01: qspi-data01 {
+				pinmux-data {
+					pins = "gpio91", "gpio92";
+					function = "qspi_data";
+				};
+			};
+
+			qspi_data12: qspi-data12 {
+				pinmux-data {
+					pins = "gpio93", "gpio94";
+					function = "qspi_data";
+				};
+			};
+
 			qup_i2c0_default: qup-i2c0-default {
 				pinmux {
 					pins = "gpio0", "gpio1";
@@ -1070,6 +1105,18 @@ 
 			};
 		};
 
+		qspi: qspi@88df000 {
+			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+			reg = <0x88df000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			status = "disabled";
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm845-qusb2-phy";
 			reg = <0x88e2000 0x400>;