diff mbox series

[RFC,08/11] ARM: dts: am4372: switch to use phy-gmii-sel

Message ID 20181008234949.15416-9-grygorii.strashko@ti.com (mailing list archive)
State New, archived
Headers show
Series net: ethernet: ti: cpsw: replace cpsw-phy-sel with phy driver | expand

Commit Message

Grygorii Strashko Oct. 8, 2018, 11:49 p.m. UTC 
Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi        | 16 +++++++++-------
 arch/arm/boot/dts/am43x-epos-evm.dts |  5 +----
 2 files changed, 10 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d4b7c59..3dd6d2e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -212,11 +212,17 @@ 
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am43xx-phy-gmii-sel";
+						syscon-scm = <&scm_conf>;
+						#phy-cells = <2>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -714,17 +720,13 @@ 
 			cpsw_emac0: slave@4a100200 {
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
+				phys = <&phy_gmii_sel 1 0>;
 			};
 
 			cpsw_emac1: slave@4a100300 {
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am43xx-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
+				phys = <&phy_gmii_sel 2 0>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 6502d33..8677f4a 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -580,10 +580,7 @@ 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <16>;
 	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
+	phys = <&phy_gmii_sel 1 1>;
 };
 
 &i2c0 {