@@ -209,14 +209,15 @@ uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req)
struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
if (uvc->event_setup_out) {
- uvc->event_setup_out = 0;
-
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_DATA;
uvc_event->data.length = req->actual;
memcpy(&uvc_event->data.data, req->buf, req->actual);
memcpy(&uvc_event->data.setup, &uvc->control_setup,
sizeof(uvc_event->data.setup));
+
+ usb_ep_delay_status(ep);
+
v4l2_event_queue(&uvc->vdev, &v4l2_event);
}
}
@@ -37,10 +37,24 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
/*
* For control OUT transfers the request has been enqueued synchronously
- * by the setup handler, there's nothing to be done here.
+ * by the setup handler, we just need to tell the UDC whether to ACK or
+ * STALL the control transfer.
*/
- if (uvc->event_setup_out)
- return 0;
+ if (uvc->event_setup_out) {
+ struct usb_ep *ep = cdev->gadget->ep0;
+ bool stall = data->length < 0;
+
+ /*
+ * The length field carries the control request status.
+ * Negative values signal a STALL and zero values an ACK.
+ * Positive values are not valid as there is no data to send
+ * back in the status stage.
+ */
+ if (data->length > 0)
+ return -EINVAL;
+
+ return usb_ep_send_response(ep, stall);
+ }
if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);
@@ -1369,6 +1369,11 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
driver->function);
+ if (!udc->gadget->ep0->ops->send_response) {
+ dev_warn(&udc->dev, "UDC doesn't implement send_response\n");
+ dev_warn(&udc->dev, "Proper operation can't be guaranteed\n");
+ }
+
udc->driver = driver;
udc->dev.driver = &driver->driver;
udc->gadget->dev.driver = &driver->driver;
We now have a mechanism to signal the UDC driver to reply to a control OUT request with STALL or ACK, and we have packaged the setup stage data and the data stage data of a control OUT request into a single UVC_EVENT_DATA for userspace to consume. The ioctl UVCIOC_SEND_RESPONSE in the case of a control OUT request sends a response to the data stage, and so the ioctl now notifies the UDC driver to reply with STALL or ACK. In the case of a control IN request, the ioctl sends the UVC data as before. Also tell the UDC to delay the status stage for this to work. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> --- drivers/usb/gadget/function/f_uvc.c | 5 +++-- drivers/usb/gadget/function/uvc_v4l2.c | 20 +++++++++++++++++--- drivers/usb/gadget/udc/core.c | 5 +++++ 3 files changed, 25 insertions(+), 5 deletions(-)