diff mbox series

[4/8] pci: consolidate PCI config entry in drivers/pci

Message ID 20181013151016.31674-5-hch@lst.de (mailing list archive)
State New, archived
Headers show
Series [1/8] aha152x: rename the PCMCIA define | expand

Commit Message

Christoph Hellwig Oct. 13, 2018, 3:10 p.m. UTC 
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAS_PCI symbol that indicates availability
of PCI support and the handle the rest in drivers/pci.

Note that for powerpc we now select HAS_PCI globally instead of the
convoluted mess of conditional or or non-conditional support per board,
similar to what we do e.g. on x86.  For alpha PCI is selected for the
non-jensen configs as it was the default before, and a lot of code does
not compile without PCI enabled.  On other architectures with limited
PCI support that wasn't as complicated I've left the selection as-is.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/alpha/Kconfig                     | 15 ++-------
 arch/arc/Kconfig                       | 20 ------------
 arch/arc/plat-axs10x/Kconfig           |  2 +-
 arch/arc/plat-hsdk/Kconfig             |  2 +-
 arch/arm/Kconfig                       | 19 ++----------
 arch/arm/mach-ks8695/Kconfig           | 10 +++---
 arch/arm/mach-pxa/Kconfig              |  2 +-
 arch/arm64/Kconfig                     | 10 +-----
 arch/hexagon/Kconfig                   |  3 --
 arch/ia64/Kconfig                      |  9 +-----
 arch/m68k/Kconfig.bus                  | 11 -------
 arch/m68k/Kconfig.cpu                  |  1 +
 arch/microblaze/Kconfig                |  6 +---
 arch/mips/Kconfig                      | 43 +++++++++-----------------
 arch/mips/alchemy/Kconfig              |  6 ++--
 arch/mips/ath25/Kconfig                |  2 +-
 arch/mips/ath79/Kconfig                |  8 ++---
 arch/mips/bcm63xx/Kconfig              | 14 ++++-----
 arch/mips/lantiq/Kconfig               |  2 +-
 arch/mips/loongson64/Kconfig           |  6 ++--
 arch/mips/pmcs-msp71xx/Kconfig         | 10 +++---
 arch/mips/ralink/Kconfig               |  8 ++---
 arch/mips/sibyte/Kconfig               | 10 +++---
 arch/mips/txx9/Kconfig                 |  8 ++---
 arch/mips/vr41xx/Kconfig               |  8 ++---
 arch/parisc/Kconfig                    |  1 +
 arch/powerpc/Kconfig                   | 25 ++++-----------
 arch/powerpc/platforms/44x/Kconfig     |  2 +-
 arch/powerpc/platforms/512x/Kconfig    |  2 +-
 arch/powerpc/platforms/52xx/Kconfig    |  2 +-
 arch/powerpc/platforms/83xx/Kconfig    |  2 +-
 arch/powerpc/platforms/85xx/Kconfig    |  2 +-
 arch/powerpc/platforms/86xx/Kconfig    |  4 +--
 arch/powerpc/platforms/Kconfig         |  2 +-
 arch/powerpc/platforms/Kconfig.cputype |  4 +--
 arch/powerpc/platforms/ps3/Kconfig     |  2 +-
 arch/riscv/Kconfig                     | 17 +---------
 arch/s390/Kconfig                      | 23 +++++---------
 arch/sh/Kconfig                        | 19 ++----------
 arch/sh/boards/Kconfig                 | 30 +++++++++---------
 arch/sparc/Kconfig                     | 15 +--------
 arch/um/Kconfig                        |  3 --
 arch/unicore32/Kconfig                 | 11 +------
 arch/x86/Kconfig                       | 12 +------
 arch/xtensa/Kconfig                    | 16 +---------
 drivers/Kconfig                        |  4 +++
 drivers/parisc/Kconfig                 | 11 -------
 drivers/pci/Kconfig                    | 12 +++++++
 48 files changed, 139 insertions(+), 317 deletions(-)

Comments

Masahiro Yamada Oct. 15, 2018, 6:37 a.m. UTC | #1 
On Sun, Oct 14, 2018 at 12:11 AM Christoph Hellwig <hch@lst.de> wrote:
>
> There is no good reason to duplicate the PCI menu in every architecture.
> Instead provide a selectable HAS_PCI symbol that indicates availability
> of PCI support and the handle the rest in drivers/pci.


I think HAVE_ is a preferred prefix in this case according to this doc:
https://github.com/masahir0y/linux/blob/v4.19-rc4/Documentation/kbuild/kconfig-language.txt#L448


It is true we have some options with HAS_ prefix,
but the majority is HAVE_.

masahiro@pug:~/ref/linux$ find . -name 'Kconfig*' | xargs grep 'config
HAS_' | wc
      9      18     355
masahiro@pug:~/ref/linux$ find . -name 'Kconfig*' | xargs grep 'config
HAVE_' | wc
    177     354    8182





> Note that for powerpc we now select HAS_PCI globally instead of the
> convoluted mess of conditional or or non-conditional support per board,
> similar to what we do e.g. on x86.  For alpha PCI is selected for the
> non-jensen configs as it was the default before, and a lot of code does
> not compile without PCI enabled.  On other architectures with limited
> PCI support that wasn't as complicated I've left the selection as-is.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---



> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 6fa6f92edb7f..0713375e1127 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -168,10 +168,16 @@ config PPC
>         select GENERIC_CPU_VULNERABILITIES      if PPC_BARRIER_NOSPEC
>         select GENERIC_IRQ_SHOW
>         select GENERIC_IRQ_SHOW_LEVEL
> +       select GENERIC_PCI_IOMAP                if PCI
>         select GENERIC_SMP_IDLE_THREAD
>         select GENERIC_STRNCPY_FROM_USER
>         select GENERIC_STRNLEN_USER
>         select GENERIC_TIME_VSYSCALL
> +       # Platforms that what PCI turned unconditionally just do select PCI
> +       # in their config node, otherwise allow the user to enable it.
> +       # This means we can enable PCI even on platforms that don't support
> +       # it, which is harmless except for wasted memory.
> +       select HAS_PCI


If you do this for entire powerpc,
the other 'select HAS_PCI' addtions to
arch/powerpc/platforms/*/Kconfig look redundant.





> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index a344980287a5..6eb31a0698ac 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -38,6 +38,7 @@ config RISCV
>         select RISCV_ISA_A if SMP
>         select SPARSE_IRQ
>         select SYSCTL_EXCEPTION_TRACE
> +       select HAS_PCI
>         select HAVE_ARCH_TRACEHOOK
>         select MODULES_USE_ELF_RELA if MODULES
>         select THREAD_INFO_IN_TASK
> @@ -216,28 +217,12 @@ source "kernel/Kconfig.hz"
>
>  endmenu
>
> -menu "Bus support"
> -
> -config PCI
> -       bool "PCI support"
> -       select PCI_MSI


I think this 'select PCI_MSI' for riscv was lost.




> -       help
> -         This feature enables support for PCI bus system. If you say Y
> -         here, the kernel will include drivers and infrastructure code
> -         to support PCI bus devices.
> -
> -         If you don't know what to do here, say Y.
> -
>  config PCI_DOMAINS
>         def_bool PCI
>
>  config PCI_DOMAINS_GENERIC
>         def_bool PCI
>
> -source "drivers/pci/Kconfig"
> -
> -endmenu
> -
>  menu "Power management options"
>
>  source kernel/power/Kconfig



> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 1a0be022f91d..7cbc656f47e7 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -113,6 +113,7 @@ config X86
>         select GENERIC_STRNLEN_USER
>         select GENERIC_TIME_VSYSCALL
>         select HARDLOCKUP_CHECK_TIMESTAMP       if X86_64
> +       select HAS_PCI
>         select HAVE_ACPI_APEI                   if ACPI
>         select HAVE_ACPI_APEI_NMI               if ACPI
>         select HAVE_ALIGNED_STRUCT_PAGE         if SLUB
> @@ -2567,15 +2568,6 @@ endmenu
>
>  menu "Bus options (PCI etc.)"
>
> -config PCI
> -       bool "PCI support"
> -       default y


The default is y for x86 (and xtensa as well).

With this patch, the default will be flipped.

I think most of people want to use PCI for x86,
and this change will make people upset.

Will you update arch/{x86,xtensa}/configs/*_defconfig?






> -       ---help---
> -         Find out whether you have a PCI motherboard. PCI is the name of a
> -         bus system, i.e. the way the CPU talks to the other stuff inside
> -         your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
> -         VESA. If you have PCI, say Y, otherwise N.
> -
>  choice
>         prompt "PCI access mode"
>         depends on X86_32 && PCI
> @@ -2658,8 +2650,6 @@ config PCI_CNB20LE_QUIRK
>
>           You should say N unless you know you need this.
>
> -source "drivers/pci/Kconfig"
> -
>  config ISA_BUS
>         bool "ISA bus support on modern systems" if EXPERT
>         help
> diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
> index b9ad83a0ee5d..22abeb236863 100644
> --- a/arch/xtensa/Kconfig
> +++ b/arch/xtensa/Kconfig
> @@ -20,6 +20,7 @@ config XTENSA
>         select GENERIC_PCI_IOMAP
>         select GENERIC_SCHED_CLOCK
>         select GENERIC_STRNCPY_FROM_USER if KASAN
> +       select HAS_PCI
>         select HAVE_ARCH_KASAN if MMU
>         select HAVE_DEBUG_KMEMLEAK
>         select HAVE_DMA_CONTIGUOUS
> @@ -384,21 +385,6 @@ config XTENSA_CALIBRATE_CCOUNT
>  config SERIAL_CONSOLE
>         def_bool n
>
> -menu "Bus options"
> -
> -config PCI
> -       bool "PCI support"
> -       default y
> -       help
> -         Find out whether you have a PCI motherboard. PCI is the name of a
> -         bus system, i.e. the way the CPU talks to the other stuff inside
> -         your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
> -         VESA. If you have PCI, say Y, otherwise N.
> -
> -source "drivers/pci/Kconfig"
> -
> -endmenu
> -
>  menu "Platform options"
>
>  choice
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index ab4d43923c4d..059573823387 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -1,7 +1,11 @@
>  # SPDX-License-Identifier: GPL-2.0
>  menu "Device Drivers"
>
> +# Keep I/O buses first
> +
>  source "drivers/amba/Kconfig"
> +source "drivers/pci/Kconfig"
> +
>
>  source "drivers/base/Kconfig"
>
> diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
> index 5a48b5606110..5bbfea1a019c 100644
> --- a/drivers/parisc/Kconfig
> +++ b/drivers/parisc/Kconfig
> @@ -63,17 +63,6 @@ config ISA
>           If you want to plug an ISA card into your EISA bus, say Y here.
>           Most people should say N.
>
> -config PCI
> -       bool "PCI support"
> -       help
> -         All recent HP machines have PCI slots, and you should say Y here
> -         if you have a recent machine.  If you are convinced you do not have
> -         PCI slots in your machine (eg a 712), then you may say "N" here.
> -         Beware that some GSC cards have a Dino onboard and PCI inside them,
> -         so it may be safest to say "Y" anyway.
> -
> -source "drivers/pci/Kconfig"
> -
>  config GSC_DINO
>         bool "GSCtoPCI/Dino PCI support"
>         depends on PCI && GSC
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 56ff8f6d31fc..229a518b68cd 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -3,6 +3,18 @@
>  # PCI configuration
>  #
>
> +config HAS_PCI
> +       bool
> +
> +menuconfig PCI
> +       bool "PCI support"
> +       depends on HAS_PCI
> +
> +       help
> +         This option enables support for the PCI local bus, including
> +         support for PCI-X and the fundations for PCI Express support.
> +         Say 'Y' here unless you know what you are doing.
> +
>  source "drivers/pci/pcie/Kconfig"
>
>  config PCI_MSI
> --
> 2.19.1
>


--
Best Regards
Masahiro Yamada
Christoph Hellwig Oct. 15, 2018, 8:57 a.m. UTC | #2 
On Mon, Oct 15, 2018 at 03:37:05PM +0900, Masahiro Yamada wrote:
> I think HAVE_ is a preferred prefix in this case according to this doc:
> https://github.com/masahir0y/linux/blob/v4.19-rc4/Documentation/kbuild/kconfig-language.txt#L448

Ok, I'll switch everything to HAVE_*

> If you do this for entire powerpc,
> the other 'select HAS_PCI' addtions to
> arch/powerpc/platforms/*/Kconfig look redundant.

I'll drop them.

> > -config PCI
> > -       bool "PCI support"
> > -       select PCI_MSI
> 
> 
> I think this 'select PCI_MSI' for riscv was lost.

Indeed, fixed.

> >  menu "Bus options (PCI etc.)"
> >
> > -config PCI
> > -       bool "PCI support"
> > -       default y
> 
> 
> The default is y for x86 (and xtensa as well).
> 
> With this patch, the default will be flipped.
> 
> I think most of people want to use PCI for x86,
> and this change will make people upset.
> 
> Will you update arch/{x86,xtensa}/configs/*_defconfig?

Yes.  Alternatively we could add a new ARCH_PCI_DEFAULT symbol,
that architectures could select if they want PCI by default.  Does
anyone thing this is a good idea?
Masahiro Yamada Oct. 15, 2018, 9:17 a.m. UTC | #3 
On Mon, Oct 15, 2018 at 5:57 PM Christoph Hellwig <hch@lst.de> wrote:
>
> On Mon, Oct 15, 2018 at 03:37:05PM +0900, Masahiro Yamada wrote:
> > I think HAVE_ is a preferred prefix in this case according to this doc:
> > https://github.com/masahir0y/linux/blob/v4.19-rc4/Documentation/kbuild/kconfig-language.txt#L448
>
> Ok, I'll switch everything to HAVE_*
>
> > If you do this for entire powerpc,
> > the other 'select HAS_PCI' addtions to
> > arch/powerpc/platforms/*/Kconfig look redundant.
>
> I'll drop them.
>
> > > -config PCI
> > > -       bool "PCI support"
> > > -       select PCI_MSI
> >
> >
> > I think this 'select PCI_MSI' for riscv was lost.
>
> Indeed, fixed.
>
> > >  menu "Bus options (PCI etc.)"
> > >
> > > -config PCI
> > > -       bool "PCI support"
> > > -       default y
> >
> >
> > The default is y for x86 (and xtensa as well).
> >
> > With this patch, the default will be flipped.
> >
> > I think most of people want to use PCI for x86,
> > and this change will make people upset.
> >
> > Will you update arch/{x86,xtensa}/configs/*_defconfig?
>
> Yes.  Alternatively we could add a new ARCH_PCI_DEFAULT symbol,
> that architectures could select if they want PCI by default.  Does
> anyone thing this is a good idea?


No, I do not want to see such an ugly config option.

Instead, you can use 'imply' keyword to set the default y.

config X86
       ...
       imply    PCI



But, personally, I'd like the defconfig files updated.
Bjorn Helgaas Oct. 15, 2018, 8:58 p.m. UTC | #4 
s/^pci: /PCI: / in subject

On Sat, Oct 13, 2018 at 05:10:12PM +0200, Christoph Hellwig wrote:
> There is no good reason to duplicate the PCI menu in every architecture.
> Instead provide a selectable HAS_PCI symbol that indicates availability
> of PCI support and the handle the rest in drivers/pci.
> 
> Note that for powerpc we now select HAS_PCI globally instead of the
> convoluted mess of conditional or or non-conditional support per board,
> similar to what we do e.g. on x86.  For alpha PCI is selected for the
> non-jensen configs as it was the default before, and a lot of code does
> not compile without PCI enabled.  On other architectures with limited
> PCI support that wasn't as complicated I've left the selection as-is.

Thanks for doing this.  It's a great cleanup.  I know you have a few
things you're cleaning up, but add my:

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

when you do that.
diff mbox series

Patch

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 5b4f88363453..ca40746ffa18 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -6,6 +6,8 @@  config ALPHA
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_NO_PREEMPT
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAS_PCI if !ALPHA_JENSEN
+	select PCI if !ALPHA_JENSEN
 	select HAVE_AOUT
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -15,6 +17,7 @@  config ALPHA
 	select NEED_SG_DMA_LENGTH
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
+	select GENERIC_PCI_IOMAP if PCI
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -319,17 +322,6 @@  config ISA_DMA_API
 	bool
 	default y
 
-config PCI
-	bool
-	depends on !ALPHA_JENSEN
-	select GENERIC_PCI_IOMAP
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 config PCI_DOMAINS
 	bool
 	default y
@@ -681,7 +673,6 @@  config HZ
 	default 1200 if HZ_1200
 	default 1024
 
-source "drivers/pci/Kconfig"
 source "drivers/eisa/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a045f3086047..55a6953e9239 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -53,9 +53,6 @@  config ARC
 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
-config MIGHT_HAVE_PCI
-	bool
-
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
@@ -555,24 +552,7 @@  config FORCE_MAX_ZONEORDER
 	default "12" if ARC_HUGEPAGE_16M
 	default "11"
 
-menu "Bus Support"
-
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  PCI is the name of a bus system, i.e., the way the CPU talks to
-	  the other stuff inside your box.  Find out if your board/platform
-	  has PCI.
-
-	  Note: PCIe support for Synopsys Device will be available only
-	  when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
-	  say Y, otherwise N.
-
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
-endmenu
-
 source "kernel/power/Kconfig"
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index 4e0df7b7a248..33e759233be8 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,7 +11,7 @@  menuconfig ARC_PLAT_AXS10X
 	select DW_APB_ICTL
 	select GPIO_DWAPB
 	select OF_GPIO
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	select AXS101 if ISA_ARCOMPACT
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 9356753c2ed8..c213ac5a45b5 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -11,4 +11,4 @@  menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select CLK_HSDK
 	select RESET_HSDK
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e8cd55a5b04c..a166ccdfdf86 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -149,9 +149,6 @@  config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config MIGHT_HAVE_PCI
-	bool
-
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -335,7 +332,7 @@  config ARCH_MULTIPLATFORM
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_MULTI_HANDLER
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
@@ -451,7 +448,7 @@  config ARCH_IXP4XX
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -464,7 +461,7 @@  config ARCH_DOVE
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
@@ -1231,14 +1228,6 @@  config ISA_DMA
 config ISA_DMA_API
 	bool
 
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 config PCI_DOMAINS
 	bool "Support for multiple PCI domains"
 	depends on PCI
@@ -1267,8 +1256,6 @@  config PCI_HOST_ITE8152
 	default y
 	select DMABOUNCE
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index a545976bdbd6..b14541bf31bd 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -4,7 +4,7 @@  menu "Kendin/Micrel KS8695 Implementations"
 
 config MACH_KS8695
 	bool "KS8695 development board"
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	help
 	  Say 'Y' here if you want your kernel to run on the original
 	  Kendin-Micrel KS8695 development board.
@@ -52,7 +52,7 @@  config MACH_CM4002
 
 config MACH_CM4008
 	bool "OpenGear CM4008"
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  CM4008 Console Server. See http://www.opengear.com for more
@@ -60,7 +60,7 @@  config MACH_CM4008
 
 config MACH_CM41xx
 	bool "OpenGear CM41xx"
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  CM4016 or CM4048 Console Servers. See http://www.opengear.com for
@@ -68,7 +68,7 @@  config MACH_CM41xx
 
 config MACH_IM4004
 	bool "OpenGear IM4004"
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  IM4004 Secure Access Server. See http://www.opengear.com for
@@ -76,7 +76,7 @@  config MACH_IM4004
 
 config MACH_IM42xx
 	bool "OpenGear IM42xx"
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  IM4216 or IM4248 Console Servers. See http://www.opengear.com for
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a68b34183107..f8d8716636ad 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -125,7 +125,7 @@  config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
 	select IWMMXT
-	select MIGHT_HAVE_PCI
+	select HAS_PCI
 	select NEED_MACH_IO_H if PCI
 	select PXA25x
 	select PXA27x
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b1a0e95c751..c6a3f705d47b 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -98,6 +98,7 @@  config ARM64
 	select GENERIC_TIME_VSYSCALL
 	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
+	select HAS_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_AUDITSYSCALL
@@ -284,13 +285,6 @@  source "arch/arm64/Kconfig.platforms"
 
 menu "Bus support"
 
-config PCI
-	bool "PCI support"
-	help
-	  This feature enables support for PCI bus system. If you say Y
-	  here, the kernel will include drivers and infrastructure code
-	  to support PCI bus devices.
-
 config PCI_DOMAINS
 	def_bool PCI
 
@@ -300,8 +294,6 @@  config PCI_DOMAINS_GENERIC
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
 endmenu
 
 menu "Kernel Features"
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 89a4b22f34d9..1bc856c61ed8 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -44,9 +44,6 @@  config FRAME_POINTER
 config LOCKDEP_SUPPORT
 	def_bool y
 
-config PCI
-	def_bool n
-
 config EARLY_PRINTK
 	def_bool y
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8b4a0c1748c0..272614773c97 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -50,6 +50,7 @@  config IA64
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAS_PCI if !IA64_HP_SIM
 	select HAVE_ARCH_AUDITSYSCALL
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
@@ -546,20 +547,12 @@  if !IA64_HP_SIM
 
 menu "Bus options (PCI, PCMCIA)"
 
-config PCI
-	bool "PCI support"
-	help
-	  Real IA-64 machines all have PCI/PCI-X/PCI Express busses.  Say Y
-	  here unless you are using a simulator without PCI support.
-
 config PCI_DOMAINS
 	def_bool PCI
 
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index aef698fa50e5..8cb0604b195b 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -63,17 +63,6 @@  source "drivers/zorro/Kconfig"
 
 endif
 
-config PCI
-	bool "PCI support"
-	depends on M54xx
-	help
-	  Enable the PCI bus. Support for the PCI bus hardware built into the
-	  ColdFire 547x and 548x processors.
-
-if PCI
-source "drivers/pci/Kconfig"
-endif
-
 if !MMU
 
 config ISA_DMA_API
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 21f00349af52..aea0bc963ab8 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -299,6 +299,7 @@  config M53xx
 	bool
 
 config M54xx
+	select HAS_PCI
 	bool
 
 endif # COLDFIRE
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index ace5c5bf1836..5ad416e17d9e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -29,6 +29,7 @@  config MICROBLAZE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select NO_BOOTMEM
+	select HAS_PCI
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
@@ -268,9 +269,6 @@  endmenu
 
 menu "Bus Options"
 
-config PCI
-	bool "PCI support"
-
 config PCI_DOMAINS
 	def_bool PCI
 
@@ -284,6 +282,4 @@  config PCI_XILINX
 	bool "Xilinx PCI host bridge support"
 	depends on PCI
 
-source "drivers/pci/Kconfig"
-
 endmenu
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 35511999156a..83361add48ca 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -74,6 +74,7 @@  config MIPS
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA if MODULES && 64BIT
 	select MODULES_USE_ELF_REL if MODULES
+	select PCI_DOMAINS if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB if !MACH_LOONGSON64
 	select SYSCTL_EXCEPTION_TRACE
@@ -96,7 +97,7 @@  config MIPS_GENERIC
 	select CPU_MIPSR2_IRQ_EI
 	select CSRC_R4K
 	select DMA_PERDEV_COHERENT
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select LIBFDT
 	select MIPS_AUTO_PFN_OFFSET
@@ -256,7 +257,7 @@  config BCM47XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select NO_EXCEPT_FILL
@@ -299,7 +300,7 @@  config MIPS_COBALT
 	select CSRC_R4K
 	select CEVT_GT641XX
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAS_PCI
 	select I8253
 	select I8259
 	select IRQ_MIPS_CPU
@@ -422,7 +423,7 @@  config LASAT
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
@@ -502,7 +503,7 @@  config MIPS_MALTA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_MIPS_CPU
 	select MIPS_GIC
-	select HW_HAS_PCI
+	select HAS_PCI
 	select I8253
 	select I8259
 	select MIPS_BONITO64
@@ -556,7 +557,7 @@  config MACH_PIC32
 config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
-	select HW_HAS_PCI
+	select HAS_PCI
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -673,7 +674,7 @@  config SGI_IP27
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
 	select SYS_HAS_EARLY_PRINTK
-	select HW_HAS_PCI
+	select HAS_PCI
 	select NR_CPUS_DEFAULT_64
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -733,7 +734,7 @@  config SGI_IP32
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
@@ -843,7 +844,7 @@  config SNI_RM
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select HW_HAS_EISA
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select I8253
 	select I8259
@@ -876,7 +877,7 @@  config MIKROTIK_RB532
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -903,7 +904,7 @@  config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HW_HAS_PCI
+	select HAS_PCI
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
 	select GPIOLIB
@@ -936,7 +937,7 @@  config NLM_XLR_BOARD
 	select NLM_COMMON
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
-	select HW_HAS_PCI
+	select HAS_PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -962,7 +963,7 @@  config NLM_XLP_BOARD
 	select NLM_COMMON
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
-	select HW_HAS_PCI
+	select HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -997,7 +998,7 @@  config MIPS_PARAVIRT
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS64_R2
 	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HW_HAS_PCI
+	select HAS_PCI
 	select SWAP_IO_SPACE
 	help
 	  This option supports guest running under ????
@@ -2992,18 +2993,6 @@  menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA
 	bool
-config HW_HAS_PCI
-	bool
-
-config PCI
-	bool "Support for PCI controller"
-	depends on HW_HAS_PCI
-	select PCI_DOMAINS
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
-	  say Y, otherwise N.
 
 config HT_PCI
 	bool "Support for HT-linked PCI"
@@ -3030,8 +3019,6 @@  config PCI_DRIVERS_LEGACY
 	def_bool !PCI_DRIVERS_GENERIC
 	select NO_GENERIC_PCI_IOPORT_MAP
 
-source "drivers/pci/Kconfig"
-
 #
 # ISA support is now enabled via select.  Too many systems still have the one
 # or other ISA chip on the board that users don't know about so don't expect
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 7d73f7f4202b..78e015a9b165 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -14,7 +14,7 @@  choice
 
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
-	select HW_HAS_PCI
+	select HAS_PCI
 	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -22,7 +22,7 @@  config MIPS_MTX1
 config MIPS_DB1XXX
 	bool "Alchemy DB1XXX / PB1XXX boards"
 	select GPIOLIB
-	select HW_HAS_PCI
+	select HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	help
@@ -40,7 +40,7 @@  config MIPS_XXS1500
 config MIPS_GPR
 	bool "Trapeze ITS GPR board"
 	select ALCHEMY_GPIOINT_AU1000
-	select HW_HAS_PCI
+	select HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
index 2c1dfd06c366..59b8fd9b6179 100644
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -13,6 +13,6 @@  config PCI_AR2315
 	bool "Atheros AR2315 PCI controller support"
 	depends on SOC_AR2315
 	select ARCH_HAS_PHYS_TO_DMA
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI
 	default y
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 9547cf1ea38d..7c4af384f191 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -75,11 +75,11 @@  config ATH79_MACH_UBNT_XM
 endmenu
 
 config SOC_AR71XX
-	select HW_HAS_PCI
+	select HAS_PCI
 	def_bool n
 
 config SOC_AR724X
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
@@ -90,12 +90,12 @@  config SOC_AR933X
 	def_bool n
 
 config SOC_AR934X
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
 config SOC_QCA955X
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 96ed735a4f4a..dc82ad30f4d2 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -5,17 +5,17 @@  menu "CPU support"
 config BCM63XX_CPU_3368
 	bool "support 3368 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config BCM63XX_CPU_6328
 	bool "support 6328 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config BCM63XX_CPU_6338
 	bool "support 6338 CPU"
 	select SYS_HAS_CPU_BMIPS32_3300
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config BCM63XX_CPU_6345
 	bool "support 6345 CPU"
@@ -24,22 +24,22 @@  config BCM63XX_CPU_6345
 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"
 	select SYS_HAS_CPU_BMIPS32_3300
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config BCM63XX_CPU_6358
 	bool "support 6358 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config BCM63XX_CPU_6362
 	bool "support 6362 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config BCM63XX_CPU_6368
 	bool "support 6368 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAS_PCI
 endmenu
 
 source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 8e3a1fc2bc39..3c6916c6e0a8 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -19,7 +19,7 @@  config SOC_AMAZON_SE
 config SOC_XWAY
 	bool "XWAY"
 	select SOC_TYPE_XWAY
-	select HW_HAS_PCI
+	select HAS_PCI
 	select MFD_SYSCON
 	select MFD_CORE
 
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index c865b4b9b775..816ef9d6101d 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -15,7 +15,7 @@  config LEMOTE_FULOONG2E
 	select DMA_NONCOHERENT
 	select BOOT_ELF32
 	select BOARD_SCACHE
-	select HW_HAS_PCI
+	select HAS_PCI
 	select I8259
 	select ISA
 	select IRQ_MIPS_CPU
@@ -46,7 +46,7 @@  config LEMOTE_MACH2F
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
-	select HW_HAS_PCI
+	select HAS_PCI
 	select I8259
 	select IRQ_MIPS_CPU
 	select ISA
@@ -74,7 +74,7 @@  config LOONGSON_MACH3X
 	select CSRC_R4K
 	select CEVT_R4K
 	select CPU_HAS_WB
-	select HW_HAS_PCI
+	select HAS_PCI
 	select ISA
 	select HT_PCI
 	select I8259
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index d319bc0c3df6..c00af0d5e795 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,25 +6,25 @@  choice
 config PMC_MSP4200_EVAL
 	bool "PMC-Sierra MSP4200 Eval Board"
 	select IRQ_MSP_SLP
-	select HW_HAS_PCI
+	select HAS_PCI
 	select MIPS_L1_CACHE_SHIFT_4
 
 config PMC_MSP4200_GW
 	bool "PMC-Sierra MSP4200 VoIP Gateway"
 	select IRQ_MSP_SLP
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config PMC_MSP7120_EVAL
 	bool "PMC-Sierra MSP7120 Eval Board"
 	select SYS_SUPPORTS_MULTITHREADING
 	select IRQ_MSP_CIC
-	select HW_HAS_PCI
+	select HAS_PCI
 
 config PMC_MSP7120_GW
 	bool "PMC-Sierra MSP7120 Residential Gateway"
 	select SYS_SUPPORTS_MULTITHREADING
 	select IRQ_MSP_CIC
-	select HW_HAS_PCI
+	select HAS_PCI
 	select MSP_HAS_USB
 	select MSP_ETH
 
@@ -32,7 +32,7 @@  config PMC_MSP7120_FPGA
 	bool "PMC-Sierra MSP7120 FPGA"
 	select SYS_SUPPORTS_MULTITHREADING
 	select IRQ_MSP_CIC
-	select HW_HAS_PCI
+	select HAS_PCI
 
 endchoice
 
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 1f9cb0e3c79a..8b7413fe04a8 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -27,18 +27,18 @@  choice
 	config SOC_RT288X
 		bool "RT288x"
 		select MIPS_L1_CACHE_SHIFT_4
-		select HW_HAS_PCI
+		select HAS_PCI
 
 	config SOC_RT305X
 		bool "RT305x"
 
 	config SOC_RT3883
 		bool "RT3883"
-		select HW_HAS_PCI
+		select HAS_PCI
 
 	config SOC_MT7620
 		bool "MT7620/8"
-		select HW_HAS_PCI
+		select HAS_PCI
 
 	config SOC_MT7621
 		bool "MT7621"
@@ -50,7 +50,7 @@  choice
 		select MIPS_GIC
 		select COMMON_CLK
 		select CLKSRC_MIPS_GIC
-		select HW_HAS_PCI
+		select HAS_PCI
 endchoice
 
 choice
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 7ec278d72096..0583331ba54e 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -3,7 +3,7 @@  config SIBYTE_SB1250
 	bool
 	select CEVT_SB1250
 	select CSRC_SB1250
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_ENABLE_LDT_IF_PCI
 	select SIBYTE_HAS_ZBUS_PROFILING
@@ -23,7 +23,7 @@  config SIBYTE_BCM1125
 	bool
 	select CEVT_SB1250
 	select CSRC_SB1250
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_BCM112X
 	select SIBYTE_HAS_ZBUS_PROFILING
@@ -33,7 +33,7 @@  config SIBYTE_BCM1125H
 	bool
 	select CEVT_SB1250
 	select CSRC_SB1250
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_BCM112X
 	select SIBYTE_ENABLE_LDT_IF_PCI
@@ -52,7 +52,7 @@  config SIBYTE_BCM1x80
 	bool
 	select CEVT_BCM1480
 	select CSRC_BCM1480
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
@@ -62,7 +62,7 @@  config SIBYTE_BCM1x55
 	bool
 	select CEVT_BCM1480
 	select CSRC_BCM1480
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_SB1xxx_SOC
 	select SIBYTE_HAS_ZBUS_PROFILING
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index d2509c93f0ee..cf5a49c513d4 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -59,7 +59,7 @@  config SOC_TX3927
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_TXX9
 	select GPIO_TXX9
 
@@ -67,7 +67,7 @@  config SOC_TX4927
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
@@ -77,7 +77,7 @@  config SOC_TX4938
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAS_PCI
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
@@ -87,7 +87,7 @@  config SOC_TX4939
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI_TX4927
 	select HAS_TXX9_ACLC
 
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 992c988b83b0..01f37c35fa19 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -30,7 +30,7 @@  config TANBAC_TB022X
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select HW_HAS_PCI
+	select HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -46,7 +46,7 @@  config VICTOR_MPC30X
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -57,7 +57,7 @@  config ZAO_CAPCELLA
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select HW_HAS_PCI
+	select HAS_PCI
 	select PCI_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -99,6 +99,6 @@  endchoice
 
 config PCI_VR41XX
 	bool "Add PCI control unit support of NEC VR4100 series"
-	depends on MACH_VR41XX && HW_HAS_PCI
+	depends on MACH_VR41XX && HAS_PCI
 	default y
 	select PCI
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 8e6d83f79e72..6b946eea90ee 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -19,6 +19,7 @@  config PARISC
 	select NO_BOOTMEM
 	select BUG
 	select BUILDTIME_EXTABLE_SORT
+	select HAS_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6fa6f92edb7f..0713375e1127 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -168,10 +168,16 @@  config PPC
 	select GENERIC_CPU_VULNERABILITIES	if PPC_BARRIER_NOSPEC
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_PCI_IOMAP		if PCI
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
+	# Platforms that what PCI turned unconditionally just do select PCI
+	# in their config node, otherwise allow the user to enable it.
+	# This means we can enable PCI even on platforms that don't support
+	# it, which is harmless except for wasted memory.
+	select HAS_PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KGDB
@@ -945,23 +951,6 @@  config FSL_GTM
 config MCA
 	bool
 
-# Platforms that what PCI turned unconditionally just do select PCI
-# in their config node.  Platforms that want to choose at config
-# time should select PPC_PCI_CHOICE
-config PPC_PCI_CHOICE
-	bool
-
-config PCI
-	bool "PCI support" if PPC_PCI_CHOICE
-	default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
-		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
-	select GENERIC_PCI_IOMAP
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
 config PCI_DOMAINS
 	def_bool PCI
 
@@ -982,8 +971,6 @@  config PCI_8260
 	select PPC_INDIRECT_PCI
 	default y
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 config HAS_RAPIDIO
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 70856a213663..000efce8191b 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -272,7 +272,7 @@  config XILINX_VIRTEX440_GENERIC_BOARD
 config XILINX_ML510
 	bool "Xilinx ML510 extra support"
 	depends on XILINX_VIRTEX440_GENERIC_BOARD
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select XILINX_PCI if PCI
 	select PPC_INDIRECT_PCI if PCI
 	select PPC_I8259 if PCI
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b59eab6cbb1b..afc0a7f62cd9 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -5,7 +5,7 @@  config PPC_MPC512x
 	select COMMON_CLK
 	select FSL_SOC
 	select IPIC
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select FSL_PCI if PCI
 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 55a587070342..557379857de5 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -3,7 +3,7 @@  config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on 6xx
 	select COMMON_CLK
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 
 config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 071f53b0c0a0..32c70d6dee1e 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -3,7 +3,7 @@  menuconfig PPC_83xx
 	bool "83xx-based boards"
 	depends on 6xx
 	select PPC_UDBG_16550
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select FSL_PCI if PCI
 	select FSL_SOC
 	select IPIC
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 68920d42b4bc..8438ac3f5c70 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -5,7 +5,7 @@  menuconfig FSL_SOC_BOOKE
 	select FSL_SOC
 	select PPC_UDBG_16550
 	select MPIC
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select FSL_PCI if PCI
 	select SERIAL_8250_EXTENDED if SERIAL_8250
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index bcd179d3ed92..bbdf5b8d871a 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -70,7 +70,7 @@  endif
 
 config MPC8641
 	bool
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
@@ -79,7 +79,7 @@  config MPC8641
 
 config MPC8610
 	bool
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 14ef17e10ec9..6887739b6568 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -285,7 +285,7 @@  config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
 	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select GPIOLIB
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 6c6a7c72cae4..0b0a2cceea64 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -40,14 +40,14 @@  config 40x
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 
 config 44x
 	bool "AMCC 44x, 46x or 47x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	select PHYS_64BIT
 
 config E200
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 6f7525555b19..804a8924d421 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -6,7 +6,7 @@  config PPC_PS3
 	select USB_OHCI_LITTLE_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	select PPC_PCI_CHOICE
+	select HAS_PCI
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a344980287a5..6eb31a0698ac 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -38,6 +38,7 @@  config RISCV
 	select RISCV_ISA_A if SMP
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
+	select HAS_PCI
 	select HAVE_ARCH_TRACEHOOK
 	select MODULES_USE_ELF_RELA if MODULES
 	select THREAD_INFO_IN_TASK
@@ -216,28 +217,12 @@  source "kernel/Kconfig.hz"
 
 endmenu
 
-menu "Bus support"
-
-config PCI
-	bool "PCI support"
-	select PCI_MSI
-	help
-	  This feature enables support for PCI bus system. If you say Y
-	  here, the kernel will include drivers and infrastructure code
-	  to support PCI bus devices.
-
-	  If you don't know what to do here, say Y.
-
 config PCI_DOMAINS
 	def_bool PCI
 
 config PCI_DOMAINS_GENERIC
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
-endmenu
-
 menu "Power management options"
 
 source kernel/power/Kconfig
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9a9c7a6fe925..3491a084cf55 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -121,6 +121,7 @@  config S390
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select CPU_NO_EFFICIENT_FFS if !HAVE_MARCH_Z9_109_FEATURES
+	select HAS_PCI
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_SOFT_DIRTY
 	select HAVE_ARCH_TRACEHOOK
@@ -165,10 +166,15 @@  config S390
 	select HAVE_RSEQ
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
+	select IOMMU_HELPER		if PCI
+	select IOMMU_SUPPORT		if PCI
 	select MODULES_USE_ELF_RELA
+	select NEED_DMA_MAP_STATE	if PCI
+	select NEED_SG_DMA_LENGTH	if PCI
 	select NO_BOOTMEM
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_MSI			if PCI
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
@@ -698,17 +704,6 @@  config QDIO
 
 	  If unsure, say Y.
 
-menuconfig PCI
-	bool "PCI support"
-	select PCI_MSI
-	select IOMMU_HELPER
-	select IOMMU_SUPPORT
-	select NEED_DMA_MAP_STATE
-	select NEED_SG_DMA_LENGTH
-
-	help
-	  Enable PCI support.
-
 if PCI
 
 config PCI_NR_FUNCTIONS
@@ -719,13 +714,11 @@  config PCI_NR_FUNCTIONS
 	  This allows you to specify the maximum number of PCI functions which
 	  this kernel will support.
 
-source "drivers/pci/Kconfig"
-
-endif	# PCI
-
 config PCI_DOMAINS
 	def_bool PCI
 
+endif	# PCI
+
 config HAS_IOMEM
 	def_bool PCI
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1fb7b6d72baf..2ff6855811a5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -41,13 +41,16 @@  config SUPERH
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_PCI_IOMAP if PCI
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
 	select MODULES_USE_ELF_RELA
+	select NO_GENERIC_PCI_IOPORT_MAP if PCI
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION
+	select PCI_DOMAINS if PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_NMI
@@ -131,9 +134,6 @@  config SYS_SUPPORTS_SMP
 config SYS_SUPPORTS_NUMA
 	bool
 
-config SYS_SUPPORTS_PCI
-	bool
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -858,22 +858,9 @@  config MAPLE
 	 Dreamcast with a serial line terminal or a remote network
 	 connection.
 
-config PCI
-	bool "PCI support"
-	depends on SYS_SUPPORTS_PCI
-	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
-	select NO_GENERIC_PCI_IOPORT_MAP
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. If you have PCI, say Y, otherwise N.
-
 config PCI_DOMAINS
 	bool
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 6394b4f0a69b..7d74abbbf7f4 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -101,7 +101,7 @@  config SH_7751_SOLUTION_ENGINE
 config SH_7780_SOLUTION_ENGINE
 	bool "SolutionEngine7780"
 	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	depends on CPU_SUBTYPE_SH7780
 	help
 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -129,7 +129,7 @@  config SH_HP6XX
 
 config SH_DREAMCAST
 	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	depends on CPU_SUBTYPE_SH7091
 	help
 	  Select Dreamcast if configuring for a SEGA Dreamcast.
@@ -139,7 +139,7 @@  config SH_SH03
 	bool "Interface CTP/PCI-SH03"
 	depends on CPU_SUBTYPE_SH7751
 	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	help
 	  CTP/PCI-SH03 is a CPU module computer that is produced
 	  by Interface Corporation.
@@ -149,7 +149,7 @@  config SH_SECUREEDGE5410
 	bool "SecureEdge5410"
 	depends on CPU_SUBTYPE_SH7751R
 	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	help
 	  Select SecureEdge5410 if configuring for a SnapGear SH board.
 	  This includes both the OEM SecureEdge products as well as the
@@ -158,7 +158,7 @@  config SH_SECUREEDGE5410
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	select IO_TRAPPED if MMU
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
@@ -176,7 +176,7 @@  config SH_RSK
 config SH_SDK7780
 	bool "SDK7780R3"
 	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	help
 	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
 	  evaluation board.
@@ -184,7 +184,7 @@  config SH_SDK7780
 config SH_SDK7786
 	bool "SDK7786"
 	depends on CPU_SUBTYPE_SH7786
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	select NO_IOPORT_MAP if !PCI
 	select HAVE_SRAM_POOL
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
@@ -195,7 +195,7 @@  config SH_SDK7786
 config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	select IO_TRAPPED if MMU
 
 config SH_SH7757LCR
@@ -207,7 +207,7 @@  config SH_SH7757LCR
 config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
@@ -229,7 +229,7 @@  config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
 	select GPIOLIB
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	select NO_IOPORT_MAP if !PCI
 
 config SH_MIGOR
@@ -302,7 +302,7 @@  config SH_SH4202_MICRODEV
 config SH_LANDISK
 	bool "LANDISK"
 	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	help
 	  I-O DATA DEVICE, INC. "LANDISK Series" support.
 
@@ -310,7 +310,7 @@  config SH_TITAN
 	bool "TITAN"
 	depends on CPU_SUBTYPE_SH7751R
 	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	help
 	  Select Titan if you are configuring for a Nimble Microsystems
 	  NetEngine NP51R.
@@ -325,7 +325,7 @@  config SH_SHMIN
 config SH_LBOX_RE2
 	bool "L-BOX RE2"
 	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	help
 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
@@ -346,7 +346,7 @@  config SH_MAGIC_PANEL_R2
 config SH_CAYMAN
 	bool "Hitachi Cayman"
 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	select ARCH_MIGHT_HAVE_PC_SERIO
 
 config SH_POLARIS
@@ -380,7 +380,7 @@  config SH_APSH4A3A
 config SH_APSH4AD0A
 	bool "AP-SH4AD-0A"
 	select SH_ALPHA_BOARD
-	select SYS_SUPPORTS_PCI
+	select HAS_PCI
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on CPU_SUBTYPE_SH7786
 	help
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e6f2a38d2e61..2a4943f9765e 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -16,6 +16,7 @@  config SPARC
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select OF
 	select OF_PROMTREE
+	select HAS_PCI
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP || SPARC64
@@ -474,18 +475,6 @@  config SUN_LDOMS
 	  Say Y here is you want to support virtual devices via
 	  Logical Domains.
 
-config PCI
-	bool "Support for PCI and PS/2 keyboard/mouse"
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-	  CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
-	  CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
-	  All of these platforms are extremely obscure, so say N if unsure.
-
 config PCI_DOMAINS
 	def_bool PCI if SPARC64
 
@@ -520,8 +509,6 @@  config SPARC_GRPCI2
 	help
 	  Say Y here to include the GRPCI2 Host Bridge Driver.
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 config SUN_OPENPROMFS
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 6b9938919f0b..de982541a059 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -31,9 +31,6 @@  config ISA
 config SBUS
 	bool
 
-config PCI
-	bool
-
 config PCMCIA
 	bool
 
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 60eae744d8fd..d90a78f1143a 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -4,6 +4,7 @@  config UNICORE32
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select HAS_PCI
 	select HAVE_MEMBLOCK
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
@@ -119,16 +120,6 @@  endmenu
 
 menu "Bus support"
 
-config PCI
-	bool "PCI Support"
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1a0be022f91d..7cbc656f47e7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -113,6 +113,7 @@  config X86
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDLOCKUP_CHECK_TIMESTAMP	if X86_64
+	select HAS_PCI
 	select HAVE_ACPI_APEI			if ACPI
 	select HAVE_ACPI_APEI_NMI		if ACPI
 	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
@@ -2567,15 +2568,6 @@  endmenu
 
 menu "Bus options (PCI etc.)"
 
-config PCI
-	bool "PCI support"
-	default y
-	---help---
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 choice
 	prompt "PCI access mode"
 	depends on X86_32 && PCI
@@ -2658,8 +2650,6 @@  config PCI_CNB20LE_QUIRK
 
 	  You should say N unless you know you need this.
 
-source "drivers/pci/Kconfig"
-
 config ISA_BUS
 	bool "ISA bus support on modern systems" if EXPERT
 	help
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index b9ad83a0ee5d..22abeb236863 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -20,6 +20,7 @@  config XTENSA
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_STRNCPY_FROM_USER if KASAN
+	select HAS_PCI
 	select HAVE_ARCH_KASAN if MMU
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
@@ -384,21 +385,6 @@  config XTENSA_CALIBRATE_CCOUNT
 config SERIAL_CONSOLE
 	def_bool n
 
-menu "Bus options"
-
-config PCI
-	bool "PCI support"
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
-endmenu
-
 menu "Platform options"
 
 choice
diff --git a/drivers/Kconfig b/drivers/Kconfig
index ab4d43923c4d..059573823387 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,7 +1,11 @@ 
 # SPDX-License-Identifier: GPL-2.0
 menu "Device Drivers"
 
+# Keep I/O buses first
+
 source "drivers/amba/Kconfig"
+source "drivers/pci/Kconfig"
+
 
 source "drivers/base/Kconfig"
 
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 5a48b5606110..5bbfea1a019c 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -63,17 +63,6 @@  config ISA
 	  If you want to plug an ISA card into your EISA bus, say Y here.
 	  Most people should say N.
 
-config PCI
-	bool "PCI support"
-	help
-	  All recent HP machines have PCI slots, and you should say Y here
-	  if you have a recent machine.  If you are convinced you do not have
-	  PCI slots in your machine (eg a 712), then you may say "N" here.
-	  Beware that some GSC cards have a Dino onboard and PCI inside them,
-	  so it may be safest to say "Y" anyway.
-
-source "drivers/pci/Kconfig"
-
 config GSC_DINO
 	bool "GSCtoPCI/Dino PCI support"
 	depends on PCI && GSC
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56ff8f6d31fc..229a518b68cd 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -3,6 +3,18 @@ 
 # PCI configuration
 #
 
+config HAS_PCI
+	bool
+
+menuconfig PCI
+	bool "PCI support"
+	depends on HAS_PCI
+
+	help
+	  This option enables support for the PCI local bus, including
+	  support for PCI-X and the fundations for PCI Express support.
+	  Say 'Y' here unless you know what you are doing.
+
 source "drivers/pci/pcie/Kconfig"
 
 config PCI_MSI