new file mode 100644
@@ -0,0 +1,2907 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Intel Corporation
+
+#include <linux/device.h>
+
+#include "ipu3-css.h"
+#include "ipu3-css-fw.h"
+#include "ipu3-tables.h"
+
+#define DIV_ROUND_CLOSEST_DOWN(a, b) (((a) + ((b) / 2) - 1) / (b))
+#define roundclosest_down(a, b) (DIV_ROUND_CLOSEST_DOWN(a, b) * (b))
+
+#define IPU3_UAPI_ANR_MAX_RESET ((1 << 12) - 1)
+#define IPU3_UAPI_ANR_MIN_RESET (((-1) << 12) + 1)
+
+struct ipu3_css_scaler_info {
+ unsigned int phase_step; /* Same for luma/chroma */
+ int exp_shift;
+
+ unsigned int phase_init; /* luma/chroma dependent */
+ int pad_left;
+ int pad_right;
+ int crop_left;
+ int crop_top;
+};
+
+static unsigned int ipu3_css_scaler_get_exp(unsigned int counter,
+ unsigned int divider)
+{
+ int i = fls(divider) - fls(counter);
+
+ if (i <= 0)
+ return 0;
+
+ if (divider >> i < counter)
+ i = i - 1;
+
+ return i;
+}
+
+/* Set up the CSS scaler look up table */
+static void
+ipu3_css_scaler_setup_lut(unsigned int taps, unsigned int input_width,
+ unsigned int output_width, int phase_step_correction,
+ const int *coeffs, unsigned int coeffs_size,
+ s8 coeff_lut[], struct ipu3_css_scaler_info *info)
+{
+ int tap, phase, phase_sum_left, phase_sum_right;
+ int exponent = ipu3_css_scaler_get_exp(output_width, input_width);
+ int mantissa = (1 << exponent) * output_width;
+ unsigned int phase_step;
+
+ if (input_width == output_width) {
+ for (phase = 0; phase < IMGU_SCALER_PHASES; phase++) {
+ for (tap = 0; tap < taps; tap++) {
+ coeff_lut[phase * IMGU_SCALER_FILTER_TAPS + tap]
+ = 0;
+ }
+ }
+
+ info->phase_step = IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF);
+ info->exp_shift = 0;
+ info->pad_left = 0;
+ info->pad_right = 0;
+ info->phase_init = 0;
+ info->crop_left = 0;
+ info->crop_top = 0;
+ return;
+ }
+
+ for (phase = 0; phase < IMGU_SCALER_PHASES; phase++) {
+ for (tap = 0; tap < taps; tap++) {
+ /* flip table to for convolution reverse indexing */
+ s64 coeff = coeffs[coeffs_size -
+ ((tap * (coeffs_size / taps)) + phase) - 1];
+ coeff *= mantissa;
+ coeff = div64_long(coeff, input_width);
+
+ /* Add +"0.5" */
+ coeff += 1 << (IMGU_SCALER_COEFF_BITS - 1);
+ coeff >>= IMGU_SCALER_COEFF_BITS;
+
+ coeff_lut[phase * IMGU_SCALER_FILTER_TAPS + tap] =
+ coeff;
+ }
+ }
+
+ phase_step = IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF) *
+ output_width / input_width;
+ phase_step += phase_step_correction;
+ phase_sum_left = (taps / 2 * IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF)) -
+ (1 << (IMGU_SCALER_PHASE_COUNTER_PREC_REF - 1));
+ phase_sum_right = (taps / 2 * IMGU_SCALER_PHASES *
+ (1 << IMGU_SCALER_PHASE_COUNTER_PREC_REF)) +
+ (1 << (IMGU_SCALER_PHASE_COUNTER_PREC_REF - 1));
+
+ info->exp_shift = IMGU_SCALER_MAX_EXPONENT_SHIFT - exponent;
+ info->pad_left = (phase_sum_left % phase_step == 0) ?
+ phase_sum_left / phase_step - 1 : phase_sum_left / phase_step;
+ info->pad_right = (phase_sum_right % phase_step == 0) ?
+ phase_sum_right / phase_step - 1 : phase_sum_right / phase_step;
+ info->phase_init = phase_sum_left - phase_step * info->pad_left;
+ info->phase_step = phase_step;
+ info->crop_left = taps - 1;
+ info->crop_top = taps - 1;
+}
+
+/*
+ * Calculates the exact output image width/height, based on phase_step setting
+ * (must be perfectly aligned with hardware).
+ */
+static unsigned int
+ipu3_css_scaler_calc_scaled_output(unsigned int input,
+ struct ipu3_css_scaler_info *info)
+{
+ unsigned int arg1 = input * info->phase_step +
+ (1 - IMGU_SCALER_TAPS_Y / 2) * IMGU_SCALER_FIR_PHASES -
+ IMGU_SCALER_FIR_PHASES / (2 * IMGU_SCALER_PHASES);
+ unsigned int arg2 = ((IMGU_SCALER_TAPS_Y / 2) * IMGU_SCALER_FIR_PHASES +
+ IMGU_SCALER_FIR_PHASES / (2 * IMGU_SCALER_PHASES)) *
+ IMGU_SCALER_FIR_PHASES + info->phase_step / 2;
+
+ return ((arg1 + (arg2 - IMGU_SCALER_FIR_PHASES * info->phase_step) /
+ IMGU_SCALER_FIR_PHASES) / (2 * IMGU_SCALER_FIR_PHASES)) * 2;
+}
+
+/*
+ * Calculate the output width and height, given the luma
+ * and chroma details of a scaler
+ */
+static void
+ipu3_css_scaler_calc(u32 input_width, u32 input_height, u32 target_width,
+ u32 target_height, struct imgu_abi_osys_config *cfg,
+ struct ipu3_css_scaler_info *info_luma,
+ struct ipu3_css_scaler_info *info_chroma,
+ unsigned int *output_width, unsigned int *output_height,
+ unsigned int *procmode)
+{
+ u32 out_width = target_width;
+ u32 out_height = target_height;
+ const unsigned int height_alignment = 2;
+ int phase_step_correction = -1;
+
+ /*
+ * Calculate scaled output width. If the horizontal and vertical scaling
+ * factor is different, then choose the biggest and crop off excess
+ * lines or columns after formatting.
+ */
+ if (target_height * input_width > target_width * input_height)
+ target_width = DIV_ROUND_UP(target_height * input_width,
+ input_height);
+
+ if (input_width == target_width)
+ *procmode = IMGU_ABI_OSYS_PROCMODE_BYPASS;
+ else
+ *procmode = IMGU_ABI_OSYS_PROCMODE_DOWNSCALE;
+
+ memset(&cfg->scaler_coeffs_chroma, 0,
+ sizeof(cfg->scaler_coeffs_chroma));
+ memset(&cfg->scaler_coeffs_luma, 0, sizeof(*cfg->scaler_coeffs_luma));
+ do {
+ phase_step_correction++;
+
+ ipu3_css_scaler_setup_lut(IMGU_SCALER_TAPS_Y,
+ input_width, target_width,
+ phase_step_correction,
+ ipu3_css_downscale_4taps,
+ IMGU_SCALER_DOWNSCALE_4TAPS_LEN,
+ cfg->scaler_coeffs_luma, info_luma);
+
+ ipu3_css_scaler_setup_lut(IMGU_SCALER_TAPS_UV,
+ input_width, target_width,
+ phase_step_correction,
+ ipu3_css_downscale_2taps,
+ IMGU_SCALER_DOWNSCALE_2TAPS_LEN,
+ cfg->scaler_coeffs_chroma,
+ info_chroma);
+
+ out_width = ipu3_css_scaler_calc_scaled_output(input_width,
+ info_luma);
+ out_height = ipu3_css_scaler_calc_scaled_output(input_height,
+ info_luma);
+ } while ((out_width < target_width || out_height < target_height ||
+ !IS_ALIGNED(out_height, height_alignment)) &&
+ phase_step_correction <= 5);
+
+ *output_width = out_width;
+ *output_height = out_height;
+}
+
+/********************** Osys routines for scaler****************************/
+
+static void ipu3_css_osys_set_format(enum imgu_abi_frame_format host_format,
+ unsigned int *osys_format,
+ unsigned int *osys_tiling)
+{
+ *osys_format = IMGU_ABI_OSYS_FORMAT_YUV420;
+ *osys_tiling = IMGU_ABI_OSYS_TILING_NONE;
+
+ switch (host_format) {
+ case IMGU_ABI_FRAME_FORMAT_YUV420:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_YUV420;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_YV12:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_YV12;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV12:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV12;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV16:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV16;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV21:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV21;
+ break;
+ case IMGU_ABI_FRAME_FORMAT_NV12_TILEY:
+ *osys_format = IMGU_ABI_OSYS_FORMAT_NV12;
+ *osys_tiling = IMGU_ABI_OSYS_TILING_Y;
+ break;
+ default:
+ /* For now, assume use default values */
+ break;
+ }
+}
+
+/*
+ * Function calculates input frame stripe offset, based
+ * on output frame stripe offset and filter parameters.
+ */
+static int ipu3_css_osys_calc_stripe_offset(int stripe_offset_out,
+ int fir_phases, int phase_init,
+ int phase_step, int pad_left)
+{
+ int stripe_offset_inp = stripe_offset_out * fir_phases -
+ pad_left * phase_step;
+
+ return DIV_ROUND_UP(stripe_offset_inp - phase_init, phase_step);
+}
+
+/*
+ * Calculate input frame phase, given the output frame
+ * stripe offset and filter parameters
+ */
+static int ipu3_css_osys_calc_stripe_phase_init(int stripe_offset_out,
+ int fir_phases, int phase_init,
+ int phase_step, int pad_left)
+{
+ int stripe_offset_inp =
+ ipu3_css_osys_calc_stripe_offset(stripe_offset_out,
+ fir_phases, phase_init,
+ phase_step, pad_left);
+
+ return phase_init + ((pad_left + stripe_offset_inp) * phase_step) -
+ stripe_offset_out * fir_phases;
+}
+
+/*
+ * This function calculates input frame stripe width,
+ * based on output frame stripe offset and filter parameters
+ */
+static int ipu3_css_osys_calc_inp_stripe_width(int stripe_width_out,
+ int fir_phases, int phase_init,
+ int phase_step, int fir_taps,
+ int pad_left, int pad_right)
+{
+ int stripe_width_inp = (stripe_width_out + fir_taps - 1) * fir_phases;
+
+ stripe_width_inp = DIV_ROUND_UP(stripe_width_inp - phase_init,
+ phase_step);
+
+ return stripe_width_inp - pad_left - pad_right;
+}
+
+/*
+ * This function calculates output frame stripe width, basedi
+ * on output frame stripe offset and filter parameters
+ */
+static int ipu3_css_osys_out_stripe_width(int stripe_width_inp, int fir_phases,
+ int phase_init, int phase_step,
+ int fir_taps, int pad_left,
+ int pad_right, int column_offset)
+{
+ int stripe_width_out = (pad_left + stripe_width_inp +
+ pad_right - column_offset) * phase_step;
+
+ stripe_width_out = (stripe_width_out + phase_init) / fir_phases;
+
+ return stripe_width_out - (fir_taps - 1);
+}
+
+struct ipu3_css_reso {
+ unsigned int input_width;
+ unsigned int input_height;
+ enum imgu_abi_frame_format input_format;
+ unsigned int pin_width[IMGU_ABI_OSYS_PINS];
+ unsigned int pin_height[IMGU_ABI_OSYS_PINS];
+ unsigned int pin_stride[IMGU_ABI_OSYS_PINS];
+ enum imgu_abi_frame_format pin_format[IMGU_ABI_OSYS_PINS];
+ int chunk_width;
+ int chunk_height;
+ int block_height;
+ int block_width;
+};
+
+struct ipu3_css_frame_params {
+ /* Output pins */
+ unsigned int enable;
+ unsigned int format;
+ unsigned int flip;
+ unsigned int mirror;
+ unsigned int tiling;
+ unsigned int reduce_range;
+ unsigned int width;
+ unsigned int height;
+ unsigned int stride;
+ unsigned int scaled;
+ unsigned int crop_left;
+ unsigned int crop_top;
+};
+
+struct ipu3_css_stripe_params {
+ unsigned int processing_mode;
+ unsigned int phase_step;
+ unsigned int exp_shift;
+ unsigned int phase_init_left_y;
+ unsigned int phase_init_left_uv;
+ unsigned int phase_init_top_y;
+ unsigned int phase_init_top_uv;
+ unsigned int pad_left_y;
+ unsigned int pad_left_uv;
+ unsigned int pad_right_y;
+ unsigned int pad_right_uv;
+ unsigned int pad_top_y;
+ unsigned int pad_top_uv;
+ unsigned int pad_bottom_y;
+ unsigned int pad_bottom_uv;
+ unsigned int crop_left_y;
+ unsigned int crop_top_y;
+ unsigned int crop_left_uv;
+ unsigned int crop_top_uv;
+ unsigned int start_column_y;
+ unsigned int start_column_uv;
+ unsigned int chunk_width;
+ unsigned int chunk_height;
+ unsigned int block_width;
+ unsigned int block_height;
+ unsigned int input_width;
+ unsigned int input_height;
+ int output_width[IMGU_ABI_OSYS_PINS];
+ int output_height[IMGU_ABI_OSYS_PINS];
+ int output_offset[IMGU_ABI_OSYS_PINS];
+};
+
+/*
+ * frame_params - size IMGU_ABI_OSYS_PINS
+ * stripe_params - size IPU3_UAPI_MAX_STRIPES
+ */
+static int ipu3_css_osys_calc_frame_and_stripe_params(
+ struct ipu3_css *css, unsigned int stripes,
+ struct imgu_abi_osys_config *osys,
+ struct ipu3_css_scaler_info *scaler_luma,
+ struct ipu3_css_scaler_info *scaler_chroma,
+ struct ipu3_css_frame_params frame_params[],
+ struct ipu3_css_stripe_params stripe_params[])
+{
+ u32 input_width = css->rect[IPU3_CSS_RECT_GDC].width;
+ u32 input_height = css->rect[IPU3_CSS_RECT_GDC].height;
+ u32 target_width = css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ u32 target_height = css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ unsigned int procmode = 0;
+ struct ipu3_css_reso reso;
+ unsigned int output_width, pin, s;
+
+ /* Frame parameters */
+
+ /* Input width for Output System is output width of DVS (with GDC) */
+ reso.input_width = css->rect[IPU3_CSS_RECT_GDC].width;
+
+ /* Input height for Output System is output height of DVS (with GDC) */
+ reso.input_height = css->rect[IPU3_CSS_RECT_GDC].height;
+
+ reso.input_format =
+ css->queue[IPU3_CSS_QUEUE_OUT].css_fmt->frame_format;
+
+ reso.pin_width[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ reso.pin_height[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ reso.pin_stride[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].width_pad;
+ reso.pin_format[IMGU_ABI_OSYS_PIN_OUT] =
+ css->queue[IPU3_CSS_QUEUE_OUT].css_fmt->frame_format;
+
+ reso.pin_width[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ reso.pin_height[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ reso.pin_stride[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].width_pad;
+ reso.pin_format[IMGU_ABI_OSYS_PIN_VF] =
+ css->queue[IPU3_CSS_QUEUE_VF].css_fmt->frame_format;
+
+ /* Configure the frame parameters for all output pins */
+
+ frame_params[IMGU_ABI_OSYS_PIN_OUT].width =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ frame_params[IMGU_ABI_OSYS_PIN_OUT].height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].width =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].height =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_top = 0;
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_left = 0;
+
+ for (pin = 0; pin < IMGU_ABI_OSYS_PINS; pin++) {
+ int enable = 0;
+ int scaled = 0;
+ unsigned int format = 0;
+ unsigned int tiling = 0;
+
+ frame_params[pin].flip = 0;
+ frame_params[pin].mirror = 0;
+ frame_params[pin].reduce_range = 0;
+ if (reso.pin_width[pin] != 0 && reso.pin_height[pin] != 0) {
+ enable = 1;
+ if (pin == IMGU_ABI_OSYS_PIN_OUT) {
+ if (reso.input_width < reso.pin_width[pin] ||
+ reso.input_height < reso.pin_height[pin])
+ return -EINVAL;
+ /*
+ * When input and output resolution is
+ * different instead of scaling, cropping
+ * should happen. Determine the crop factor
+ * to do the symmetric cropping
+ */
+ frame_params[pin].crop_left = roundclosest_down(
+ (reso.input_width -
+ reso.pin_width[pin]) / 2,
+ IMGU_OSYS_DMA_CROP_W_LIMIT);
+ frame_params[pin].crop_top = roundclosest_down(
+ (reso.input_height -
+ reso.pin_height[pin]) / 2,
+ IMGU_OSYS_DMA_CROP_H_LIMIT);
+ } else {
+ if (reso.pin_width[pin] != reso.input_width ||
+ reso.pin_height[pin] != reso.input_height) {
+ /*
+ * If resolution is different at input
+ * and output of OSYS, scaling is
+ * considered except when pin is MAIN.
+ * Later it will be decide whether
+ * scaler factor is 1 or other
+ * and cropping has to be done or not.
+ */
+ scaled = 1;
+ }
+ }
+ ipu3_css_osys_set_format(reso.pin_format[pin], &format,
+ &tiling);
+ } else {
+ enable = 0;
+ }
+ frame_params[pin].enable = enable;
+ frame_params[pin].format = format;
+ frame_params[pin].tiling = tiling;
+ frame_params[pin].stride = reso.pin_stride[pin];
+ frame_params[pin].scaled = scaled;
+ }
+
+ ipu3_css_scaler_calc(input_width, input_height, target_width,
+ target_height, osys, scaler_luma, scaler_chroma,
+ &reso.pin_width[IMGU_ABI_OSYS_PIN_VF],
+ &reso.pin_height[IMGU_ABI_OSYS_PIN_VF], &procmode);
+ dev_dbg(css->dev, "osys scaler procmode is %u", procmode);
+ output_width = reso.pin_width[IMGU_ABI_OSYS_PIN_VF];
+
+ if (output_width < reso.input_width / 2) {
+ /* Scaling factor <= 0.5 */
+ reso.chunk_width = IMGU_OSYS_BLOCK_WIDTH;
+ reso.block_width = IMGU_OSYS_BLOCK_WIDTH;
+ } else { /* 0.5 <= Scaling factor <= 1.0 */
+ reso.chunk_width = IMGU_OSYS_BLOCK_WIDTH / 2;
+ reso.block_width = IMGU_OSYS_BLOCK_WIDTH;
+ }
+
+ if (output_width <= reso.input_width * 7 / 8) {
+ /* Scaling factor <= 0.875 */
+ reso.chunk_height = IMGU_OSYS_BLOCK_HEIGHT;
+ reso.block_height = IMGU_OSYS_BLOCK_HEIGHT;
+ } else { /* 1.0 <= Scaling factor <= 1.75 */
+ reso.chunk_height = IMGU_OSYS_BLOCK_HEIGHT / 2;
+ reso.block_height = IMGU_OSYS_BLOCK_HEIGHT;
+ }
+
+ /*
+ * Calculate scaler configuration parameters based on input and output
+ * resolution.
+ */
+
+ if (frame_params[IMGU_ABI_OSYS_PIN_VF].enable) {
+ /*
+ * When aspect ratio is different between target resolution and
+ * required resolution, determine the crop factor to do
+ * symmetric cropping
+ */
+ u32 w = reso.pin_width[IMGU_ABI_OSYS_PIN_VF] -
+ frame_params[IMGU_ABI_OSYS_PIN_VF].width;
+ u32 h = reso.pin_height[IMGU_ABI_OSYS_PIN_VF] -
+ frame_params[IMGU_ABI_OSYS_PIN_VF].height;
+
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_left =
+ roundclosest_down(w / 2, IMGU_OSYS_DMA_CROP_W_LIMIT);
+ frame_params[IMGU_ABI_OSYS_PIN_VF].crop_top =
+ roundclosest_down(h / 2, IMGU_OSYS_DMA_CROP_H_LIMIT);
+
+ if (reso.input_height % 4 || reso.input_width % 8) {
+ dev_err(css->dev, "OSYS input width is not multiple of 8 or\n");
+ dev_err(css->dev, "height is not multiple of 4\n");
+ return -EINVAL;
+ }
+ }
+
+ /* Stripe parameters */
+
+ if (frame_params[IMGU_ABI_OSYS_PIN_VF].enable) {
+ output_width = reso.pin_width[IMGU_ABI_OSYS_PIN_VF];
+ } else {
+ /*
+ * in case scaler output is not enabled
+ * take output width as input width since
+ * there is no scaling at main pin.
+ * Due to the fact that main pin can be different
+ * from input resolution to osys in the case of cropping,
+ * main pin resolution is not taken.
+ */
+ output_width = reso.input_width;
+ }
+
+ for (s = 0; s < stripes; s++) {
+ int stripe_offset_inp_y = 0;
+ int stripe_offset_inp_uv = 0;
+ int stripe_offset_out_y = 0;
+ int stripe_offset_out_uv = 0;
+ int stripe_phase_init_y = scaler_luma->phase_init;
+ int stripe_phase_init_uv = scaler_chroma->phase_init;
+ int stripe_offset_blk_y = 0;
+ int stripe_offset_blk_uv = 0;
+ int stripe_offset_col_y = 0;
+ int stripe_offset_col_uv = 0;
+ int stripe_pad_left_y = scaler_luma->pad_left;
+ int stripe_pad_left_uv = scaler_chroma->pad_left;
+ int stripe_pad_right_y = scaler_luma->pad_right;
+ int stripe_pad_right_uv = scaler_chroma->pad_right;
+ int stripe_crop_left_y = scaler_luma->crop_left;
+ int stripe_crop_left_uv = scaler_chroma->crop_left;
+ int stripe_input_width_y = reso.input_width;
+ int stripe_input_width_uv = 0;
+ int stripe_output_width_y = output_width;
+ int stripe_output_width_uv = 0;
+ int chunk_floor_y = 0;
+ int chunk_floor_uv = 0;
+ int chunk_ceil_uv = 0;
+
+ if (stripes > 1) {
+ if (s > 0) {
+ /* Calculate stripe offsets */
+ stripe_offset_out_y =
+ output_width * s / stripes;
+ stripe_offset_out_y =
+ rounddown(stripe_offset_out_y,
+ IPU3_UAPI_ISP_VEC_ELEMS);
+ stripe_offset_out_uv = stripe_offset_out_y /
+ IMGU_LUMA_TO_CHROMA_RATIO;
+ stripe_offset_inp_y =
+ ipu3_css_osys_calc_stripe_offset(
+ stripe_offset_out_y,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_luma->phase_init,
+ scaler_luma->phase_step,
+ scaler_luma->pad_left);
+ stripe_offset_inp_uv =
+ ipu3_css_osys_calc_stripe_offset(
+ stripe_offset_out_uv,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_chroma->phase_init,
+ scaler_chroma->phase_step,
+ scaler_chroma->pad_left);
+
+ /* Calculate stripe phase init */
+ stripe_phase_init_y =
+ ipu3_css_osys_calc_stripe_phase_init(
+ stripe_offset_out_y,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_luma->phase_init,
+ scaler_luma->phase_step,
+ scaler_luma->pad_left);
+ stripe_phase_init_uv =
+ ipu3_css_osys_calc_stripe_phase_init(
+ stripe_offset_out_uv,
+ IMGU_OSYS_FIR_PHASES,
+ scaler_chroma->phase_init,
+ scaler_chroma->phase_step,
+ scaler_chroma->pad_left);
+
+ /*
+ * Chunk boundary corner case - luma and chroma
+ * start from different input chunks.
+ */
+ chunk_floor_y = rounddown(stripe_offset_inp_y,
+ reso.chunk_width);
+ chunk_floor_uv =
+ rounddown(stripe_offset_inp_uv,
+ reso.chunk_width /
+ IMGU_LUMA_TO_CHROMA_RATIO);
+
+ if (chunk_floor_y != chunk_floor_uv *
+ IMGU_LUMA_TO_CHROMA_RATIO) {
+ /*
+ * Match starting luma/chroma chunks.
+ * Decrease offset for UV and add output
+ * cropping.
+ */
+ stripe_offset_inp_uv -= 1;
+ stripe_crop_left_uv += 1;
+ stripe_phase_init_uv -=
+ scaler_luma->phase_step;
+ if (stripe_phase_init_uv < 0)
+ stripe_phase_init_uv =
+ stripe_phase_init_uv +
+ IMGU_OSYS_FIR_PHASES;
+ }
+ /*
+ * FW workaround for a HW bug: if the first
+ * chroma pixel is generated exactly at the end
+ * of chunck scaler HW may not output the pixel
+ * for downscale factors smaller than 1.5
+ * (timing issue).
+ */
+ chunk_ceil_uv =
+ roundup(stripe_offset_inp_uv,
+ reso.chunk_width /
+ IMGU_LUMA_TO_CHROMA_RATIO);
+
+ if (stripe_offset_inp_uv ==
+ chunk_ceil_uv - IMGU_OSYS_TAPS_UV) {
+ /*
+ * Decrease input offset and add
+ * output cropping
+ */
+ stripe_offset_inp_uv -= 1;
+ stripe_phase_init_uv -=
+ scaler_luma->phase_step;
+ if (stripe_phase_init_uv < 0) {
+ stripe_phase_init_uv +=
+ IMGU_OSYS_FIR_PHASES;
+ stripe_crop_left_uv += 1;
+ }
+ }
+
+ /*
+ * Calculate block and column offsets for the
+ * input stripe
+ */
+ stripe_offset_blk_y =
+ rounddown(stripe_offset_inp_y,
+ IMGU_INPUT_BLOCK_WIDTH);
+ stripe_offset_blk_uv =
+ rounddown(stripe_offset_inp_uv,
+ IMGU_INPUT_BLOCK_WIDTH /
+ IMGU_LUMA_TO_CHROMA_RATIO);
+ stripe_offset_col_y = stripe_offset_inp_y -
+ stripe_offset_blk_y;
+ stripe_offset_col_uv = stripe_offset_inp_uv -
+ stripe_offset_blk_uv;
+
+ /* Left padding is only for the first stripe */
+ stripe_pad_left_y = 0;
+ stripe_pad_left_uv = 0;
+ }
+
+ /* Right padding is only for the last stripe */
+ if (s < stripes - 1) {
+ int next_offset;
+
+ stripe_pad_right_y = 0;
+ stripe_pad_right_uv = 0;
+
+ next_offset = output_width * (s + 1) / stripes;
+ next_offset = rounddown(next_offset, 64);
+ stripe_output_width_y = next_offset -
+ stripe_offset_out_y;
+ } else {
+ stripe_output_width_y = output_width -
+ stripe_offset_out_y;
+ }
+
+ /* Calculate target output stripe width */
+ stripe_output_width_uv = stripe_output_width_y /
+ IMGU_LUMA_TO_CHROMA_RATIO;
+ /* Calculate input stripe width */
+ stripe_input_width_y = stripe_offset_col_y +
+ ipu3_css_osys_calc_inp_stripe_width(
+ stripe_output_width_y,
+ IMGU_OSYS_FIR_PHASES,
+ stripe_phase_init_y,
+ scaler_luma->phase_step,
+ IMGU_OSYS_TAPS_Y,
+ stripe_pad_left_y,
+ stripe_pad_right_y);
+
+ stripe_input_width_uv = stripe_offset_col_uv +
+ ipu3_css_osys_calc_inp_stripe_width(
+ stripe_output_width_uv,
+ IMGU_OSYS_FIR_PHASES,
+ stripe_phase_init_uv,
+ scaler_chroma->phase_step,
+ IMGU_OSYS_TAPS_UV,
+ stripe_pad_left_uv,
+ stripe_pad_right_uv);
+
+ stripe_input_width_uv = max(DIV_ROUND_UP(
+ stripe_input_width_y,
+ IMGU_LUMA_TO_CHROMA_RATIO),
+ stripe_input_width_uv);
+
+ stripe_input_width_y = stripe_input_width_uv *
+ IMGU_LUMA_TO_CHROMA_RATIO;
+
+ if (s >= stripes - 1) {
+ stripe_input_width_y = reso.input_width -
+ stripe_offset_blk_y;
+ /*
+ * The scaler requires that the last stripe
+ * spans at least two input blocks.
+ */
+ }
+
+ /*
+ * Spec: input stripe width must be a multiple of 8.
+ * Increase the input width and recalculate the output
+ * width. This may produce an extra column of junk
+ * blocks which will be overwritten by the
+ * next stripe.
+ */
+ stripe_input_width_y = ALIGN(stripe_input_width_y, 8);
+ stripe_output_width_y =
+ ipu3_css_osys_out_stripe_width(
+ stripe_input_width_y,
+ IMGU_OSYS_FIR_PHASES,
+ stripe_phase_init_y,
+ scaler_luma->phase_step,
+ IMGU_OSYS_TAPS_Y,
+ stripe_pad_left_y,
+ stripe_pad_right_y,
+ stripe_offset_col_y);
+
+ stripe_output_width_y =
+ rounddown(stripe_output_width_y,
+ IMGU_LUMA_TO_CHROMA_RATIO);
+ }
+ /*
+ * Following section executes and process parameters
+ * for both cases - Striping or No Striping.
+ */
+ {
+ unsigned int i;
+ int pin_scale = 0;
+ /*Input resolution */
+
+ stripe_params[s].input_width = stripe_input_width_y;
+ stripe_params[s].input_height = reso.input_height;
+
+ for (i = 0; i < IMGU_ABI_OSYS_PINS; i++) {
+ if (frame_params[i].scaled) {
+ /*
+ * Output stripe resolution and offset
+ * as produced by the scaler; actual
+ * output resolution may be slightly
+ * smaller.
+ */
+ stripe_params[s].output_width[i] =
+ stripe_output_width_y;
+ stripe_params[s].output_height[i] =
+ reso.pin_height[i];
+ stripe_params[s].output_offset[i] =
+ stripe_offset_out_y;
+
+ pin_scale += frame_params[i].scaled;
+ } else {
+ /* Unscaled pin */
+ stripe_params[s].output_width[i] =
+ stripe_params[s].input_width;
+ stripe_params[s].output_height[i] =
+ stripe_params[s].input_height;
+ stripe_params[s].output_offset[i] =
+ stripe_offset_blk_y;
+ }
+ }
+
+ /* If no pin use scale, we use BYPASS mode */
+ stripe_params[s].processing_mode = procmode;
+ stripe_params[s].phase_step = scaler_luma->phase_step;
+ stripe_params[s].exp_shift = scaler_luma->exp_shift;
+ stripe_params[s].phase_init_left_y =
+ stripe_phase_init_y;
+ stripe_params[s].phase_init_left_uv =
+ stripe_phase_init_uv;
+ stripe_params[s].phase_init_top_y =
+ scaler_luma->phase_init;
+ stripe_params[s].phase_init_top_uv =
+ scaler_chroma->phase_init;
+ stripe_params[s].pad_left_y = stripe_pad_left_y;
+ stripe_params[s].pad_left_uv = stripe_pad_left_uv;
+ stripe_params[s].pad_right_y = stripe_pad_right_y;
+ stripe_params[s].pad_right_uv = stripe_pad_right_uv;
+ stripe_params[s].pad_top_y = scaler_luma->pad_left;
+ stripe_params[s].pad_top_uv = scaler_chroma->pad_left;
+ stripe_params[s].pad_bottom_y = scaler_luma->pad_right;
+ stripe_params[s].pad_bottom_uv =
+ scaler_chroma->pad_right;
+ stripe_params[s].crop_left_y = stripe_crop_left_y;
+ stripe_params[s].crop_top_y = scaler_luma->crop_top;
+ stripe_params[s].crop_left_uv = stripe_crop_left_uv;
+ stripe_params[s].crop_top_uv = scaler_chroma->crop_top;
+ stripe_params[s].start_column_y = stripe_offset_col_y;
+ stripe_params[s].start_column_uv = stripe_offset_col_uv;
+ stripe_params[s].chunk_width = reso.chunk_width;
+ stripe_params[s].chunk_height = reso.chunk_height;
+ stripe_params[s].block_width = reso.block_width;
+ stripe_params[s].block_height = reso.block_height;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function configures the Output Formatter System, given the number of
+ * stripes, scaler luma and chrome parameters
+ */
+static void ipu3_css_osys_calc(struct ipu3_css *css, unsigned int stripes,
+ struct imgu_abi_osys_config *osys,
+ struct ipu3_css_scaler_info *scaler_luma,
+ struct ipu3_css_scaler_info *scaler_chroma,
+ struct imgu_abi_stripes block_stripes[])
+{
+ struct ipu3_css_frame_params frame_params[IMGU_ABI_OSYS_PINS];
+ struct ipu3_css_stripe_params stripe_params[IPU3_UAPI_MAX_STRIPES];
+ struct imgu_abi_osys_formatter_params *param;
+ unsigned int pin, s;
+
+ memset(osys, 0, sizeof(*osys));
+
+ /* Compute the frame and stripe params */
+ ipu3_css_osys_calc_frame_and_stripe_params(css, stripes, osys,
+ scaler_luma, scaler_chroma,
+ frame_params, stripe_params);
+
+ /* Output formatter system parameters */
+
+ for (s = 0; s < stripes; s++) {
+ struct imgu_abi_osys_scaler_params *scaler =
+ &osys->scaler[s].param;
+ int fifo_addr_fmt = IMGU_FIFO_ADDR_SCALER_TO_FMT;
+ int fifo_addr_ack = IMGU_FIFO_ADDR_SCALER_TO_SP;
+
+ /* OUTPUT 0 / PIN 0 is only Scaler output */
+ scaler->inp_buf_y_st_addr = IMGU_VMEM1_INP_BUF_ADDR;
+
+ /*
+ * = (IMGU_OSYS_BLOCK_WIDTH / IMGU_VMEM1_ELEMS_PER_VEC)
+ * = (2 * IPU3_UAPI_ISP_VEC_ELEMS) /
+ * (IMGU_HIVE_OF_SYS_OF_SYSTEM_NWAYS)
+ * = 2 * 64 / 32 = 4
+ */
+ scaler->inp_buf_y_line_stride = IMGU_VMEM1_Y_STRIDE;
+ /*
+ * = (IMGU_VMEM1_V_OFFSET + VMEM1_uv_size)
+ * = (IMGU_VMEM1_U_OFFSET + VMEM1_uv_size) +
+ * (VMEM1_y_size / 4)
+ * = (VMEM1_y_size) + (VMEM1_y_size / 4) +
+ * (IMGU_OSYS_BLOCK_HEIGHT * IMGU_VMEM1_Y_STRIDE)/4
+ * = (IMGU_OSYS_BLOCK_HEIGHT * IMGU_VMEM1_Y_STRIDE)
+ */
+ scaler->inp_buf_y_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->inp_buf_u_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ scaler->inp_buf_v_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ scaler->inp_buf_uv_line_stride = IMGU_VMEM1_UV_STRIDE;
+ scaler->inp_buf_uv_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->inp_buf_chunk_width = stripe_params[s].chunk_width;
+ scaler->inp_buf_nr_buffers = IMGU_OSYS_NUM_INPUT_BUFFERS;
+
+ /* Output buffers */
+ scaler->out_buf_y_st_addr = IMGU_VMEM1_INT_BUF_ADDR;
+ scaler->out_buf_y_line_stride = stripe_params[s].block_width /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ scaler->out_buf_y_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->out_buf_u_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ scaler->out_buf_v_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ scaler->out_buf_uv_line_stride = stripe_params[s].block_width /
+ IMGU_VMEM1_ELEMS_PER_VEC / 2;
+ scaler->out_buf_uv_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ scaler->out_buf_nr_buffers = IMGU_OSYS_NUM_INTERM_BUFFERS;
+
+ /* Intermediate buffers */
+ scaler->int_buf_y_st_addr = IMGU_VMEM2_BUF_Y_ADDR;
+ scaler->int_buf_y_line_stride = IMGU_VMEM2_BUF_Y_STRIDE;
+ scaler->int_buf_u_st_addr = IMGU_VMEM2_BUF_U_ADDR;
+ scaler->int_buf_v_st_addr = IMGU_VMEM2_BUF_V_ADDR;
+ scaler->int_buf_uv_line_stride = IMGU_VMEM2_BUF_UV_STRIDE;
+ scaler->int_buf_height = IMGU_VMEM2_LINES_PER_BLOCK;
+ scaler->int_buf_chunk_width = stripe_params[s].chunk_height;
+ scaler->int_buf_chunk_height = stripe_params[s].block_width;
+
+ /* Context buffers */
+ scaler->ctx_buf_hor_y_st_addr = IMGU_VMEM3_HOR_Y_ADDR;
+ scaler->ctx_buf_hor_u_st_addr = IMGU_VMEM3_HOR_U_ADDR;
+ scaler->ctx_buf_hor_v_st_addr = IMGU_VMEM3_HOR_V_ADDR;
+ scaler->ctx_buf_ver_y_st_addr = IMGU_VMEM3_VER_Y_ADDR;
+ scaler->ctx_buf_ver_u_st_addr = IMGU_VMEM3_VER_U_ADDR;
+ scaler->ctx_buf_ver_v_st_addr = IMGU_VMEM3_VER_V_ADDR;
+
+ /* Addresses for release-input and process-output tokens */
+ scaler->release_inp_buf_addr = fifo_addr_ack;
+ scaler->release_inp_buf_en = 1;
+ scaler->release_out_buf_en = 1;
+ scaler->process_out_buf_addr = fifo_addr_fmt;
+
+ /* Settings dimensions, padding, cropping */
+ scaler->input_image_y_width = stripe_params[s].input_width;
+ scaler->input_image_y_height = stripe_params[s].input_height;
+ scaler->input_image_y_start_column =
+ stripe_params[s].start_column_y;
+ scaler->input_image_uv_start_column =
+ stripe_params[s].start_column_uv;
+ scaler->input_image_y_left_pad = stripe_params[s].pad_left_y;
+ scaler->input_image_uv_left_pad = stripe_params[s].pad_left_uv;
+ scaler->input_image_y_right_pad = stripe_params[s].pad_right_y;
+ scaler->input_image_uv_right_pad =
+ stripe_params[s].pad_right_uv;
+ scaler->input_image_y_top_pad = stripe_params[s].pad_top_y;
+ scaler->input_image_uv_top_pad = stripe_params[s].pad_top_uv;
+ scaler->input_image_y_bottom_pad =
+ stripe_params[s].pad_bottom_y;
+ scaler->input_image_uv_bottom_pad =
+ stripe_params[s].pad_bottom_uv;
+ scaler->processing_mode = stripe_params[s].processing_mode;
+ scaler->scaling_ratio = stripe_params[s].phase_step;
+ scaler->y_left_phase_init = stripe_params[s].phase_init_left_y;
+ scaler->uv_left_phase_init =
+ stripe_params[s].phase_init_left_uv;
+ scaler->y_top_phase_init = stripe_params[s].phase_init_top_y;
+ scaler->uv_top_phase_init = stripe_params[s].phase_init_top_uv;
+ scaler->coeffs_exp_shift = stripe_params[s].exp_shift;
+ scaler->out_y_left_crop = stripe_params[s].crop_left_y;
+ scaler->out_uv_left_crop = stripe_params[s].crop_left_uv;
+ scaler->out_y_top_crop = stripe_params[s].crop_top_y;
+ scaler->out_uv_top_crop = stripe_params[s].crop_top_uv;
+
+ for (pin = 0; pin < IMGU_ABI_OSYS_PINS; pin++) {
+ int in_fifo_addr;
+ int out_fifo_addr;
+ int block_width_vecs;
+ int input_width_s;
+ int input_width_vecs;
+ int input_buf_y_st_addr;
+ int input_buf_u_st_addr;
+ int input_buf_v_st_addr;
+ int input_buf_y_line_stride;
+ int input_buf_uv_line_stride;
+ int output_buf_y_line_stride;
+ int output_buf_uv_line_stride;
+ int output_buf_nr_y_lines;
+ int block_height;
+ int block_width;
+ struct imgu_abi_osys_frame_params *fr_pr;
+
+ fr_pr = &osys->frame[pin].param;
+
+ /* Frame parameters */
+ fr_pr->enable = frame_params[pin].enable;
+ fr_pr->format = frame_params[pin].format;
+ fr_pr->mirror = frame_params[pin].mirror;
+ fr_pr->flip = frame_params[pin].flip;
+ fr_pr->tiling = frame_params[pin].tiling;
+ fr_pr->width = frame_params[pin].width;
+ fr_pr->height = frame_params[pin].height;
+ fr_pr->stride = frame_params[pin].stride;
+ fr_pr->scaled = frame_params[pin].scaled;
+
+ /* Stripe parameters */
+ osys->stripe[s].crop_top[pin] =
+ frame_params[pin].crop_top;
+ osys->stripe[s].input_width =
+ stripe_params[s].input_width;
+ osys->stripe[s].input_height =
+ stripe_params[s].input_height;
+ osys->stripe[s].block_height =
+ stripe_params[s].block_height;
+ osys->stripe[s].block_width =
+ stripe_params[s].block_width;
+ osys->stripe[s].output_width[pin] =
+ stripe_params[s].output_width[pin];
+ osys->stripe[s].output_height[pin] =
+ stripe_params[s].output_height[pin];
+
+ if (s == 0) {
+ /* Only first stripe should do left cropping */
+ osys->stripe[s].crop_left[pin] =
+ frame_params[pin].crop_left;
+ osys->stripe[s].output_offset[pin] =
+ stripe_params[s].output_offset[pin];
+ } else {
+ /*
+ * Stripe offset for other strips should be
+ * adjusted according to the cropping done
+ * at the first strip
+ */
+ osys->stripe[s].crop_left[pin] = 0;
+ osys->stripe[s].output_offset[pin] =
+ (stripe_params[s].output_offset[pin] -
+ osys->stripe[0].crop_left[pin]);
+ }
+
+ if (!frame_params[pin].enable)
+ continue;
+
+ /* Formatter: configurations */
+
+ /*
+ * Get the dimensions of the input blocks of the
+ * formatter, which is the same as the output
+ * blocks of the scaler.
+ */
+ if (frame_params[pin].scaled) {
+ block_height = stripe_params[s].block_height;
+ block_width = stripe_params[s].block_width;
+ } else {
+ block_height = IMGU_OSYS_BLOCK_HEIGHT;
+ block_width = IMGU_OSYS_BLOCK_WIDTH;
+ }
+ block_width_vecs =
+ block_width / IMGU_VMEM1_ELEMS_PER_VEC;
+ /*
+ * The input/output line stride depends on the
+ * block size.
+ */
+ input_buf_y_line_stride = block_width_vecs;
+ input_buf_uv_line_stride = block_width_vecs / 2;
+ output_buf_y_line_stride = block_width_vecs;
+ output_buf_uv_line_stride = block_width_vecs / 2;
+ output_buf_nr_y_lines = block_height;
+ if (frame_params[pin].format ==
+ IMGU_ABI_OSYS_FORMAT_NV12 ||
+ frame_params[pin].format ==
+ IMGU_ABI_OSYS_FORMAT_NV21)
+ output_buf_uv_line_stride =
+ output_buf_y_line_stride;
+
+ /*
+ * Tiled outputs use a different output buffer
+ * configuration. The input (= scaler output) block
+ * width translates to a tile height, and the block
+ * height to the tile width. The default block size of
+ * 128x32 maps exactly onto a 4kB tile (512x8) for Y.
+ * For UV, the tile width is always half.
+ */
+ if (frame_params[pin].tiling) {
+ output_buf_nr_y_lines = 8;
+ output_buf_y_line_stride = 512 /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ output_buf_uv_line_stride = 256 /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ }
+
+ /*
+ * Store the output buffer line stride. Will be
+ * used to compute buffer offsets in boundary
+ * conditions when output blocks are partially
+ * outside the image.
+ */
+ osys->stripe[s].buf_stride[pin] =
+ output_buf_y_line_stride *
+ IMGU_HIVE_OF_SYS_OF_SYSTEM_NWAYS;
+ if (frame_params[pin].scaled) {
+ /*
+ * The input buffs are the intermediate
+ * buffers (scalers' output)
+ */
+ input_buf_y_st_addr = IMGU_VMEM1_INT_BUF_ADDR;
+ input_buf_u_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ input_buf_v_st_addr = IMGU_VMEM1_INT_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ } else {
+ /*
+ * The input bufferss are the buffers
+ * filled by the SP
+ */
+ input_buf_y_st_addr = IMGU_VMEM1_INP_BUF_ADDR;
+ input_buf_u_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_U_OFFSET;
+ input_buf_v_st_addr = IMGU_VMEM1_INP_BUF_ADDR +
+ IMGU_VMEM1_V_OFFSET;
+ }
+
+ /*
+ * The formatter input width must be rounded to
+ * the block width. Otherwise the formatter will
+ * not recognize the end of the line, resulting
+ * in incorrect tiling (system may hang!) and
+ * possibly other problems.
+ */
+ input_width_s =
+ roundup(stripe_params[s].output_width[pin],
+ block_width);
+ input_width_vecs = input_width_s /
+ IMGU_VMEM1_ELEMS_PER_VEC;
+ out_fifo_addr = IMGU_FIFO_ADDR_FMT_TO_SP;
+ /*
+ * Process-output tokens must be sent to the SP.
+ * When scaling, the release-input tokens can be
+ * sent directly to the scaler, otherwise the
+ * formatter should send them to the SP.
+ */
+ if (frame_params[pin].scaled)
+ in_fifo_addr = IMGU_FIFO_ADDR_FMT_TO_SCALER;
+ else
+ in_fifo_addr = IMGU_FIFO_ADDR_FMT_TO_SP;
+
+ /* Formatter */
+ param = &osys->formatter[s][pin].param;
+
+ param->format = frame_params[pin].format;
+ param->flip = frame_params[pin].flip;
+ param->mirror = frame_params[pin].mirror;
+ param->tiling = frame_params[pin].tiling;
+ param->reduce_range = frame_params[pin].reduce_range;
+ param->alpha_blending = 0;
+ param->release_inp_addr = in_fifo_addr;
+ param->release_inp_en = 1;
+ param->process_out_buf_addr = out_fifo_addr;
+ param->image_width_vecs = input_width_vecs;
+ param->image_height_lines =
+ stripe_params[s].output_height[pin];
+ param->inp_buff_y_st_addr = input_buf_y_st_addr;
+ param->inp_buff_y_line_stride = input_buf_y_line_stride;
+ param->inp_buff_y_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ param->int_buff_u_st_addr = input_buf_u_st_addr;
+ param->int_buff_v_st_addr = input_buf_v_st_addr;
+ param->inp_buff_uv_line_stride =
+ input_buf_uv_line_stride;
+ param->inp_buff_uv_buffer_stride = IMGU_VMEM1_BUF_SIZE;
+ param->out_buff_level = 0;
+ param->out_buff_nr_y_lines = output_buf_nr_y_lines;
+ param->out_buff_u_st_offset = IMGU_VMEM1_U_OFFSET;
+ param->out_buff_v_st_offset = IMGU_VMEM1_V_OFFSET;
+ param->out_buff_y_line_stride =
+ output_buf_y_line_stride;
+ param->out_buff_uv_line_stride =
+ output_buf_uv_line_stride;
+ param->hist_buff_st_addr = IMGU_VMEM1_HST_BUF_ADDR;
+ param->hist_buff_line_stride =
+ IMGU_VMEM1_HST_BUF_STRIDE;
+ param->hist_buff_nr_lines = IMGU_VMEM1_HST_BUF_NLINES;
+ }
+ }
+
+ block_stripes[0].offset = 0;
+ if (stripes <= 1) {
+ block_stripes[0].width = stripe_params[0].input_width;
+ block_stripes[0].height = stripe_params[0].input_height;
+ } else {
+ struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ unsigned int sp_block_width = IPU3_UAPI_ISP_VEC_ELEMS *
+ bi->info.isp.sp.block.block_width;
+
+ block_stripes[0].width = roundup(stripe_params[0].input_width,
+ sp_block_width);
+ block_stripes[1].offset =
+ rounddown(css->rect[IPU3_CSS_RECT_GDC].width -
+ stripe_params[1].input_width, sp_block_width);
+ block_stripes[1].width =
+ roundup(css->rect[IPU3_CSS_RECT_GDC].width -
+ block_stripes[1].offset, sp_block_width);
+ block_stripes[0].height = css->rect[IPU3_CSS_RECT_GDC].height;
+ block_stripes[1].height = block_stripes[0].height;
+ }
+}
+
+/*********************** Mostly 3A operations ******************************/
+
+/*
+ * This function creates a "TO-DO list" (operations) for the sp code.
+ *
+ * There are 2 types of operations:
+ * 1. Transfer: Issue DMA transfer request for copying grid cells from DDR to
+ * accelerator space (NOTE that this space is limited) associated data:
+ * DDR address + accelerator's config set index(acc's address).
+ *
+ * 2. Issue "Process Lines Command" to shd accelerator
+ * associated data: #lines + which config set to use (actually, accelerator
+ * will use x AND (x+1)%num_of_sets - NOTE that this implies the restriction
+ * of not touching config sets x & (x+1)%num_of_sets when process_lines(x)
+ * is active).
+ *
+ * Basically there are 2 types of operations "chunks":
+ * 1. "initial chunk": Initially, we do as much transfers as we can (and need)
+ * [0 - max sets(3) ] followed by 1 or 2 "process lines" operations.
+ *
+ * 2. "regular chunk" - 1 transfer followed by 1 process line operation.
+ * (in some cases we might need additional transfer ate the last chunk).
+ *
+ * for some case:
+ * --> init
+ * tr (0)
+ * tr (1)
+ * tr (2)
+ * pl (0)
+ * pl (1)
+ * --> ack (0)
+ * tr (3)
+ * pl (2)
+ * --> ack (1)
+ * pl (3)
+ * --> ack (2)
+ * do nothing
+ * --> ack (3)
+ * do nothing
+ */
+
+static int
+ipu3_css_shd_ops_calc(struct imgu_abi_shd_intra_frame_operations_data *ops,
+ const struct ipu3_uapi_shd_grid_config *grid,
+ unsigned int image_height)
+{
+ unsigned int block_height = 1 << grid->block_height_log2;
+ unsigned int grid_height_per_slice = grid->grid_height_per_slice;
+ unsigned int set_height = grid_height_per_slice * block_height;
+
+ /* We currently support only abs(y_start) > grid_height_per_slice */
+ unsigned int positive_y_start = (unsigned int)-grid->y_start;
+ unsigned int first_process_lines =
+ set_height - (positive_y_start % set_height);
+ unsigned int last_set_height;
+ unsigned int num_of_sets;
+
+ struct imgu_abi_acc_operation *p_op;
+ struct imgu_abi_acc_process_lines_cmd_data *p_pl;
+ struct imgu_abi_shd_transfer_luts_set_data *p_tr;
+
+ unsigned int op_idx, pl_idx, tr_idx;
+ unsigned char tr_set_num, pl_cfg_set;
+
+ /*
+ * When the number of lines for the last process lines command
+ * is equal to a set height, we need another line of grid cell -
+ * additional transfer is required.
+ */
+ unsigned char last_tr = 0;
+
+ /* Add "process lines" command to the list of operations */
+ bool add_pl;
+ /* Add DMA xfer (config set) command to the list of ops */
+ bool add_tr;
+
+ /*
+ * Available partial grid (the part that fits into #IMGU_SHD_SETS sets)
+ * doesn't cover whole frame - need to process in chunks
+ */
+ if (image_height > first_process_lines) {
+ last_set_height =
+ (image_height - first_process_lines) % set_height;
+ num_of_sets = last_set_height > 0 ?
+ (image_height - first_process_lines) / set_height + 2 :
+ (image_height - first_process_lines) / set_height + 1;
+ last_tr = (set_height - last_set_height <= block_height ||
+ last_set_height == 0) ? 1 : 0;
+ } else { /* partial grid covers whole frame */
+ last_set_height = 0;
+ num_of_sets = 1;
+ first_process_lines = image_height;
+ last_tr = set_height - image_height <= block_height ? 1 : 0;
+ }
+
+ /* Init operations lists and counters */
+ p_op = ops->operation_list;
+ op_idx = 0;
+ p_pl = ops->process_lines_data;
+ pl_idx = 0;
+ p_tr = ops->transfer_data;
+ tr_idx = 0;
+
+ memset(ops, 0, sizeof(*ops));
+
+ /* Cyclic counters that holds config set number [0,IMGU_SHD_SETS) */
+ tr_set_num = 0;
+ pl_cfg_set = 0;
+
+ /*
+ * Always start with a transfer - process lines command must be
+ * initiated only after appropriate config sets are in place
+ * (2 configuration sets per process line command, except for last one).
+ */
+ add_pl = false;
+ add_tr = true;
+
+ while (add_pl || add_tr) {
+ /* Transfer ops */
+ if (add_tr) {
+ if (op_idx >= IMGU_ABI_SHD_MAX_OPERATIONS ||
+ tr_idx >= IMGU_ABI_SHD_MAX_TRANSFERS)
+ return -EINVAL;
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_TRANSFER_DATA;
+ p_op[op_idx].op_indicator = IMGU_ABI_ACC_OP_IDLE;
+ op_idx++;
+ p_tr[tr_idx].set_number = tr_set_num;
+ tr_idx++;
+ tr_set_num = (tr_set_num + 1) % IMGU_SHD_SETS;
+ }
+
+ /* Process-lines ops */
+ if (add_pl) {
+ if (op_idx >= IMGU_ABI_SHD_MAX_OPERATIONS ||
+ pl_idx >= IMGU_ABI_SHD_MAX_PROCESS_LINES)
+ return -EINVAL;
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_PROCESS_LINES;
+
+ /*
+ * In case we have 2 process lines commands -
+ * don't stop after the first one
+ */
+ if (pl_idx == 0 && num_of_sets != 1)
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+ /*
+ * Initiate last process lines command -
+ * end of operation list.
+ */
+ else if (pl_idx == num_of_sets - 1)
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_OPS;
+ /*
+ * Intermediate process line command - end of operation
+ * "chunk" (meaning few "transfers" followed by few
+ * "process lines" commands).
+ */
+ else
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+
+ op_idx++;
+
+ /* first process line operation */
+ if (pl_idx == 0)
+ p_pl[pl_idx].lines = first_process_lines;
+ /* Last process line operation */
+ else if (pl_idx == num_of_sets - 1 &&
+ last_set_height > 0)
+ p_pl[pl_idx].lines = last_set_height;
+ else /* "regular" process lines operation */
+ p_pl[pl_idx].lines = set_height;
+
+ p_pl[pl_idx].cfg_set = pl_cfg_set;
+ pl_idx++;
+ pl_cfg_set = (pl_cfg_set + 1) % IMGU_SHD_SETS;
+ }
+
+ /*
+ * Initially, we always transfer
+ * min(IMGU_SHD_SETS, num_of_sets) - after that we fill in the
+ * corresponding process lines commands.
+ */
+ if (tr_idx == IMGU_SHD_SETS ||
+ tr_idx == num_of_sets + last_tr) {
+ add_tr = false;
+ add_pl = true;
+ }
+
+ /*
+ * We have finished the "initial" operations chunk -
+ * be ready to get more chunks.
+ */
+ if (pl_idx == 2) {
+ add_tr = true;
+ add_pl = true;
+ }
+
+ /* Stop conditions for each operation type */
+ if (tr_idx == num_of_sets + last_tr)
+ add_tr = false;
+ if (pl_idx == num_of_sets)
+ add_pl = false;
+ }
+
+ return 0;
+}
+
+/*
+ * The follow handshake procotol is the same for AF, AWB and AWB FR.
+ *
+ * for n sets of meta-data, the flow is:
+ * --> init
+ * process-lines (0)
+ * process-lines (1) eoc
+ * --> ack (0)
+ * read-meta-data (0)
+ * process-lines (2) eoc
+ * --> ack (1)
+ * read-meta-data (1)
+ * process-lines (3) eoc
+ * ...
+ *
+ * --> ack (n-3)
+ * read-meta-data (n-3)
+ * process-lines (n-1) eoc
+ * --> ack (n-2)
+ * read-meta-data (n-2) eoc
+ * --> ack (n-1)
+ * read-meta-data (n-1) eof
+ *
+ * for 2 sets we get:
+ * --> init
+ * pl (0)
+ * pl (1) eoc
+ * --> ack (0)
+ * pl (2) - rest of image, if applicable)
+ * rmd (0) eoc
+ * --> ack (1)
+ * rmd (1) eof
+ * --> (ack (2))
+ * do nothing
+ *
+ * for only one set:
+ *
+ * --> init
+ * pl(0) eoc
+ * --> ack (0)
+ * rmd (0) eof
+ *
+ * grid smaller than image case
+ * for example 128x128 grid (block size 8x8, 16x16 num of blocks)
+ * start at (0,0)
+ * 1st set holds 160 cells - 10 blocks vertical, 16 horizontal
+ * => 1st process lines = 80
+ * we're left with 128-80=48 lines (6 blocks vertical)
+ * => 2nd process lines = 48
+ * last process lines to cover the image - image_height - 128
+ *
+ * --> init
+ * pl (0) first
+ * pl (1) last-in-grid
+ * --> ack (0)
+ * rmd (0)
+ * pl (2) after-grid
+ * --> ack (1)
+ * rmd (1) eof
+ * --> ack (2)
+ * do nothing
+ */
+struct process_lines {
+ unsigned int image_height;
+ unsigned short grid_height;
+ unsigned short block_height;
+ unsigned short y_start;
+ unsigned char grid_height_per_slice;
+
+ unsigned short max_op; /* max operation */
+ unsigned short max_tr; /* max transaction */
+ unsigned char acc_enable;
+};
+
+/* Helper to config intra_frame_operations_data. */
+static int
+ipu3_css_acc_process_lines(const struct process_lines *pl,
+ struct imgu_abi_acc_operation *p_op,
+ struct imgu_abi_acc_process_lines_cmd_data *p_pl,
+ struct imgu_abi_acc_transfer_op_data *p_tr)
+{
+ unsigned short op_idx = 0, pl_idx = 0, tr_idx = 0;
+ unsigned char tr_set_num = 0, pl_cfg_set = 0;
+ const unsigned short grid_last_line =
+ pl->y_start + pl->grid_height * pl->block_height;
+ const unsigned short process_lines =
+ pl->grid_height_per_slice * pl->block_height;
+
+ unsigned int process_lines_after_grid;
+ unsigned short first_process_lines;
+ unsigned short last_process_lines_in_grid;
+
+ unsigned short num_of_process_lines;
+ unsigned short num_of_sets;
+
+ if (pl->grid_height_per_slice == 0)
+ return -EINVAL;
+
+ if (pl->acc_enable && grid_last_line > pl->image_height)
+ return -EINVAL;
+
+ num_of_sets = pl->grid_height / pl->grid_height_per_slice;
+ if (num_of_sets * pl->grid_height_per_slice < pl->grid_height)
+ num_of_sets++;
+
+ /* Account for two line delay inside the FF */
+ if (pl->max_op == IMGU_ABI_AF_MAX_OPERATIONS) {
+ first_process_lines = process_lines + pl->y_start + 2;
+ last_process_lines_in_grid =
+ (grid_last_line - first_process_lines) -
+ ((num_of_sets - 2) * process_lines) + 4;
+ process_lines_after_grid =
+ pl->image_height - grid_last_line - 4;
+ } else {
+ first_process_lines = process_lines + pl->y_start;
+ last_process_lines_in_grid =
+ (grid_last_line - first_process_lines) -
+ ((num_of_sets - 2) * process_lines);
+ process_lines_after_grid = pl->image_height - grid_last_line;
+ }
+
+ num_of_process_lines = num_of_sets;
+ if (process_lines_after_grid > 0)
+ num_of_process_lines++;
+
+ while (tr_idx < num_of_sets || pl_idx < num_of_process_lines) {
+ /* Read meta-data */
+ if (pl_idx >= 2 || (pl_idx == 1 && num_of_sets == 1)) {
+ if (op_idx >= pl->max_op || tr_idx >= pl->max_tr)
+ return -EINVAL;
+
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_TRANSFER_DATA;
+
+ if (tr_idx == num_of_sets - 1)
+ /* The last operation is always a tr */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_OPS;
+ else if (tr_idx == num_of_sets - 2)
+ if (process_lines_after_grid == 0)
+ /*
+ * No additional pl op left -
+ * this op is left as lats of cycle
+ */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+ else
+ /*
+ * We still have to process-lines after
+ * the grid so have one more pl op
+ */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+ else
+ /* Default - usually there's a pl after a tr */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+
+ op_idx++;
+ if (p_tr) {
+ p_tr[tr_idx].set_number = tr_set_num;
+ tr_set_num = 1 - tr_set_num;
+ }
+ tr_idx++;
+ }
+
+ /* process_lines */
+ if (pl_idx < num_of_process_lines) {
+ if (op_idx >= pl->max_op || pl_idx >= pl->max_tr)
+ return -EINVAL;
+
+ p_op[op_idx].op_type =
+ IMGU_ABI_ACC_OPTYPE_PROCESS_LINES;
+ if (pl_idx == 0)
+ if (num_of_process_lines == 1)
+ /* Only one pl op */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+ else
+ /* On init - do two pl ops */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_IDLE;
+ else
+ /* Usually pl is the end of the ack cycle */
+ p_op[op_idx].op_indicator =
+ IMGU_ABI_ACC_OP_END_OF_ACK;
+
+ op_idx++;
+
+ if (pl_idx == 0)
+ /* First process line */
+ p_pl[pl_idx].lines = first_process_lines;
+ else if (pl_idx == num_of_sets - 1)
+ /* Last in grid */
+ p_pl[pl_idx].lines = last_process_lines_in_grid;
+ else if (pl_idx == num_of_process_lines - 1)
+ /* After the grid */
+ p_pl[pl_idx].lines = process_lines_after_grid;
+ else
+ /* Inside the grid */
+ p_pl[pl_idx].lines = process_lines;
+
+ if (p_tr) {
+ p_pl[pl_idx].cfg_set = pl_cfg_set;
+ pl_cfg_set = 1 - pl_cfg_set;
+ }
+ pl_idx++;
+ }
+ }
+
+ return 0;
+}
+
+static int ipu3_css_af_ops_calc(struct ipu3_css *css,
+ struct imgu_abi_af_config *af_config)
+{
+ struct imgu_abi_af_intra_frame_operations_data *to =
+ &af_config->operations_data;
+ struct imgu_fw_info *bi = &css->fwp->binary_header[css->current_binary];
+
+ struct process_lines pl = {
+ .image_height = css->rect[IPU3_CSS_RECT_BDS].height,
+ .grid_height = af_config->config.grid_cfg.height,
+ .block_height =
+ 1 << af_config->config.grid_cfg.block_height_log2,
+ .y_start = af_config->config.grid_cfg.y_start &
+ IPU3_UAPI_GRID_START_MASK,
+ .grid_height_per_slice =
+ af_config->stripes[0].grid_cfg.height_per_slice,
+ .max_op = IMGU_ABI_AF_MAX_OPERATIONS,
+ .max_tr = IMGU_ABI_AF_MAX_TRANSFERS,
+ .acc_enable = bi->info.isp.sp.enable.af,
+ };
+
+ return ipu3_css_acc_process_lines(&pl, to->ops, to->process_lines_data,
+ NULL);
+}
+
+static int
+ipu3_css_awb_fr_ops_calc(struct ipu3_css *css,
+ struct imgu_abi_awb_fr_config *awb_fr_config)
+{
+ struct imgu_abi_awb_fr_intra_frame_operations_data *to =
+ &awb_fr_config->operations_data;
+ struct imgu_fw_info *bi = &css->fwp->binary_header[css->current_binary];
+ struct process_lines pl = {
+ .image_height = css->rect[IPU3_CSS_RECT_BDS].height,
+ .grid_height = awb_fr_config->config.grid_cfg.height,
+ .block_height =
+ 1 << awb_fr_config->config.grid_cfg.block_height_log2,
+ .y_start = awb_fr_config->config.grid_cfg.y_start &
+ IPU3_UAPI_GRID_START_MASK,
+ .grid_height_per_slice =
+ awb_fr_config->stripes[0].grid_cfg.height_per_slice,
+ .max_op = IMGU_ABI_AWB_FR_MAX_OPERATIONS,
+ .max_tr = IMGU_ABI_AWB_FR_MAX_PROCESS_LINES,
+ .acc_enable = bi->info.isp.sp.enable.awb_fr_acc,
+ };
+
+ return ipu3_css_acc_process_lines(&pl, to->ops, to->process_lines_data,
+ NULL);
+}
+
+static int ipu3_css_awb_ops_calc(struct ipu3_css *css,
+ struct imgu_abi_awb_config *awb_config)
+{
+ struct imgu_abi_awb_intra_frame_operations_data *to =
+ &awb_config->operations_data;
+ struct imgu_fw_info *bi = &css->fwp->binary_header[css->current_binary];
+
+ struct process_lines pl = {
+ .image_height = css->rect[IPU3_CSS_RECT_BDS].height,
+ .grid_height = awb_config->config.grid.height,
+ .block_height =
+ 1 << awb_config->config.grid.block_height_log2,
+ .y_start = awb_config->config.grid.y_start,
+ .grid_height_per_slice =
+ awb_config->stripes[0].grid.height_per_slice,
+ .max_op = IMGU_ABI_AWB_MAX_OPERATIONS,
+ .max_tr = IMGU_ABI_AWB_MAX_TRANSFERS,
+ .acc_enable = bi->info.isp.sp.enable.awb_acc,
+ };
+
+ return ipu3_css_acc_process_lines(&pl, to->ops, to->process_lines_data,
+ to->transfer_data);
+}
+
+static u16 ipu3_css_grid_end(u16 start, u8 width, u8 block_width_log2)
+{
+ return (start & IPU3_UAPI_GRID_START_MASK) +
+ (width << block_width_log2) - 1;
+}
+
+static void ipu3_css_grid_end_calc(struct ipu3_uapi_grid_config *grid_cfg)
+{
+ grid_cfg->x_end = ipu3_css_grid_end(grid_cfg->x_start, grid_cfg->width,
+ grid_cfg->block_width_log2);
+ grid_cfg->y_end = ipu3_css_grid_end(grid_cfg->y_start, grid_cfg->height,
+ grid_cfg->block_height_log2);
+}
+
+/****************** config computation *****************************/
+
+static void ipu3_css_cfg_acc_stripe(struct ipu3_css *css,
+ struct imgu_abi_acc_param *acc)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ const unsigned int stripes = bi->info.isp.sp.iterator.num_stripes;
+ const unsigned int F = IPU3_UAPI_ISP_VEC_ELEMS * 2;
+ struct ipu3_css_scaler_info scaler_luma, scaler_chroma;
+ unsigned int bds_ds, i;
+
+ memset(acc, 0, sizeof(*acc));
+
+ /* acc_param: osys_config */
+
+ ipu3_css_osys_calc(css, stripes, &acc->osys, &scaler_luma,
+ &scaler_chroma, acc->stripe.block_stripes);
+
+ /* acc_param: stripe data */
+
+ /*
+ * For the striped case the approach is as follows:
+ * 1. down-scaled stripes are calculated - with 128 overlap
+ * (this is the main limiter therefore it's first)
+ * 2. input stripes are derived by up-scaling the down-scaled stripes
+ * (there are no alignment requirements on input stripes)
+ * 3. output stripes are derived from down-scaled stripes too
+ */
+
+ acc->stripe.num_of_stripes = stripes;
+ acc->stripe.input_frame.width =
+ css->queue[IPU3_CSS_QUEUE_IN].fmt.mpix.width;
+ acc->stripe.input_frame.height =
+ css->queue[IPU3_CSS_QUEUE_IN].fmt.mpix.height;
+ acc->stripe.input_frame.bayer_order =
+ css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order;
+
+ for (i = 0; i < stripes; i++)
+ acc->stripe.bds_out_stripes[i].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->stripe.bds_out_stripes[0].offset = 0;
+ if (stripes <= 1) {
+ acc->stripe.bds_out_stripes[0].width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, F);
+ } else {
+ /* Image processing is divided into two stripes */
+ acc->stripe.bds_out_stripes[0].width =
+ acc->stripe.bds_out_stripes[1].width =
+ (css->rect[IPU3_CSS_RECT_BDS].width / 2 & ~(F - 1)) + F;
+ /*
+ * Sum of width of the two stripes should not be smaller
+ * than output width and must be even times of overlapping
+ * unit f.
+ */
+ if ((css->rect[IPU3_CSS_RECT_BDS].width / F & 1) !=
+ !!(css->rect[IPU3_CSS_RECT_BDS].width & (F - 1)))
+ acc->stripe.bds_out_stripes[0].width += F;
+ if ((css->rect[IPU3_CSS_RECT_BDS].width / F & 1) &&
+ (css->rect[IPU3_CSS_RECT_BDS].width & (F - 1))) {
+ acc->stripe.bds_out_stripes[0].width += F;
+ acc->stripe.bds_out_stripes[1].width += F;
+ }
+ /* Overlap between stripes is IPU3_UAPI_ISP_VEC_ELEMS * 4 */
+ acc->stripe.bds_out_stripes[1].offset =
+ acc->stripe.bds_out_stripes[0].width - 2 * F;
+ }
+
+ acc->stripe.effective_stripes[0].height =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height;
+ acc->stripe.effective_stripes[0].offset = 0;
+ acc->stripe.bds_out_stripes_no_overlap[0].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->stripe.bds_out_stripes_no_overlap[0].offset = 0;
+ acc->stripe.output_stripes[0].height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ acc->stripe.output_stripes[0].offset = 0;
+ if (stripes <= 1) {
+ acc->stripe.down_scaled_stripes[0].width =
+ css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->stripe.down_scaled_stripes[0].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->stripe.down_scaled_stripes[0].offset = 0;
+
+ acc->stripe.effective_stripes[0].width =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].width;
+ acc->stripe.bds_out_stripes_no_overlap[0].width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, F);
+
+ acc->stripe.output_stripes[0].width =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ } else { /* Two stripes */
+ bds_ds = css->rect[IPU3_CSS_RECT_EFFECTIVE].width *
+ IMGU_BDS_GRANULARITY /
+ css->rect[IPU3_CSS_RECT_BDS].width;
+
+ acc->stripe.down_scaled_stripes[0] =
+ acc->stripe.bds_out_stripes[0];
+ acc->stripe.down_scaled_stripes[1] =
+ acc->stripe.bds_out_stripes[1];
+ if (!IS_ALIGNED(css->rect[IPU3_CSS_RECT_BDS].width, F))
+ acc->stripe.down_scaled_stripes[1].width += -F +
+ (css->rect[IPU3_CSS_RECT_BDS].width & (F - 1));
+
+ acc->stripe.effective_stripes[0].width = bds_ds *
+ acc->stripe.down_scaled_stripes[0].width /
+ IMGU_BDS_GRANULARITY;
+ acc->stripe.effective_stripes[1].width = bds_ds *
+ acc->stripe.down_scaled_stripes[1].width /
+ IMGU_BDS_GRANULARITY;
+ acc->stripe.effective_stripes[1].height =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height;
+ acc->stripe.effective_stripes[1].offset = bds_ds *
+ acc->stripe.down_scaled_stripes[1].offset /
+ IMGU_BDS_GRANULARITY;
+
+ acc->stripe.bds_out_stripes_no_overlap[0].width =
+ acc->stripe.bds_out_stripes_no_overlap[1].offset =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, 2 * F) / 2;
+ acc->stripe.bds_out_stripes_no_overlap[1].width =
+ DIV_ROUND_UP(css->rect[IPU3_CSS_RECT_BDS].width, F) /
+ 2 * F;
+ acc->stripe.bds_out_stripes_no_overlap[1].height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+
+ acc->stripe.output_stripes[0].width =
+ acc->stripe.down_scaled_stripes[0].width - F;
+ acc->stripe.output_stripes[1].width =
+ acc->stripe.down_scaled_stripes[1].width - F;
+ acc->stripe.output_stripes[1].height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ acc->stripe.output_stripes[1].offset =
+ acc->stripe.output_stripes[0].width;
+ }
+
+ acc->stripe.output_system_in_frame_width =
+ css->rect[IPU3_CSS_RECT_GDC].width;
+ acc->stripe.output_system_in_frame_height =
+ css->rect[IPU3_CSS_RECT_GDC].height;
+
+ acc->stripe.effective_frame_width =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].width;
+ acc->stripe.bds_frame_width = css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->stripe.out_frame_width =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.width;
+ acc->stripe.out_frame_height =
+ css->queue[IPU3_CSS_QUEUE_OUT].fmt.mpix.height;
+ acc->stripe.gdc_in_buffer_width =
+ css->aux_frames[IPU3_CSS_AUX_FRAME_REF].bytesperline /
+ css->aux_frames[IPU3_CSS_AUX_FRAME_REF].bytesperpixel;
+ acc->stripe.gdc_in_buffer_height =
+ css->aux_frames[IPU3_CSS_AUX_FRAME_REF].height;
+ acc->stripe.gdc_in_buffer_offset_x = IMGU_GDC_BUF_X;
+ acc->stripe.gdc_in_buffer_offset_y = IMGU_GDC_BUF_Y;
+ acc->stripe.display_frame_width =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.width;
+ acc->stripe.display_frame_height =
+ css->queue[IPU3_CSS_QUEUE_VF].fmt.mpix.height;
+ acc->stripe.bds_aligned_frame_width =
+ roundup(css->rect[IPU3_CSS_RECT_BDS].width,
+ 2 * IPU3_UAPI_ISP_VEC_ELEMS);
+
+ if (stripes > 1)
+ acc->stripe.half_overlap_vectors =
+ IMGU_STRIPE_FIXED_HALF_OVERLAP;
+ else
+ acc->stripe.half_overlap_vectors = 0;
+}
+
+static void ipu3_css_cfg_acc_dvs(struct ipu3_css *css,
+ struct imgu_abi_acc_param *acc)
+{
+ unsigned int i;
+
+ /* Disable DVS statistics */
+ acc->dvs_stat.operations_data.process_lines_data[0].lines =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->dvs_stat.operations_data.process_lines_data[0].cfg_set = 0;
+ acc->dvs_stat.operations_data.ops[0].op_type =
+ IMGU_ABI_ACC_OPTYPE_PROCESS_LINES;
+ acc->dvs_stat.operations_data.ops[0].op_indicator =
+ IMGU_ABI_ACC_OP_NO_OPS;
+ for (i = 0; i < IMGU_ABI_DVS_STAT_LEVELS; i++)
+ acc->dvs_stat.cfg.grd_config[i].enable = 0;
+}
+
+static void acc_bds_per_stripe_data(struct ipu3_css *css,
+ struct imgu_abi_acc_param *acc,
+ const int i)
+{
+ acc->bds.per_stripe.aligned_data[i].data.crop.hor_crop_en = 0;
+ acc->bds.per_stripe.aligned_data[i].data.crop.hor_crop_start = 0;
+ acc->bds.per_stripe.aligned_data[i].data.crop.hor_crop_end = 0;
+ acc->bds.per_stripe.aligned_data[i].data.hor_ctrl0 =
+ acc->bds.hor.hor_ctrl0;
+ acc->bds.per_stripe.aligned_data[i].data.hor_ctrl0.out_frame_width =
+ acc->stripe.down_scaled_stripes[i].width;
+ acc->bds.per_stripe.aligned_data[i].data.ver_ctrl1.out_frame_width =
+ acc->stripe.down_scaled_stripes[i].width;
+ acc->bds.per_stripe.aligned_data[i].data.ver_ctrl1.out_frame_height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+}
+
+/*
+ * Configure `acc' parameters. `acc_old' contains the old values (or is NULL)
+ * and `acc_user' contains new prospective values. `use' contains flags
+ * telling which fields to take from the old values (or generate if it is NULL)
+ * and which to take from the new user values.
+ */
+int ipu3_css_cfg_acc(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ struct imgu_abi_acc_param *acc,
+ struct imgu_abi_acc_param *acc_old,
+ struct ipu3_uapi_acc_param *acc_user)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ const unsigned int stripes = bi->info.isp.sp.iterator.num_stripes;
+ const unsigned int tnr_frame_width =
+ acc->stripe.bds_aligned_frame_width;
+ const unsigned int min_overlap = 10;
+ const struct v4l2_pix_format_mplane *pixm =
+ &css->queue[IPU3_CSS_QUEUE_IN].fmt.mpix;
+ const struct ipu3_css_bds_config *cfg_bds;
+ struct imgu_abi_input_feeder_data *feeder_data;
+
+ unsigned int bds_ds, ofs_x, ofs_y, i, width, height;
+ u8 b_w_log2; /* Block width log2 */
+
+ /* Update stripe using chroma and luma */
+
+ ipu3_css_cfg_acc_stripe(css, acc);
+
+ /* acc_param: input_feeder_config */
+
+ ofs_x = ((pixm->width -
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].width) >> 1) & ~1;
+ ofs_x += css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_RGGB ||
+ css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_GBRG ? 1 : 0;
+ ofs_y = ((pixm->height -
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height) >> 1) & ~1;
+ ofs_y += css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_BGGR ||
+ css->queue[IPU3_CSS_QUEUE_IN].css_fmt->bayer_order ==
+ IMGU_ABI_BAYER_ORDER_GBRG ? 1 : 0;
+ acc->input_feeder.data.row_stride = pixm->plane_fmt[0].bytesperline;
+ acc->input_feeder.data.start_row_address =
+ ofs_x / IMGU_PIXELS_PER_WORD * IMGU_BYTES_PER_WORD +
+ ofs_y * acc->input_feeder.data.row_stride;
+ acc->input_feeder.data.start_pixel = ofs_x % IMGU_PIXELS_PER_WORD;
+
+ acc->input_feeder.data_per_stripe.input_feeder_data[0].data =
+ acc->input_feeder.data;
+
+ ofs_x += acc->stripe.effective_stripes[1].offset;
+
+ feeder_data =
+ &acc->input_feeder.data_per_stripe.input_feeder_data[1].data;
+ feeder_data->row_stride = acc->input_feeder.data.row_stride;
+ feeder_data->start_row_address =
+ ofs_x / IMGU_PIXELS_PER_WORD * IMGU_BYTES_PER_WORD +
+ ofs_y * acc->input_feeder.data.row_stride;
+ feeder_data->start_pixel = ofs_x % IMGU_PIXELS_PER_WORD;
+
+ /* acc_param: bnr_static_config */
+
+ /*
+ * Originate from user or be the original default values if user has
+ * never set them before, when user gives a new set of parameters,
+ * for each chunk in the parameter structure there is a flag use->xxx
+ * whether to use the user-provided parameter or not. If not, the
+ * parameter remains unchanged in the driver:
+ * it's value is taken from acc_old.
+ */
+ if (use && use->acc_bnr) {
+ /* Take values from user */
+ acc->bnr = acc_user->bnr;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->bnr = acc_old->bnr;
+ } else {
+ /* Calculate from scratch */
+ acc->bnr = ipu3_css_bnr_defaults;
+ }
+
+ acc->bnr.column_size = tnr_frame_width;
+
+ /* acc_param: bnr_static_config_green_disparity */
+
+ if (use && use->acc_green_disparity) {
+ /* Take values from user */
+ acc->green_disparity = acc_user->green_disparity;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->green_disparity = acc_old->green_disparity;
+ } else {
+ /* Calculate from scratch */
+ memset(&acc->green_disparity, 0, sizeof(acc->green_disparity));
+ }
+
+ /* acc_param: dm_config */
+
+ if (use && use->acc_dm) {
+ /* Take values from user */
+ acc->dm = acc_user->dm;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->dm = acc_old->dm;
+ } else {
+ /* Calculate from scratch */
+ acc->dm = ipu3_css_dm_defaults;
+ }
+
+ acc->dm.frame_width = tnr_frame_width;
+
+ /* acc_param: ccm_mat_config */
+
+ if (use && use->acc_ccm) {
+ /* Take values from user */
+ acc->ccm = acc_user->ccm;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->ccm = acc_old->ccm;
+ } else {
+ /* Calculate from scratch */
+ acc->ccm = ipu3_css_ccm_defaults;
+ }
+
+ /* acc_param: gamma_config */
+
+ if (use && use->acc_gamma) {
+ /* Take values from user */
+ acc->gamma = acc_user->gamma;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->gamma = acc_old->gamma;
+ } else {
+ /* Calculate from scratch */
+ acc->gamma.gc_ctrl.enable = 1;
+ acc->gamma.gc_lut = ipu3_css_gamma_lut;
+ }
+
+ /* acc_param: csc_mat_config */
+
+ if (use && use->acc_csc) {
+ /* Take values from user */
+ acc->csc = acc_user->csc;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->csc = acc_old->csc;
+ } else {
+ /* Calculate from scratch */
+ acc->csc = ipu3_css_csc_defaults;
+ }
+
+ /* acc_param: cds_params */
+
+ if (use && use->acc_cds) {
+ /* Take values from user */
+ acc->cds = acc_user->cds;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->cds = acc_old->cds;
+ } else {
+ /* Calculate from scratch */
+ acc->cds = ipu3_css_cds_defaults;
+ }
+
+ /* acc_param: shd_config */
+
+ if (use && use->acc_shd) {
+ /* Take values from user */
+ acc->shd.shd = acc_user->shd.shd;
+ acc->shd.shd_lut = acc_user->shd.shd_lut;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->shd.shd = acc_old->shd.shd;
+ acc->shd.shd_lut = acc_old->shd.shd_lut;
+ } else {
+ /* Calculate from scratch */
+ acc->shd.shd = ipu3_css_shd_defaults;
+ memset(&acc->shd.shd_lut, 0, sizeof(acc->shd.shd_lut));
+ }
+
+ if (acc->shd.shd.grid.width <= 0)
+ return -EINVAL;
+
+ acc->shd.shd.grid.grid_height_per_slice =
+ IMGU_ABI_SHD_MAX_CELLS_PER_SET / acc->shd.shd.grid.width;
+
+ if (acc->shd.shd.grid.grid_height_per_slice <= 0)
+ return -EINVAL;
+
+ acc->shd.shd.general.init_set_vrt_offst_ul =
+ (-acc->shd.shd.grid.y_start >>
+ acc->shd.shd.grid.block_height_log2) %
+ acc->shd.shd.grid.grid_height_per_slice;
+
+ if (ipu3_css_shd_ops_calc(&acc->shd.shd_ops, &acc->shd.shd.grid,
+ css->rect[IPU3_CSS_RECT_BDS].height))
+ return -EINVAL;
+
+ /* acc_param: dvs_stat_config */
+ ipu3_css_cfg_acc_dvs(css, acc);
+
+ /* acc_param: yuvp1_iefd_config */
+
+ if (use && use->acc_iefd) {
+ /* Take values from user */
+ acc->iefd = acc_user->iefd;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->iefd = acc_old->iefd;
+ } else {
+ /* Calculate from scratch */
+ acc->iefd = ipu3_css_iefd_defaults;
+ }
+
+ /* acc_param: yuvp1_yds_config yds_c0 */
+
+ if (use && use->acc_yds_c0) {
+ /* Take values from user */
+ acc->yds_c0 = acc_user->yds_c0;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->yds_c0 = acc_old->yds_c0;
+ } else {
+ /* Calculate from scratch */
+ acc->yds_c0 = ipu3_css_yds_defaults;
+ }
+
+ /* acc_param: yuvp1_chnr_config chnr_c0 */
+
+ if (use && use->acc_chnr_c0) {
+ /* Take values from user */
+ acc->chnr_c0 = acc_user->chnr_c0;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->chnr_c0 = acc_old->chnr_c0;
+ } else {
+ /* Calculate from scratch */
+ acc->chnr_c0 = ipu3_css_chnr_defaults;
+ }
+
+ /* acc_param: yuvp1_y_ee_nr_config */
+
+ if (use && use->acc_y_ee_nr) {
+ /* Take values from user */
+ acc->y_ee_nr = acc_user->y_ee_nr;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->y_ee_nr = acc_old->y_ee_nr;
+ } else {
+ /* Calculate from scratch */
+ acc->y_ee_nr = ipu3_css_y_ee_nr_defaults;
+ }
+
+ /* acc_param: yuvp1_yds_config yds */
+
+ if (use && use->acc_yds) {
+ /* Take values from user */
+ acc->yds = acc_user->yds;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->yds = acc_old->yds;
+ } else {
+ /* Calculate from scratch */
+ acc->yds = ipu3_css_yds_defaults;
+ }
+
+ /* acc_param: yuvp1_chnr_config chnr */
+
+ if (use && use->acc_chnr) {
+ /* Take values from user */
+ acc->chnr = acc_user->chnr;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->chnr = acc_old->chnr;
+ } else {
+ /* Calculate from scratch */
+ acc->chnr = ipu3_css_chnr_defaults;
+ }
+
+ /* acc_param: yuvp2_y_tm_lut_static_config */
+
+ for (i = 0; i < IMGU_ABI_YUVP2_YTM_LUT_ENTRIES; i++)
+ acc->ytm.entries[i] = i * 32;
+ acc->ytm.enable = 0; /* Always disabled on IPU3 */
+
+ /* acc_param: yuvp1_yds_config yds2 */
+
+ if (use && use->acc_yds2) {
+ /* Take values from user */
+ acc->yds2 = acc_user->yds2;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->yds2 = acc_old->yds2;
+ } else {
+ /* Calculate from scratch */
+ acc->yds2 = ipu3_css_yds_defaults;
+ }
+
+ /* acc_param: yuvp2_tcc_static_config */
+
+ if (use && use->acc_tcc) {
+ /* Take values from user */
+ acc->tcc = acc_user->tcc;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->tcc = acc_old->tcc;
+ } else {
+ /* Calculate from scratch */
+ memset(&acc->tcc, 0, sizeof(acc->tcc));
+
+ acc->tcc.gen_control.en = 1;
+ acc->tcc.gen_control.blend_shift = 3;
+ acc->tcc.gen_control.gain_according_to_y_only = 1;
+ acc->tcc.gen_control.gamma = 8;
+ acc->tcc.gen_control.delta = 0;
+
+ for (i = 0; i < IPU3_UAPI_YUVP2_TCC_MACC_TABLE_ELEMENTS; i++) {
+ acc->tcc.macc_table.entries[i].a = 1024;
+ acc->tcc.macc_table.entries[i].b = 0;
+ acc->tcc.macc_table.entries[i].c = 0;
+ acc->tcc.macc_table.entries[i].d = 1024;
+ }
+
+ acc->tcc.inv_y_lut.entries[6] = 1023;
+ for (i = 7; i < IPU3_UAPI_YUVP2_TCC_INV_Y_LUT_ELEMENTS; i++)
+ acc->tcc.inv_y_lut.entries[i] = 1024 >> (i - 6);
+
+ acc->tcc.gain_pcwl = ipu3_css_tcc_gain_pcwl_lut;
+ acc->tcc.r_sqr_lut = ipu3_css_tcc_r_sqr_lut;
+ }
+
+ /* acc_param: dpc_config */
+
+ if (use && use->acc_dpc)
+ return -EINVAL; /* Not supported yet */
+
+ /* Just disable by default */
+ memset(&acc->dpc, 0, sizeof(acc->dpc));
+
+ /* acc_param: bds_config */
+
+ bds_ds = (css->rect[IPU3_CSS_RECT_EFFECTIVE].height *
+ IMGU_BDS_GRANULARITY) / css->rect[IPU3_CSS_RECT_BDS].height;
+ if (bds_ds < IMGU_BDS_MIN_SF_INV ||
+ bds_ds - IMGU_BDS_MIN_SF_INV >= ARRAY_SIZE(ipu3_css_bds_configs))
+ return -EINVAL;
+
+ cfg_bds = &ipu3_css_bds_configs[bds_ds - IMGU_BDS_MIN_SF_INV];
+ acc->bds.hor.hor_ctrl1.hor_crop_en = 0;
+ acc->bds.hor.hor_ctrl1.hor_crop_start = 0;
+ acc->bds.hor.hor_ctrl1.hor_crop_end = 0;
+ acc->bds.hor.hor_ctrl0.sample_patrn_length =
+ cfg_bds->sample_patrn_length;
+ acc->bds.hor.hor_ctrl0.hor_ds_en = cfg_bds->hor_ds_en;
+ acc->bds.hor.hor_ctrl0.min_clip_val = IMGU_BDS_MIN_CLIP_VAL;
+ acc->bds.hor.hor_ctrl0.max_clip_val = IMGU_BDS_MAX_CLIP_VAL;
+ acc->bds.hor.hor_ctrl0.out_frame_width =
+ css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->bds.hor.hor_ptrn_arr = cfg_bds->ptrn_arr;
+ acc->bds.hor.hor_phase_arr = cfg_bds->hor_phase_arr;
+ acc->bds.hor.hor_ctrl2.input_frame_height =
+ css->rect[IPU3_CSS_RECT_EFFECTIVE].height;
+ acc->bds.ver.ver_ctrl0.min_clip_val = IMGU_BDS_MIN_CLIP_VAL;
+ acc->bds.ver.ver_ctrl0.max_clip_val = IMGU_BDS_MAX_CLIP_VAL;
+ acc->bds.ver.ver_ctrl0.sample_patrn_length =
+ cfg_bds->sample_patrn_length;
+ acc->bds.ver.ver_ctrl0.ver_ds_en = cfg_bds->ver_ds_en;
+ acc->bds.ver.ver_ptrn_arr = cfg_bds->ptrn_arr;
+ acc->bds.ver.ver_phase_arr = cfg_bds->ver_phase_arr;
+ acc->bds.ver.ver_ctrl1.out_frame_width =
+ css->rect[IPU3_CSS_RECT_BDS].width;
+ acc->bds.ver.ver_ctrl1.out_frame_height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ for (i = 0; i < stripes; i++)
+ acc_bds_per_stripe_data(css, acc, i);
+
+ acc->bds.enabled = cfg_bds->hor_ds_en || cfg_bds->ver_ds_en;
+
+ /* acc_param: anr_config */
+
+ if (use && use->acc_anr) {
+ /* Take values from user */
+ acc->anr.transform = acc_user->anr.transform;
+ acc->anr.stitch.anr_stitch_en =
+ acc_user->anr.stitch.anr_stitch_en;
+ memcpy(acc->anr.stitch.pyramid, acc_user->anr.stitch.pyramid,
+ sizeof(acc->anr.stitch.pyramid));
+ } else if (acc_old) {
+ /* Use old value */
+ acc->anr.transform = acc_old->anr.transform;
+ acc->anr.stitch.anr_stitch_en =
+ acc_old->anr.stitch.anr_stitch_en;
+ memcpy(acc->anr.stitch.pyramid, acc_old->anr.stitch.pyramid,
+ sizeof(acc->anr.stitch.pyramid));
+ } else {
+ /* Calculate from scratch */
+ acc->anr = ipu3_css_anr_defaults;
+ }
+
+ /* Always enabled */
+ acc->anr.search.enable = 1;
+ acc->anr.transform.enable = 1;
+ acc->anr.tile2strm.enable = 1;
+ acc->anr.tile2strm.frame_width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, IMGU_ISP_VMEM_ALIGN);
+ acc->anr.search.frame_width = acc->anr.tile2strm.frame_width;
+ acc->anr.stitch.frame_width = acc->anr.tile2strm.frame_width;
+ acc->anr.tile2strm.frame_height = css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->anr.search.frame_height = acc->anr.tile2strm.frame_height;
+ acc->anr.stitch.frame_height = acc->anr.tile2strm.frame_height;
+
+ width = ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, IMGU_ISP_VMEM_ALIGN);
+ height = css->rect[IPU3_CSS_RECT_BDS].height;
+
+ if (acc->anr.transform.xreset + width > IPU3_UAPI_ANR_MAX_RESET)
+ acc->anr.transform.xreset = IPU3_UAPI_ANR_MAX_RESET - width;
+ if (acc->anr.transform.xreset < IPU3_UAPI_ANR_MIN_RESET)
+ acc->anr.transform.xreset = IPU3_UAPI_ANR_MIN_RESET;
+
+ if (acc->anr.transform.yreset + height > IPU3_UAPI_ANR_MAX_RESET)
+ acc->anr.transform.yreset = IPU3_UAPI_ANR_MAX_RESET - height;
+ if (acc->anr.transform.yreset < IPU3_UAPI_ANR_MIN_RESET)
+ acc->anr.transform.yreset = IPU3_UAPI_ANR_MIN_RESET;
+
+ /* acc_param: awb_fr_config */
+
+ if (use && use->acc_awb_fr) {
+ /* Take values from user */
+ acc->awb_fr.config = acc_user->awb_fr.config;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->awb_fr.config = acc_old->awb_fr.config;
+ } else {
+ /* Set from scratch */
+ acc->awb_fr.config = ipu3_css_awb_fr_defaults;
+ }
+
+ ipu3_css_grid_end_calc(&acc->awb_fr.config.grid_cfg);
+
+ if (acc->awb_fr.config.grid_cfg.width <= 0)
+ return -EINVAL;
+
+ acc->awb_fr.config.grid_cfg.height_per_slice =
+ IMGU_ABI_AWB_FR_MAX_CELLS_PER_SET /
+ acc->awb_fr.config.grid_cfg.width;
+
+ for (i = 0; i < stripes; i++)
+ acc->awb_fr.stripes[i] = acc->awb_fr.config;
+
+ if (acc->awb_fr.config.grid_cfg.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset + min_overlap) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->awb_fr.stripes[0].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else if (acc->awb_fr.config.grid_cfg.x_end <=
+ acc->stripe.bds_out_stripes[0].width - min_overlap) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->awb_fr.stripes[1].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else {
+ /* Enable for both stripes */
+ u16 end; /* width for grid end */
+
+ acc->awb_fr.stripes[0].grid_cfg.width =
+ (acc->stripe.bds_out_stripes[0].width - min_overlap -
+ acc->awb_fr.config.grid_cfg.x_start + 1) >>
+ acc->awb_fr.config.grid_cfg.block_width_log2;
+ acc->awb_fr.stripes[1].grid_cfg.width =
+ acc->awb_fr.config.grid_cfg.width -
+ acc->awb_fr.stripes[0].grid_cfg.width;
+
+ b_w_log2 = acc->awb_fr.stripes[0].grid_cfg.block_width_log2;
+ end = ipu3_css_grid_end(acc->awb_fr.stripes[0].grid_cfg.x_start,
+ acc->awb_fr.stripes[0].grid_cfg.width,
+ b_w_log2);
+ acc->awb_fr.stripes[0].grid_cfg.x_end = end;
+
+ acc->awb_fr.stripes[1].grid_cfg.x_start =
+ (acc->awb_fr.stripes[0].grid_cfg.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+ b_w_log2 = acc->awb_fr.stripes[1].grid_cfg.block_width_log2;
+ end = ipu3_css_grid_end(acc->awb_fr.stripes[1].grid_cfg.x_start,
+ acc->awb_fr.stripes[1].grid_cfg.width,
+ b_w_log2);
+ acc->awb_fr.stripes[1].grid_cfg.x_end = end;
+
+ /*
+ * To reduce complexity of debubbling and loading
+ * statistics fix grid_height_per_slice to 1 for both
+ * stripes.
+ */
+ for (i = 0; i < stripes; i++)
+ acc->awb_fr.stripes[i].grid_cfg.height_per_slice = 1;
+ }
+
+ if (ipu3_css_awb_fr_ops_calc(css, &acc->awb_fr))
+ return -EINVAL;
+
+ /* acc_param: ae_config */
+
+ if (use && use->acc_ae) {
+ /* Take values from user */
+ acc->ae.grid_cfg = acc_user->ae.grid_cfg;
+ acc->ae.ae_ccm = acc_user->ae.ae_ccm;
+ for (i = 0; i < IPU3_UAPI_AE_WEIGHTS; i++)
+ acc->ae.weights[i] = acc_user->ae.weights[i];
+ } else if (acc_old) {
+ /* Use old value */
+ acc->ae.grid_cfg = acc_old->ae.grid_cfg;
+ acc->ae.ae_ccm = acc_old->ae.ae_ccm;
+ for (i = 0; i < IPU3_UAPI_AE_WEIGHTS; i++)
+ acc->ae.weights[i] = acc_old->ae.weights[i];
+ } else {
+ /* Set from scratch */
+ static const struct ipu3_uapi_ae_weight_elem
+ weight_def = { 1, 1, 1, 1, 1, 1, 1, 1 };
+
+ acc->ae.grid_cfg = ipu3_css_ae_grid_defaults;
+ acc->ae.ae_ccm = ipu3_css_ae_ccm_defaults;
+ for (i = 0; i < IPU3_UAPI_AE_WEIGHTS; i++)
+ acc->ae.weights[i] = weight_def;
+ }
+
+ b_w_log2 = acc->ae.grid_cfg.block_width_log2;
+ acc->ae.grid_cfg.x_end = ipu3_css_grid_end(acc->ae.grid_cfg.x_start,
+ acc->ae.grid_cfg.width,
+ b_w_log2);
+ b_w_log2 = acc->ae.grid_cfg.block_height_log2;
+ acc->ae.grid_cfg.y_end = ipu3_css_grid_end(acc->ae.grid_cfg.y_start,
+ acc->ae.grid_cfg.height,
+ b_w_log2);
+
+ for (i = 0; i < stripes; i++)
+ acc->ae.stripes[i].grid = acc->ae.grid_cfg;
+
+ if (acc->ae.grid_cfg.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->ae.stripes[0].grid.ae_en = 0;
+ } else if (acc->ae.grid_cfg.x_end <=
+ acc->stripe.bds_out_stripes[0].width) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->ae.stripes[1].grid.ae_en = 0;
+ } else {
+ /* Enable for both stripes */
+ u8 b_w_log2;
+
+ acc->ae.stripes[0].grid.width =
+ (acc->stripe.bds_out_stripes[0].width -
+ acc->ae.grid_cfg.x_start + 1) >>
+ acc->ae.grid_cfg.block_width_log2;
+
+ acc->ae.stripes[1].grid.width =
+ acc->ae.grid_cfg.width - acc->ae.stripes[0].grid.width;
+
+ b_w_log2 = acc->ae.stripes[0].grid.block_width_log2;
+ acc->ae.stripes[0].grid.x_end =
+ ipu3_css_grid_end(acc->ae.stripes[0].grid.x_start,
+ acc->ae.stripes[0].grid.width,
+ b_w_log2);
+
+ acc->ae.stripes[1].grid.x_start =
+ (acc->ae.stripes[0].grid.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+ b_w_log2 = acc->ae.stripes[1].grid.block_width_log2;
+ acc->ae.stripes[1].grid.x_end =
+ ipu3_css_grid_end(acc->ae.stripes[1].grid.x_start,
+ acc->ae.stripes[1].grid.width,
+ b_w_log2);
+ }
+
+ /* acc_param: af_config */
+
+ if (use && use->acc_af) {
+ /* Take values from user */
+ acc->af.config.filter_config =
+ acc_user->af.config.filter_config;
+ acc->af.config.grid_cfg = acc_user->af.config.grid_cfg;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->af.config = acc_old->af.config;
+ } else {
+ /* Set from scratch */
+ acc->af.config.filter_config =
+ ipu3_css_af_defaults.filter_config;
+ acc->af.config.grid_cfg = ipu3_css_af_defaults.grid_cfg;
+ }
+
+ ipu3_css_grid_end_calc(&acc->af.config.grid_cfg);
+
+ if (acc->af.config.grid_cfg.width <= 0)
+ return -EINVAL;
+
+ acc->af.config.grid_cfg.height_per_slice =
+ IMGU_ABI_AF_MAX_CELLS_PER_SET / acc->af.config.grid_cfg.width;
+ acc->af.config.frame_size.width =
+ ALIGN(css->rect[IPU3_CSS_RECT_BDS].width, IMGU_ISP_VMEM_ALIGN);
+ acc->af.config.frame_size.height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+
+ if (acc->stripe.bds_out_stripes[0].width <= min_overlap)
+ return -EINVAL;
+
+ for (i = 0; i < stripes; i++) {
+ acc->af.stripes[i].grid_cfg = acc->af.config.grid_cfg;
+ acc->af.stripes[i].frame_size.height =
+ css->rect[IPU3_CSS_RECT_BDS].height;
+ acc->af.stripes[i].frame_size.width =
+ acc->stripe.bds_out_stripes[i].width;
+ }
+
+ if (acc->af.config.grid_cfg.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset + min_overlap) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->af.stripes[0].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else if (acc->af.config.grid_cfg.x_end <=
+ acc->stripe.bds_out_stripes[0].width - min_overlap) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->af.stripes[1].grid_cfg.y_start &=
+ ~IPU3_UAPI_GRID_Y_START_EN;
+ } else {
+ /* Enable for both stripes */
+
+ acc->af.stripes[0].grid_cfg.width =
+ (acc->stripe.bds_out_stripes[0].width - min_overlap -
+ acc->af.config.grid_cfg.x_start + 1) >>
+ acc->af.config.grid_cfg.block_width_log2;
+ acc->af.stripes[1].grid_cfg.width =
+ acc->af.config.grid_cfg.width -
+ acc->af.stripes[0].grid_cfg.width;
+
+ b_w_log2 = acc->af.stripes[0].grid_cfg.block_width_log2;
+ acc->af.stripes[0].grid_cfg.x_end =
+ ipu3_css_grid_end(acc->af.stripes[0].grid_cfg.x_start,
+ acc->af.stripes[0].grid_cfg.width,
+ b_w_log2);
+
+ acc->af.stripes[1].grid_cfg.x_start =
+ (acc->af.stripes[0].grid_cfg.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+
+ b_w_log2 = acc->af.stripes[1].grid_cfg.block_width_log2;
+ acc->af.stripes[1].grid_cfg.x_end =
+ ipu3_css_grid_end(acc->af.stripes[1].grid_cfg.x_start,
+ acc->af.stripes[1].grid_cfg.width,
+ b_w_log2);
+
+ /*
+ * To reduce complexity of debubbling and loading statistics
+ * fix grid_height_per_slice to 1 for both stripes
+ */
+ for (i = 0; i < stripes; i++)
+ acc->af.stripes[i].grid_cfg.height_per_slice = 1;
+ }
+
+ if (ipu3_css_af_ops_calc(css, &acc->af))
+ return -EINVAL;
+
+ /* acc_param: awb_config */
+
+ if (use && use->acc_awb) {
+ /* Take values from user */
+ acc->awb.config = acc_user->awb.config;
+ } else if (acc_old) {
+ /* Use old value */
+ acc->awb.config = acc_old->awb.config;
+ } else {
+ /* Set from scratch */
+ acc->awb.config = ipu3_css_awb_defaults;
+ }
+
+ if (acc->awb.config.grid.width <= 0)
+ return -EINVAL;
+
+ acc->awb.config.grid.height_per_slice =
+ IMGU_ABI_AWB_MAX_CELLS_PER_SET / acc->awb.config.grid.width,
+ ipu3_css_grid_end_calc(&acc->awb.config.grid);
+
+ for (i = 0; i < stripes; i++)
+ acc->awb.stripes[i] = acc->awb.config;
+
+ if (acc->awb.config.grid.x_start >=
+ acc->stripe.down_scaled_stripes[1].offset + min_overlap) {
+ /* Enable only for rightmost stripe, disable left */
+ acc->awb.stripes[0].rgbs_thr_b &= ~IPU3_UAPI_AWB_RGBS_THR_B_EN;
+ } else if (acc->awb.config.grid.x_end <=
+ acc->stripe.bds_out_stripes[0].width - min_overlap) {
+ /* Enable only for leftmost stripe, disable right */
+ acc->awb.stripes[1].rgbs_thr_b &= ~IPU3_UAPI_AWB_RGBS_THR_B_EN;
+ } else {
+ /* Enable for both stripes */
+
+ acc->awb.stripes[0].grid.width =
+ (acc->stripe.bds_out_stripes[0].width -
+ acc->awb.config.grid.x_start + 1) >>
+ acc->awb.config.grid.block_width_log2;
+ acc->awb.stripes[1].grid.width = acc->awb.config.grid.width -
+ acc->awb.stripes[0].grid.width;
+
+ b_w_log2 = acc->awb.stripes[0].grid.block_width_log2;
+ acc->awb.stripes[0].grid.x_end =
+ ipu3_css_grid_end(acc->awb.stripes[0].grid.x_start,
+ acc->awb.stripes[0].grid.width,
+ b_w_log2);
+
+ acc->awb.stripes[1].grid.x_start =
+ (acc->awb.stripes[0].grid.x_end + 1 -
+ acc->stripe.down_scaled_stripes[1].offset) &
+ IPU3_UAPI_GRID_START_MASK;
+
+ b_w_log2 = acc->awb.stripes[1].grid.block_width_log2;
+ acc->awb.stripes[1].grid.x_end =
+ ipu3_css_grid_end(acc->awb.stripes[1].grid.x_start,
+ acc->awb.stripes[1].grid.width,
+ b_w_log2);
+
+ /*
+ * To reduce complexity of debubbling and loading statistics
+ * fix grid_height_per_slice to 1 for both stripes
+ */
+ for (i = 0; i < stripes; i++)
+ acc->awb.stripes[i].grid.height_per_slice = 1;
+ }
+
+ if (ipu3_css_awb_ops_calc(css, &acc->awb))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Fill the indicated structure in `new_binary_params' from the possible
+ * sources based on `use_user' flag: if the flag is false, copy from
+ * `old_binary_params', or if the flag is true, copy from `user_setting'
+ * and return NULL (or error pointer on error).
+ * If the flag is false and `old_binary_params' is NULL, return pointer
+ * to the structure inside `new_binary_params'. In that case the caller
+ * should calculate and fill the structure from scratch.
+ */
+static void *ipu3_css_cfg_copy(struct ipu3_css *css, bool use_user,
+ void *user_setting, void *old_binary_params,
+ void *new_binary_params,
+ enum imgu_abi_memories m,
+ struct imgu_fw_isp_parameter *par,
+ size_t par_size)
+{
+ const enum imgu_abi_param_class c = IMGU_ABI_PARAM_CLASS_PARAM;
+ void *new_setting, *old_setting;
+
+ new_setting = ipu3_css_fw_pipeline_params(css, c, m, par, par_size,
+ new_binary_params);
+ if (!new_setting)
+ return ERR_PTR(-EPROTO); /* Corrupted firmware */
+
+ if (use_user) {
+ /* Take new user parameters */
+ memcpy(new_setting, user_setting, par_size);
+ } else if (old_binary_params) {
+ /* Take previous value */
+ old_setting = ipu3_css_fw_pipeline_params(css, c, m, par,
+ par_size,
+ old_binary_params);
+ if (!old_setting)
+ return ERR_PTR(-EPROTO);
+ memcpy(new_setting, old_setting, par_size);
+ } else {
+ return new_setting; /* Need to calculate */
+ }
+
+ return NULL; /* Copied from other value */
+}
+
+/*
+ * Configure VMEM0 parameters (late binding parameters).
+ */
+int ipu3_css_cfg_vmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *vmem0, void *vmem0_old,
+ struct ipu3_uapi_params *user)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ struct imgu_fw_param_memory_offsets *pofs = (void *)css->fwp +
+ bi->blob.memory_offsets.offsets[IMGU_ABI_PARAM_CLASS_PARAM];
+ struct ipu3_uapi_isp_lin_vmem_params *lin_vmem = NULL;
+ struct ipu3_uapi_isp_tnr3_vmem_params *tnr_vmem = NULL;
+ struct ipu3_uapi_isp_xnr3_vmem_params *xnr_vmem = NULL;
+ const enum imgu_abi_param_class c = IMGU_ABI_PARAM_CLASS_PARAM;
+ const enum imgu_abi_memories m = IMGU_ABI_MEM_ISP_VMEM0;
+ unsigned int i;
+
+ /* Configure VMEM0 */
+
+ memset(vmem0, 0, bi->info.isp.sp.mem_initializers.params[c][m].size);
+
+ /* Configure Linearization VMEM0 parameters */
+
+ lin_vmem = ipu3_css_cfg_copy(css, use && use->lin_vmem_params,
+ &user->lin_vmem_params, vmem0_old, vmem0,
+ m, &pofs->vmem.lin, sizeof(*lin_vmem));
+ if (!IS_ERR_OR_NULL(lin_vmem)) {
+ /* Generate parameter from scratch */
+ for (i = 0; i < IPU3_UAPI_LIN_LUT_SIZE; i++) {
+ lin_vmem->lin_lutlow_gr[i] = 32 * i;
+ lin_vmem->lin_lutlow_r[i] = 32 * i;
+ lin_vmem->lin_lutlow_b[i] = 32 * i;
+ lin_vmem->lin_lutlow_gb[i] = 32 * i;
+
+ lin_vmem->lin_lutdif_gr[i] = 32;
+ lin_vmem->lin_lutdif_r[i] = 32;
+ lin_vmem->lin_lutdif_b[i] = 32;
+ lin_vmem->lin_lutdif_gb[i] = 32;
+ }
+ }
+
+ /* Configure TNR3 VMEM parameters */
+ if (css->pipe_id == IPU3_CSS_PIPE_ID_VIDEO) {
+ tnr_vmem = ipu3_css_cfg_copy(css, use && use->tnr3_vmem_params,
+ &user->tnr3_vmem_params,
+ vmem0_old, vmem0, m,
+ &pofs->vmem.tnr3,
+ sizeof(*tnr_vmem));
+ if (!IS_ERR_OR_NULL(tnr_vmem)) {
+ /* Generate parameter from scratch */
+ for (i = 0; i < IPU3_UAPI_ISP_TNR3_VMEM_LEN; i++)
+ tnr_vmem->sigma[i] = 256;
+ }
+ }
+ i = IPU3_UAPI_ISP_TNR3_VMEM_LEN;
+
+ /* Configure XNR3 VMEM parameters */
+
+ xnr_vmem = ipu3_css_cfg_copy(css, use && use->xnr3_vmem_params,
+ &user->xnr3_vmem_params, vmem0_old, vmem0,
+ m, &pofs->vmem.xnr3, sizeof(*xnr_vmem));
+ if (!IS_ERR_OR_NULL(xnr_vmem)) {
+ xnr_vmem->x[i] = ipu3_css_xnr3_vmem_defaults.x
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ xnr_vmem->a[i] = ipu3_css_xnr3_vmem_defaults.a
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ xnr_vmem->b[i] = ipu3_css_xnr3_vmem_defaults.b
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ xnr_vmem->c[i] = ipu3_css_xnr3_vmem_defaults.c
+ [i % IMGU_XNR3_VMEM_LUT_LEN];
+ }
+
+ return IS_ERR(lin_vmem) || IS_ERR(tnr_vmem) || IS_ERR(xnr_vmem) ?
+ -EPROTO : 0;
+}
+
+/*
+ * Configure DMEM0 parameters (late binding parameters).
+ */
+int ipu3_css_cfg_dmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *dmem0, void *dmem0_old,
+ struct ipu3_uapi_params *user)
+{
+ const struct imgu_fw_info *bi =
+ &css->fwp->binary_header[css->current_binary];
+ struct imgu_fw_param_memory_offsets *pofs = (void *)css->fwp +
+ bi->blob.memory_offsets.offsets[IMGU_ABI_PARAM_CLASS_PARAM];
+
+ struct ipu3_uapi_isp_tnr3_params *tnr_dmem = NULL;
+ struct ipu3_uapi_isp_xnr3_params *xnr_dmem;
+
+ const enum imgu_abi_param_class c = IMGU_ABI_PARAM_CLASS_PARAM;
+ const enum imgu_abi_memories m = IMGU_ABI_MEM_ISP_DMEM0;
+
+ /* Configure DMEM0 */
+
+ memset(dmem0, 0, bi->info.isp.sp.mem_initializers.params[c][m].size);
+
+ /* Configure TNR3 DMEM0 parameters */
+ if (css->pipe_id == IPU3_CSS_PIPE_ID_VIDEO) {
+ tnr_dmem = ipu3_css_cfg_copy(css, use && use->tnr3_dmem_params,
+ &user->tnr3_dmem_params, dmem0_old,
+ dmem0, m, &pofs->dmem.tnr3,
+ sizeof(*tnr_dmem));
+ if (!IS_ERR_OR_NULL(tnr_dmem)) {
+ /* Generate parameter from scratch */
+ tnr_dmem->knee_y1 = 768;
+ tnr_dmem->knee_y2 = 1280;
+ }
+ }
+
+ /* Configure XNR3 DMEM0 parameters */
+
+ xnr_dmem = ipu3_css_cfg_copy(css, use && use->xnr3_dmem_params,
+ &user->xnr3_dmem_params, dmem0_old, dmem0,
+ m, &pofs->dmem.xnr3, sizeof(*xnr_dmem));
+ if (!IS_ERR_OR_NULL(xnr_dmem)) {
+ /* Generate parameter from scratch */
+ xnr_dmem->alpha.y0 = 2047;
+ xnr_dmem->alpha.u0 = 2047;
+ xnr_dmem->alpha.v0 = 2047;
+ }
+
+ return IS_ERR(tnr_dmem) || IS_ERR(xnr_dmem) ? -EPROTO : 0;
+}
+
+/* Generate unity morphing table without morphing effect */
+void ipu3_css_cfg_gdc_table(struct imgu_abi_gdc_warp_param *gdc,
+ int frame_in_x, int frame_in_y,
+ int frame_out_x, int frame_out_y,
+ int env_w, int env_h)
+{
+ static const unsigned int FRAC_BITS = IMGU_ABI_GDC_FRAC_BITS;
+ static const unsigned int XMEM_ALIGN = 1 << 4;
+ const unsigned int XMEM_ALIGN_MASK = ~(XMEM_ALIGN - 1);
+ static const unsigned int BCI_ENV = 4;
+ static const unsigned int BYP = 2; /* Bytes per pixel */
+ const unsigned int OFFSET_X = 2 * IMGU_DVS_BLOCK_W + env_w + 1;
+ const unsigned int OFFSET_Y = IMGU_DVS_BLOCK_H + env_h + 1;
+
+ struct imgu_abi_gdc_warp_param gdc_luma, gdc_chroma;
+
+ unsigned int blocks_x = ALIGN(DIV_ROUND_UP(frame_out_x,
+ IMGU_DVS_BLOCK_W), 2);
+ unsigned int blocks_y = DIV_ROUND_UP(frame_out_y, IMGU_DVS_BLOCK_H);
+ unsigned int y0, x0, x1, x, y;
+
+ /* Global luma settings */
+ gdc_luma.origin_x = 0;
+ gdc_luma.origin_y = 0;
+ gdc_luma.p0_x = (OFFSET_X - (OFFSET_X & XMEM_ALIGN_MASK)) << FRAC_BITS;
+ gdc_luma.p0_y = 0;
+ gdc_luma.p1_x = gdc_luma.p0_x + (IMGU_DVS_BLOCK_W << FRAC_BITS);
+ gdc_luma.p1_y = gdc_luma.p0_y;
+ gdc_luma.p2_x = gdc_luma.p0_x;
+ gdc_luma.p2_y = gdc_luma.p0_y + (IMGU_DVS_BLOCK_H << FRAC_BITS);
+ gdc_luma.p3_x = gdc_luma.p1_x;
+ gdc_luma.p3_y = gdc_luma.p2_y;
+
+ gdc_luma.in_block_width = IMGU_DVS_BLOCK_W + BCI_ENV +
+ OFFSET_X - (OFFSET_X & XMEM_ALIGN_MASK);
+ gdc_luma.in_block_width_a = DIV_ROUND_UP(gdc_luma.in_block_width,
+ IPU3_UAPI_ISP_VEC_ELEMS);
+ gdc_luma.in_block_width_b = DIV_ROUND_UP(gdc_luma.in_block_width,
+ IMGU_ABI_ISP_DDR_WORD_BYTES /
+ BYP);
+ gdc_luma.in_block_height = IMGU_DVS_BLOCK_H + BCI_ENV;
+ gdc_luma.padding = 0;
+
+ /* Global chroma settings */
+ gdc_chroma.origin_x = 0;
+ gdc_chroma.origin_y = 0;
+ gdc_chroma.p0_x = (OFFSET_X / 2 - (OFFSET_X / 2 & XMEM_ALIGN_MASK)) <<
+ FRAC_BITS;
+ gdc_chroma.p0_y = 0;
+ gdc_chroma.p1_x = gdc_chroma.p0_x + (IMGU_DVS_BLOCK_W << FRAC_BITS);
+ gdc_chroma.p1_y = gdc_chroma.p0_y;
+ gdc_chroma.p2_x = gdc_chroma.p0_x;
+ gdc_chroma.p2_y = gdc_chroma.p0_y + (IMGU_DVS_BLOCK_H / 2 << FRAC_BITS);
+ gdc_chroma.p3_x = gdc_chroma.p1_x;
+ gdc_chroma.p3_y = gdc_chroma.p2_y;
+
+ gdc_chroma.in_block_width = IMGU_DVS_BLOCK_W + BCI_ENV;
+ gdc_chroma.in_block_width_a = DIV_ROUND_UP(gdc_chroma.in_block_width,
+ IPU3_UAPI_ISP_VEC_ELEMS);
+ gdc_chroma.in_block_width_b = DIV_ROUND_UP(gdc_chroma.in_block_width,
+ IMGU_ABI_ISP_DDR_WORD_BYTES /
+ BYP);
+ gdc_chroma.in_block_height = IMGU_DVS_BLOCK_H / 2 + BCI_ENV;
+ gdc_chroma.padding = 0;
+
+ /* Calculate block offsets for luma and chroma */
+ for (y0 = 0; y0 < blocks_y; y0++) {
+ for (x0 = 0; x0 < blocks_x / 2; x0++) {
+ for (x1 = 0; x1 < 2; x1++) {
+ /* Luma blocks */
+ x = (x0 * 2 + x1) * IMGU_DVS_BLOCK_W + OFFSET_X;
+ x &= XMEM_ALIGN_MASK;
+ y = y0 * IMGU_DVS_BLOCK_H + OFFSET_Y;
+ *gdc = gdc_luma;
+ gdc->in_addr_offset =
+ (y * frame_in_x + x) * BYP;
+ gdc++;
+ }
+
+ /* Chroma block */
+ x = x0 * IMGU_DVS_BLOCK_W + OFFSET_X / 2;
+ x &= XMEM_ALIGN_MASK;
+ y = y0 * (IMGU_DVS_BLOCK_H / 2) + OFFSET_Y / 2;
+ *gdc = gdc_chroma;
+ gdc->in_addr_offset = (y * frame_in_x + x) * BYP;
+ gdc++;
+ }
+ }
+}
new file mode 100644
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2018 Intel Corporation */
+
+#ifndef __IPU3_PARAMS_H
+#define __IPU3_PARAMS_H
+
+int ipu3_css_cfg_acc(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ struct imgu_abi_acc_param *acc,
+ struct imgu_abi_acc_param *acc_old,
+ struct ipu3_uapi_acc_param *acc_user);
+
+int ipu3_css_cfg_vmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *vmem0, void *vmem0_old,
+ struct ipu3_uapi_params *user);
+
+int ipu3_css_cfg_dmem0(struct ipu3_css *css, struct ipu3_uapi_flags *use,
+ void *dmem0, void *dmem0_old,
+ struct ipu3_uapi_params *user);
+
+void ipu3_css_cfg_gdc_table(struct imgu_abi_gdc_warp_param *gdc,
+ int frame_in_x, int frame_in_y,
+ int frame_out_x, int frame_out_y,
+ int env_w, int env_h);
+
+#endif /*__IPU3_PARAMS_H */
A collection of routines that are mainly used to calculate the parameters for accelerator cluster. Signed-off-by: Yong Zhi <yong.zhi@intel.com> --- drivers/media/pci/intel/ipu3/ipu3-css-params.c | 2907 ++++++++++++++++++++++++ drivers/media/pci/intel/ipu3/ipu3-css-params.h | 25 + 2 files changed, 2932 insertions(+) create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-params.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-params.h