arm64: dts: nxp: ls208xa: add more thermal zone support
diff mbox series

Message ID 20181031044742.26327-1-andy.tang@nxp.com
State New
Headers show
Series
  • arm64: dts: nxp: ls208xa: add more thermal zone support
Related show

Commit Message

Yuantian Tang Oct. 31, 2018, 4:47 a.m. UTC
Ls208xa has several thermal sensors. Add all the sensor id to dts
to enable them.

To make the dts cleaner, re-organize the nodes to split out the
common part so that it can be shared with other SoCs.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi  |    8 +-
 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi  |    8 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi  |   83 +++-----
 arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi |   99 +++++++++
 arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi |   99 +++++++++
 arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi |   99 +++++++++
 arch/arm64/boot/dts/freescale/fsl-tmu.dtsi      |  251 +++++++++++++++++++++++
 7 files changed, 591 insertions(+), 56 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu.dtsi

Comments

Yuantian Tang Dec. 18, 2018, 7:01 a.m. UTC | #1
Hi,

PING.

BR,
Andy

> -----Original Message-----
> From: Yuantian Tang <andy.tang@nxp.com>
> Sent: 2018年10月31日 12:48
> To: shawnguo@kernel.org
> Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org; mark.rutland@arm.com;
> linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; rui.zhang@intel.com; daniel.lezcano@linaro.org;
> Andy Tang <andy.tang@nxp.com>
> Subject: [PATCH] arm64: dts: nxp: ls208xa: add more thermal zone support
> 
> Ls208xa has several thermal sensors. Add all the sensor id to dts to enable
> them.
> 
> To make the dts cleaner, re-organize the nodes to split out the common part so
> that it can be shared with other SoCs.
> 
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi  |    8 +-
>  arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi  |    8 +-
>  arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi  |   83 +++-----
>  arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi |   99 +++++++++
>  arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi |   99 +++++++++
>  arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi |   99 +++++++++
>  arch/arm64/boot/dts/freescale/fsl-tmu.dtsi      |  251
> +++++++++++++++++++++++
>  7 files changed, 591 insertions(+), 56 deletions(-)  create mode 100644
> arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index f9c1d30..8f9788c 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -12,7 +12,7 @@
>  #include "fsl-ls208xa.dtsi"
> 
>  &cpu {
> -	cpu0: cpu@0 {
> +	cooling_map0: cpu0: cpu@0 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a57";
>  		reg = <0x0>;
> @@ -32,7 +32,7 @@
>  		#cooling-cells = <2>;
>  	};
> 
> -	cpu2: cpu@100 {
> +	cooling_map1: cpu2: cpu@100 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a57";
>  		reg = <0x100>;
> @@ -52,7 +52,7 @@
>  		#cooling-cells = <2>;
>  	};
> 
> -	cpu4: cpu@200 {
> +	cooling_map2: cpu4: cpu@200 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a57";
>  		reg = <0x200>;
> @@ -72,7 +72,7 @@
>  		#cooling-cells = <2>;
>  	};
> 
> -	cpu6: cpu@300 {
> +	cooling_map3: cpu6: cpu@300 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a57";
>  		reg = <0x300>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> index 7c882da..013fe16 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> @@ -12,7 +12,7 @@
>  #include "fsl-ls208xa.dtsi"
> 
>  &cpu {
> -	cpu0: cpu@0 {
> +	cooling_map0: cpu0: cpu@0 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a72";
>  		reg = <0x0>;
> @@ -32,7 +32,7 @@
>  		#cooling-cells = <2>;
>  	};
> 
> -	cpu2: cpu@100 {
> +	cooling_map1: cpu2: cpu@100 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a72";
>  		reg = <0x100>;
> @@ -52,7 +52,7 @@
>  		#cooling-cells = <2>;
>  	};
> 
> -	cpu4: cpu@200 {
> +	cooling_map2: cpu4: cpu@200 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a72";
>  		reg = <0x200>;
> @@ -72,7 +72,7 @@
>  		#cooling-cells = <2>;
>  	};
> 
> -	cpu6: cpu@300 {
> +	cooling_map3: cpu6: cpu@300 {
>  		device_type = "cpu";
>  		compatible = "arm,cortex-a72";
>  		reg = <0x300>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index 8cb78dd..4102317 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -75,54 +75,7 @@
>  		mask = <0x2>;
>  	};
> 
> -	thermal-zones {
> -		cpu_thermal: cpu-thermal {
> -			polling-delay-passive = <1000>;
> -			polling-delay = <5000>;
> -
> -			thermal-sensors = <&tmu 4>;
> -
> -			trips {
> -				cpu_alert: cpu-alert {
> -					temperature = <75000>;
> -					hysteresis = <2000>;
> -					type = "passive";
> -				};
> -				cpu_crit: cpu-crit {
> -					temperature = <85000>;
> -					hysteresis = <2000>;
> -					type = "critical";
> -				};
> -			};
> -
> -			cooling-maps {
> -				map0 {
> -					trip = <&cpu_alert>;
> -					cooling-device =
> -						<&cpu0 THERMAL_NO_LIMIT
> -						THERMAL_NO_LIMIT>;
> -				};
> -				map1 {
> -					trip = <&cpu_alert>;
> -					cooling-device =
> -						<&cpu2 THERMAL_NO_LIMIT
> -						THERMAL_NO_LIMIT>;
> -				};
> -				map2 {
> -					trip = <&cpu_alert>;
> -					cooling-device =
> -						<&cpu4 THERMAL_NO_LIMIT
> -						THERMAL_NO_LIMIT>;
> -				};
> -				map3 {
> -					trip = <&cpu_alert>;
> -					cooling-device =
> -						<&cpu6 THERMAL_NO_LIMIT
> -						THERMAL_NO_LIMIT>;
> -				};
> -			};
> -		};
> -	};
> +	#include "fsl-tmu.dtsi"
> 
>  	timer {
>  		compatible = "arm,armv8-timer";
> @@ -692,6 +645,7 @@
>  					<0000 0 0 4 &gic 0 0 0 127 4>;
>  		};
> 
> +
>  		sata0: sata@3200000 {
>  			status = "disabled";
>  			compatible = "fsl,ls2080a-ahci";
> @@ -758,3 +712,36 @@
>  		};
>  	};
>  };
> +
> +#include "fsl-tmu-map1.dtsi"
> +#include "fsl-tmu-map2.dtsi"
> +#include "fsl-tmu-map3.dtsi"
> +&thermal_zones {
> +	thermal-zone1 {
> +		status = "okay";
> +	};
> +
> +	thermal-zone2{
> +		status = "okay";
> +	};
> +
> +	thermal-zone3{
> +		status = "okay";
> +	};
> +
> +	thermal-zone4{
> +		status = "okay";
> +	};
> +
> +	thermal-zone5{
> +		status = "okay";
> +	};
> +
> +	thermal-zone6{
> +		status = "okay";
> +	};
> +
> +	thermal-zone7 {
> +		status = "okay";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
> new file mode 100644
> index 0000000..87e0d2e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree Include file for Thermal Monitor Unit.
> + *
> + * Copyright 2018 NXP
> + *
> + * Tang Yuantian <andy.tang@nxp.com>
> + *
> + */
> +
> +&thermal_zones {
> +	thermal-zone0 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert0>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone1 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert1>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone2 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert2>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone3 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert3>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone4 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert4>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone5 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert5>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone6 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert6>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone7 {
> +		cooling-maps {
> +			map1 {
> +				trip = <&alert7>;
> +				cooling-device =
> +					<&cooling_map1 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
> new file mode 100644
> index 0000000..7e35073
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree Include file for Thermal Monitor Unit.
> + *
> + * Copyright 2018 NXP
> + *
> + * Tang Yuantian <andy.tang@nxp.com>
> + *
> + */
> +
> +&thermal_zones {
> +	thermal-zone0 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert0>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone1 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert1>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone2 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert2>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone3 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert3>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone4 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert4>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone5 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert5>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone6 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert6>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone7 {
> +		cooling-maps {
> +			map2 {
> +				trip = <&alert7>;
> +				cooling-device =
> +					<&cooling_map2 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
> new file mode 100644
> index 0000000..dcde943
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree Include file for Thermal Monitor Unit.
> + *
> + * Copyright 2018 NXP
> + *
> + * Tang Yuantian <andy.tang@nxp.com>
> + *
> + */
> +
> +&thermal_zones {
> +	thermal-zone0 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert0>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone1 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert1>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone2 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert2>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone3 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert3>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone4 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert4>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone5 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert5>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone6 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert6>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone7 {
> +		cooling-maps {
> +			map3 {
> +				trip = <&alert7>;
> +				cooling-device =
> +					<&cooling_map3 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
> new file mode 100644
> index 0000000..133d2dc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
> @@ -0,0 +1,251 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree Include file for Thermal Monitor Unit.
> + *
> + * Copyright 2018 NXP
> + *
> + * Tang Yuantian <andy.tang@nxp.com>
> + *
> + */
> +
> +thermal_zones: thermal-zones {
> +	thermal_zone0: thermal-zone0 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 0>;
> +		status = "disabled";
> +
> +		trips {
> +			alert0: alert0 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit0: crit0 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert0>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone1 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 1>;
> +		status = "disabled";
> +
> +		trips {
> +			alert1: alert1 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit1: crit1 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert1>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone2 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 2>;
> +		status = "disabled";
> +
> +		trips {
> +			alert2: alert2 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit2: crit2 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert2>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone3 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 3>;
> +		status = "disabled";
> +
> +		trips {
> +			alert3: alert3 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit3: crit3 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert3>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone4 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 4>;
> +		status = "disabled";
> +
> +		trips {
> +			alert4: alert4 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit4: crit4 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert4>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone5 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 5>;
> +		status = "disabled";
> +
> +		trips {
> +			alert5: alert5 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit5: crit5 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert5>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone6 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 6>;
> +		status = "disabled";
> +
> +		trips {
> +			alert6: alert6 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit6: crit6 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert6>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +
> +	thermal-zone7 {
> +		polling-delay-passive = <1000>;
> +		polling-delay = <5000>;
> +		thermal-sensors = <&tmu 7>;
> +		status = "disabled";
> +
> +		trips {
> +			alert7: alert7 {
> +				temperature = <75000>;
> +				hysteresis = <2000>;
> +				type = "passive";
> +			};
> +
> +			crit7: crit7 {
> +				temperature = <85000>;
> +				hysteresis = <2000>;
> +				type = "critical";
> +			};
> +		};
> +
> +		cooling-maps {
> +			map0 {
> +				trip = <&alert7>;
> +				cooling-device =
> +					<&cooling_map0 THERMAL_NO_LIMIT
> +					THERMAL_NO_LIMIT>;
> +			};
> +		};
> +	};
> +};
> --
> 1.7.1
Shawn Guo Dec. 19, 2018, 4:08 a.m. UTC | #2
On Tue, Dec 18, 2018 at 07:01:32AM +0000, Andy Tang wrote:
> Hi,
> 
> PING.
> 
> BR,
> Andy
> 
> > -----Original Message-----
> > From: Yuantian Tang <andy.tang@nxp.com>
> > Sent: 2018年10月31日 12:48
> > To: shawnguo@kernel.org
> > Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org; mark.rutland@arm.com;
> > linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> > linux-kernel@vger.kernel.org; rui.zhang@intel.com; daniel.lezcano@linaro.org;
> > Andy Tang <andy.tang@nxp.com>
> > Subject: [PATCH] arm64: dts: nxp: ls208xa: add more thermal zone support
> > 
> > Ls208xa has several thermal sensors. Add all the sensor id to dts to enable
> > them.
> > 
> > To make the dts cleaner, re-organize the nodes to split out the common part so
> > that it can be shared with other SoCs.
> > 
> > Signed-off-by: Yuantian Tang <andy.tang@nxp.com>

Please take a look at patch below.

https://patchwork.kernel.org/patch/10685815/

Shawn
Yuantian Tang Dec. 20, 2018, 3:12 a.m. UTC | #3
> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2018年12月19日 12:08
> To: Andy Tang <andy.tang@nxp.com>
> Cc: mark.rutland@arm.com; devicetree@vger.kernel.org;
> daniel.lezcano@linaro.org; linux-kernel@vger.kernel.org; Leo Li
> <leoyang.li@nxp.com>; robh+dt@kernel.org; rui.zhang@intel.com;
> linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH] arm64: dts: nxp: ls208xa: add more thermal zone support
> 
> On Tue, Dec 18, 2018 at 07:01:32AM +0000, Andy Tang wrote:
> > Hi,
> >
> > PING.
> >
> > BR,
> > Andy
> >
> > > -----Original Message-----
> > > From: Yuantian Tang <andy.tang@nxp.com>
> > > Sent: 2018年10月31日 12:48
> > > To: shawnguo@kernel.org
> > > Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org;
> > > mark.rutland@arm.com; linux-arm-kernel@lists.infradead.org;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > rui.zhang@intel.com; daniel.lezcano@linaro.org; Andy Tang
> > > <andy.tang@nxp.com>
> > > Subject: [PATCH] arm64: dts: nxp: ls208xa: add more thermal zone
> > > support
> > >
> > > Ls208xa has several thermal sensors. Add all the sensor id to dts to
> > > enable them.
> > >
> > > To make the dts cleaner, re-organize the nodes to split out the
> > > common part so that it can be shared with other SoCs.
> > >
> > > Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> 
> Please take a look at patch below.
> 
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatch
> work.kernel.org%2Fpatch%2F10685815%2F&amp;data=02%7C01%7Candy.tang
> %40nxp.com%7C440d607feede45068dc608d66567c978%7C686ea1d3bc2b4c6fa
> 92cd99c5c301635%7C0%7C0%7C636807893765936983&amp;sdata=QC%2By9f
> mvI42t9eS3LS4YGD23Kqq6EUD0EpIGnDEDhrA%3D&amp;reserved=0
> 
Thanks, will rebase my patch.

BR,
Andy
> Shawn

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index f9c1d30..8f9788c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -12,7 +12,7 @@ 
 #include "fsl-ls208xa.dtsi"
 
 &cpu {
-	cpu0: cpu@0 {
+	cooling_map0: cpu0: cpu@0 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a57";
 		reg = <0x0>;
@@ -32,7 +32,7 @@ 
 		#cooling-cells = <2>;
 	};
 
-	cpu2: cpu@100 {
+	cooling_map1: cpu2: cpu@100 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a57";
 		reg = <0x100>;
@@ -52,7 +52,7 @@ 
 		#cooling-cells = <2>;
 	};
 
-	cpu4: cpu@200 {
+	cooling_map2: cpu4: cpu@200 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a57";
 		reg = <0x200>;
@@ -72,7 +72,7 @@ 
 		#cooling-cells = <2>;
 	};
 
-	cpu6: cpu@300 {
+	cooling_map3: cpu6: cpu@300 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a57";
 		reg = <0x300>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 7c882da..013fe16 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -12,7 +12,7 @@ 
 #include "fsl-ls208xa.dtsi"
 
 &cpu {
-	cpu0: cpu@0 {
+	cooling_map0: cpu0: cpu@0 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a72";
 		reg = <0x0>;
@@ -32,7 +32,7 @@ 
 		#cooling-cells = <2>;
 	};
 
-	cpu2: cpu@100 {
+	cooling_map1: cpu2: cpu@100 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a72";
 		reg = <0x100>;
@@ -52,7 +52,7 @@ 
 		#cooling-cells = <2>;
 	};
 
-	cpu4: cpu@200 {
+	cooling_map2: cpu4: cpu@200 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a72";
 		reg = <0x200>;
@@ -72,7 +72,7 @@ 
 		#cooling-cells = <2>;
 	};
 
-	cpu6: cpu@300 {
+	cooling_map3: cpu6: cpu@300 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a72";
 		reg = <0x300>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 8cb78dd..4102317 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -75,54 +75,7 @@ 
 		mask = <0x2>;
 	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <1000>;
-			polling-delay = <5000>;
-
-			thermal-sensors = <&tmu 4>;
-
-			trips {
-				cpu_alert: cpu-alert {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit: cpu-crit {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu2 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-				map2 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu4 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-				map3 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu6 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
+	#include "fsl-tmu.dtsi"
 
 	timer {
 		compatible = "arm,armv8-timer";
@@ -692,6 +645,7 @@ 
 					<0000 0 0 4 &gic 0 0 0 127 4>;
 		};
 
+
 		sata0: sata@3200000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
@@ -758,3 +712,36 @@ 
 		};
 	};
 };
+
+#include "fsl-tmu-map1.dtsi"
+#include "fsl-tmu-map2.dtsi"
+#include "fsl-tmu-map3.dtsi"
+&thermal_zones {
+	thermal-zone1 {
+		status = "okay";
+	};
+
+	thermal-zone2{
+		status = "okay";
+	};
+
+	thermal-zone3{
+		status = "okay";
+	};
+
+	thermal-zone4{
+		status = "okay";
+	};
+
+	thermal-zone5{
+		status = "okay";
+	};
+
+	thermal-zone6{
+		status = "okay";
+	};
+
+	thermal-zone7 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
new file mode 100644
index 0000000..87e0d2e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi
@@ -0,0 +1,99 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Thermal Monitor Unit.
+ *
+ * Copyright 2018 NXP
+ *
+ * Tang Yuantian <andy.tang@nxp.com>
+ *
+ */
+
+&thermal_zones {
+	thermal-zone0 {
+		cooling-maps {
+			map1 {
+				trip = <&alert0>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone1 {
+		cooling-maps {
+			map1 {
+				trip = <&alert1>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone2 {
+		cooling-maps {
+			map1 {
+				trip = <&alert2>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone3 {
+		cooling-maps {
+			map1 {
+				trip = <&alert3>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone4 {
+		cooling-maps {
+			map1 {
+				trip = <&alert4>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone5 {
+		cooling-maps {
+			map1 {
+				trip = <&alert5>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone6 {
+		cooling-maps {
+			map1 {
+				trip = <&alert6>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone7 {
+		cooling-maps {
+			map1 {
+				trip = <&alert7>;
+				cooling-device =
+					<&cooling_map1 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
new file mode 100644
index 0000000..7e35073
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi
@@ -0,0 +1,99 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Thermal Monitor Unit.
+ *
+ * Copyright 2018 NXP
+ *
+ * Tang Yuantian <andy.tang@nxp.com>
+ *
+ */
+
+&thermal_zones {
+	thermal-zone0 {
+		cooling-maps {
+			map2 {
+				trip = <&alert0>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone1 {
+		cooling-maps {
+			map2 {
+				trip = <&alert1>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone2 {
+		cooling-maps {
+			map2 {
+				trip = <&alert2>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone3 {
+		cooling-maps {
+			map2 {
+				trip = <&alert3>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone4 {
+		cooling-maps {
+			map2 {
+				trip = <&alert4>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone5 {
+		cooling-maps {
+			map2 {
+				trip = <&alert5>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone6 {
+		cooling-maps {
+			map2 {
+				trip = <&alert6>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone7 {
+		cooling-maps {
+			map2 {
+				trip = <&alert7>;
+				cooling-device =
+					<&cooling_map2 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
new file mode 100644
index 0000000..dcde943
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi
@@ -0,0 +1,99 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Thermal Monitor Unit.
+ *
+ * Copyright 2018 NXP
+ *
+ * Tang Yuantian <andy.tang@nxp.com>
+ *
+ */
+
+&thermal_zones {
+	thermal-zone0 {
+		cooling-maps {
+			map3 {
+				trip = <&alert0>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone1 {
+		cooling-maps {
+			map3 {
+				trip = <&alert1>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone2 {
+		cooling-maps {
+			map3 {
+				trip = <&alert2>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone3 {
+		cooling-maps {
+			map3 {
+				trip = <&alert3>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone4 {
+		cooling-maps {
+			map3 {
+				trip = <&alert4>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone5 {
+		cooling-maps {
+			map3 {
+				trip = <&alert5>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone6 {
+		cooling-maps {
+			map3 {
+				trip = <&alert6>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone7 {
+		cooling-maps {
+			map3 {
+				trip = <&alert7>;
+				cooling-device =
+					<&cooling_map3 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
new file mode 100644
index 0000000..133d2dc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi
@@ -0,0 +1,251 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Thermal Monitor Unit.
+ *
+ * Copyright 2018 NXP
+ *
+ * Tang Yuantian <andy.tang@nxp.com>
+ *
+ */
+
+thermal_zones: thermal-zones {
+	thermal_zone0: thermal-zone0 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 0>;
+		status = "disabled";
+
+		trips {
+			alert0: alert0 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit0: crit0 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert0>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone1 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 1>;
+		status = "disabled";
+
+		trips {
+			alert1: alert1 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit1: crit1 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert1>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone2 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 2>;
+		status = "disabled";
+
+		trips {
+			alert2: alert2 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit2: crit2 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert2>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone3 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 3>;
+		status = "disabled";
+
+		trips {
+			alert3: alert3 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit3: crit3 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert3>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone4 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 4>;
+		status = "disabled";
+
+		trips {
+			alert4: alert4 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit4: crit4 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert4>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone5 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 5>;
+		status = "disabled";
+
+		trips {
+			alert5: alert5 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit5: crit5 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert5>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone6 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 6>;
+		status = "disabled";
+
+		trips {
+			alert6: alert6 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit6: crit6 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert6>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+
+	thermal-zone7 {
+		polling-delay-passive = <1000>;
+		polling-delay = <5000>;
+		thermal-sensors = <&tmu 7>;
+		status = "disabled";
+
+		trips {
+			alert7: alert7 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			crit7: crit7 {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&alert7>;
+				cooling-device =
+					<&cooling_map0 THERMAL_NO_LIMIT
+					THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};