diff mbox series

[V2] arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB

Message ID 20181104203707.20996-1-marek.vasut+renesas@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V2] arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB | expand

Commit Message

Marek Vasut Nov. 4, 2018, 8:37 p.m. UTC 
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is
connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
the pinmux to match the bus, which is always operating in 1.8V mode.

While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
---
V2: - Squash patches for multiple boards together
    - Deduplicate pinmux entries
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 8 +-------
 arch/arm64/boot/dts/renesas/ulcb.dtsi            | 8 +-------
 2 files changed, 2 insertions(+), 14 deletions(-)

Comments

Wolfram Sang Nov. 6, 2018, 10:57 a.m. UTC | #1 
On Sun, Nov 04, 2018 at 09:37:07PM +0100, Marek Vasut wrote:
> The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
> array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is
> connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
> the pinmux to match the bus, which is always operating in 1.8V mode.
> 
> While at it, deduplicate the pinmux entries, which are now the same for
> both default and UHS modes. We still need the two pinctrl entries to
> match the bindings though.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Simon Horman <horms+renesas@verge.net.au>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-mmc@vger.kernel.org

Tested on M3-N and H3 ES2.0 with HS400 enabled eMMC:

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Simon Horman Nov. 6, 2018, 12:14 p.m. UTC | #2 
On Tue, Nov 06, 2018 at 11:57:17AM +0100, Wolfram Sang wrote:
> On Sun, Nov 04, 2018 at 09:37:07PM +0100, Marek Vasut wrote:
> > The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
> > array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is
> > connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
> > the pinmux to match the bus, which is always operating in 1.8V mode.
> > 
> > While at it, deduplicate the pinmux entries, which are now the same for
> > both default and UHS modes. We still need the two pinctrl entries to
> > match the bindings though.
> > 
> > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> > Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> > Cc: Simon Horman <horms+renesas@verge.net.au>
> > Cc: Wolfram Sang <wsa@the-dreams.de>
> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > Cc: linux-renesas-soc@vger.kernel.org
> > Cc: linux-mmc@vger.kernel.org
> 
> Tested on M3-N and H3 ES2.0 with HS400 enabled eMMC:
> 
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Thanks, applied for v4.21.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 7f91ff524109..69775a201b4d 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -605,12 +605,6 @@ 
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
 		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
@@ -760,7 +754,7 @@ 
 &sdhi2 {
 	/* used for on-board 8bit eMMC */
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-1 = <&sdhi2_pins>;
 	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&reg_3p3v>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 89daca7356df..de694fdae067 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -330,12 +330,6 @@ 
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
 		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
@@ -426,7 +420,7 @@ 
 &sdhi2 {
 	/* used for on-board 8bit eMMC */
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-1 = <&sdhi2_pins>;
 	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&reg_3p3v>;