Applied "spi: uniphier: fix incorrect property items" to the spi tree
diff mbox series

Message ID
State New, archived
Headers show
  • Applied "spi: uniphier: fix incorrect property items" to the spi tree
Related show

Commit Message

Mark Brown Nov. 6, 2018, 6:22 p.m. UTC
The patch

   spi: uniphier: fix incorrect property items

has been applied to the spi tree at 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.


From 4642f0bede4f3e0e460ae0e52286df606832b291 Mon Sep 17 00:00:00 2001
From: Keiji Hayashibara <>
Date: Fri, 26 Oct 2018 14:58:44 +0900
Subject: [PATCH] spi: uniphier: fix incorrect property items

This commit fixes incorrect property because it was different
from the actual.
The parameters of '#address-cells' and '#size-cells' were removed,
and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.

Fixes: 4dcd5c2781f3 ("spi: add DT bindings for UniPhier SPI controller")
Signed-off-by: Keiji Hayashibara <>
Signed-off-by: Mark Brown <>
 .../devicetree/bindings/spi/spi-uniphier.txt       | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff mbox series

diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
index 504a4ecfc7b1..b04e66a52de5 100644
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -5,18 +5,20 @@  UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device
 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;