[1/2] media: cxd2880-spi: Add optional vcc regulator
diff mbox series

Message ID 1541681410-8187-2-git-send-email-narmstrong@baylibre.com
State New
Headers show
Series
  • sony-cxd2880: add optional vcc regulator
Related show

Commit Message

Neil Armstrong Nov. 8, 2018, 12:50 p.m. UTC
This patchset adds an optional VCC regulator to the driver probe function to
make sure power is enabled to the module before starting attaching to
the device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/media/spi/cxd2880-spi.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Patch
diff mbox series

diff --git a/drivers/media/spi/cxd2880-spi.c b/drivers/media/spi/cxd2880-spi.c
index c437309..d5c433e 100644
--- a/drivers/media/spi/cxd2880-spi.c
+++ b/drivers/media/spi/cxd2880-spi.c
@@ -10,6 +10,7 @@ 
 #define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
 
 #include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
 #include <linux/ktime.h>
 
 #include <media/dvb_demux.h>
@@ -51,6 +52,7 @@  struct cxd2880_dvb_spi {
 	struct mutex spi_mutex; /* For SPI access exclusive control */
 	int feed_count;
 	int all_pid_feed_count;
+	struct regulator *vcc_supply;
 	u8 *ts_buf;
 	struct cxd2880_pid_filter_config filter_config;
 };
@@ -518,6 +520,17 @@  cxd2880_spi_probe(struct spi_device *spi)
 	if (!dvb_spi)
 		return -ENOMEM;
 
+	dvb_spi->vcc_supply = devm_regulator_get_optional(&spi->dev, "vcc");
+	if (IS_ERR(dvb_spi->vcc_supply)) {
+		if (PTR_ERR(dvb_spi->vcc_supply) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dvb_spi->vcc_supply = NULL;
+	} else {
+		ret = regulator_enable(dvb_spi->vcc_supply);
+		if (ret)
+			return ret;
+	}
+
 	dvb_spi->spi = spi;
 	mutex_init(&dvb_spi->spi_mutex);
 	dev_set_drvdata(&spi->dev, dvb_spi);
@@ -631,6 +644,9 @@  cxd2880_spi_remove(struct spi_device *spi)
 	dvb_frontend_detach(&dvb_spi->dvb_fe);
 	dvb_unregister_adapter(&dvb_spi->adapter);
 
+	if (dvb_spi->vcc_supply)
+		regulator_disable(dvb_spi->vcc_supply);
+
 	kfree(dvb_spi);
 	pr_info("cxd2880_spi remove ok.\n");