| Message ID | 20181113192226.17762-1-marek.vasut+renesas@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | ba3ac35b4896cf291f6fdaf04a505985e5ccce30 |
| Delegated to: | Simon Horman |
| Headers | show |
| Series | arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node | expand |
On Tue, Nov 13, 2018 at 08:22:26PM +0100, Marek Vasut wrote: > From: Takeshi Kihara <takeshi.kihara.df@renesas.com> > > This patch adds PCI express channel 0 device node to the R8A77990 SoC > and enables PCIEC0 PCI express controller on the Ebisu board. > > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: Simon Horman <horms+renesas@verge.net.au> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > Cc: linux-renesas-soc@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > To: devicetree@vger.kernel.org > --- > .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 8 +++++ > arch/arm64/boot/dts/renesas/r8a77990.dtsi | 34 +++++++++++++++++++ > 2 files changed, 42 insertions(+) Thanks Marek, applied for v4.21.
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 447e9831104a..2ef9067616ee 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -444,6 +444,14 @@ status = "okay"; }; +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + status = "okay"; +}; + &pfc { avb_pins: avb { mux { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index a2524fc138a2..46868dacbeef 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -85,6 +85,13 @@ clock-frequency = <0>; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + pmu_a53 { compatible = "arm,cortex-a53-pmu"; interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, @@ -1610,6 +1617,33 @@ }; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77990", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>;