[v9,20/24] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable
diff mbox series

Message ID 20181114015232.21952-21-manasi.d.navare@intel.com
State New
Headers show
Series
  • Remaining DSC + FEC patches
Related show

Commit Message

Manasi Navare Nov. 14, 2018, 1:52 a.m. UTC
DSC can be supported per DP connector. This patch adds a per connector
debugfs node to expose DSC support capability by the kernel.
The same node can be used from userspace to force DSC enable.

force_dsc_en written through this debugfs node is used to force
DSC even for lower resolutions.

v4:
* Add missed connector_status check (Manasi)
* Create i915_dsc_support node only for Gen >=10 (manasi)
* Access intel_dp->dsc_dpcd only if its not NULL (Manasi)
v3:
* Combine Force_dsc_en with this patch (Ville)
v2:
* Use kstrtobool_from_user to avoid explicit error checking (Lyude)
* Rebase on drm-tip (Manasi)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 77 +++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp.c     |  3 +-
 drivers/gpu/drm/i915/intel_drv.h    |  3 ++
 3 files changed, 82 insertions(+), 1 deletion(-)

Comments

Manasi Navare Nov. 16, 2018, 1:39 a.m. UTC | #1
On Tue, Nov 13, 2018 at 05:52:28PM -0800, Manasi Navare wrote:
> DSC can be supported per DP connector. This patch adds a per connector
> debugfs node to expose DSC support capability by the kernel.
> The same node can be used from userspace to force DSC enable.
> 
> force_dsc_en written through this debugfs node is used to force
> DSC even for lower resolutions.
> 
> v4:
> * Add missed connector_status check (Manasi)
> * Create i915_dsc_support node only for Gen >=10 (manasi)
> * Access intel_dp->dsc_dpcd only if its not NULL (Manasi)
> v3:
> * Combine Force_dsc_en with this patch (Ville)
> v2:
> * Use kstrtobool_from_user to avoid explicit error checking (Lyude)
> * Rebase on drm-tip (Manasi)
> 
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Cc: Lyude Paul <lyude@redhat.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Lyude Paul <lyude@redhat.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 77 +++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_dp.c     |  3 +-
>  drivers/gpu/drm/i915/intel_drv.h    |  3 ++
>  3 files changed, 82 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 670db5073d70..3c112bb225d6 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -5074,6 +5074,76 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data)
>  }
>  DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
>  
> +static int i915_dsc_support_show(struct seq_file *m, void *data)
> +{
> +	struct drm_connector *connector = m->private;
> +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> +	struct intel_dp *intel_dp =
> +		enc_to_intel_dp(&encoder->base);
> +	struct intel_crtc *crtc;
> +	struct intel_crtc_state *crtc_state;
> +
> +	if (connector->status != connector_status_connected)
> +		return -ENODEV;
> +
> +	crtc = to_intel_crtc(encoder->base.crtc);
> +	crtc_state = to_intel_crtc_state(crtc->base.state);
> +	drm_modeset_lock(&crtc->base.mutex, NULL);
> +	seq_printf(m, "Enabled: %s\n",
> +		   yesno(crtc_state->dsc_params.compression_enable));
> +	if (intel_dp->dsc_dpcd)
> +		seq_printf(m, "Supported: %s\n",
> +			   yesno(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));

I think this supported should also use the intel_dp_supports_dsc() helper so
it checks for sink support and platform support as well.

Ville, what do you think?

Manasi

> +	drm_modeset_unlock(&crtc->base.mutex);
> +
> +	return 0;
> +}
> +
> +static ssize_t i915_dsc_support_write(struct file *file,
> +				      const char __user *ubuf,
> +				      size_t len, loff_t *offp)
> +{
> +	bool dsc_enable = false;
> +	int ret;
> +	struct drm_connector *connector =
> +		((struct seq_file *)file->private_data)->private;
> +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> +	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> +
> +	if (len == 0)
> +		return 0;
> +
> +	DRM_DEBUG_DRIVER("Copied %d bytes from user to force DSC\n",
> +			 (unsigned int)len);
> +
> +	ret = kstrtobool_from_user(ubuf, len, &dsc_enable);
> +	if (ret < 0)
> +		return ret;
> +
> +	DRM_DEBUG_DRIVER("Got %s for DSC Enable\n",
> +			 (dsc_enable) ? "true" : "false");
> +	intel_dp->force_dsc_en = dsc_enable;
> +
> +	*offp += len;
> +	return len;
> +}
> +
> +static int i915_dsc_support_open(struct inode *inode,
> +				 struct file *file)
> +{
> +	return single_open(file, i915_dsc_support_show,
> +			   inode->i_private);
> +}
> +
> +static const struct file_operations i915_dsc_support_fops = {
> +	.owner = THIS_MODULE,
> +	.open = i915_dsc_support_open,
> +	.read = seq_read,
> +	.llseek = seq_lseek,
> +	.release = single_release,
> +	.write = i915_dsc_support_write
> +};
> +
>  /**
>   * i915_debugfs_connector_add - add i915 specific connector debugfs files
>   * @connector: pointer to a registered drm_connector
> @@ -5086,6 +5156,7 @@ DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
>  int i915_debugfs_connector_add(struct drm_connector *connector)
>  {
>  	struct dentry *root = connector->debugfs_entry;
> +	struct drm_i915_private *dev_priv = to_i915(connector->dev);
>  
>  	/* The connector must have been registered beforehands. */
>  	if (!root)
> @@ -5110,5 +5181,11 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
>  				    connector, &i915_hdcp_sink_capability_fops);
>  	}
>  
> +	if (INTEL_GEN(dev_priv) >= 10 &&
> +	    (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> +	     connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> +		debugfs_create_file("i915_dsc_support", S_IRUGO, root,
> +				    connector, &i915_dsc_support_fops);
> +
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index b43a77bf42df..99e0dd0e32d6 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -2042,7 +2042,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>  							&limits);
>  
>  	/* enable compression if the mode doesn't fit available BW */
> -	if (!ret) {
> +	if (!ret || intel_dp->force_dsc_en) {
>  		if (!intel_dp_dsc_compute_config(intel_dp, pipe_config,
>  						 conn_state, &limits))
>  			return false;
> @@ -2135,6 +2135,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
>  		return false;
>  
> +	DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
>  	if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
>  		return false;
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 92e987fc3d9f..9eeb08142327 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1200,6 +1200,9 @@ struct intel_dp {
>  
>  	/* Displayport compliance testing */
>  	struct intel_dp_compliance compliance;
> +
> +	/* Display stream compression testing */
> +	bool force_dsc_en;
>  };
>  
>  enum lspcon_vendor {
> -- 
> 2.19.1
>
Ville Syrjala Nov. 19, 2018, 8:27 p.m. UTC | #2
On Thu, Nov 15, 2018 at 05:39:42PM -0800, Manasi Navare wrote:
> On Tue, Nov 13, 2018 at 05:52:28PM -0800, Manasi Navare wrote:
> > DSC can be supported per DP connector. This patch adds a per connector
> > debugfs node to expose DSC support capability by the kernel.
> > The same node can be used from userspace to force DSC enable.
> > 
> > force_dsc_en written through this debugfs node is used to force
> > DSC even for lower resolutions.
> > 
> > v4:
> > * Add missed connector_status check (Manasi)
> > * Create i915_dsc_support node only for Gen >=10 (manasi)
> > * Access intel_dp->dsc_dpcd only if its not NULL (Manasi)
> > v3:
> > * Combine Force_dsc_en with this patch (Ville)
> > v2:
> > * Use kstrtobool_from_user to avoid explicit error checking (Lyude)
> > * Rebase on drm-tip (Manasi)
> > 
> > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> > Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > Cc: Lyude Paul <lyude@redhat.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > Reviewed-by: Lyude Paul <lyude@redhat.com>
> > ---
> >  drivers/gpu/drm/i915/i915_debugfs.c | 77 +++++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/intel_dp.c     |  3 +-
> >  drivers/gpu/drm/i915/intel_drv.h    |  3 ++
> >  3 files changed, 82 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 670db5073d70..3c112bb225d6 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -5074,6 +5074,76 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data)
> >  }
> >  DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
> >  
> > +static int i915_dsc_support_show(struct seq_file *m, void *data)
> > +{
> > +	struct drm_connector *connector = m->private;
> > +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> > +	struct intel_dp *intel_dp =
> > +		enc_to_intel_dp(&encoder->base);
> > +	struct intel_crtc *crtc;
> > +	struct intel_crtc_state *crtc_state;
> > +
> > +	if (connector->status != connector_status_connected)
> > +		return -ENODEV;
> > +
> > +	crtc = to_intel_crtc(encoder->base.crtc);
> > +	crtc_state = to_intel_crtc_state(crtc->base.state);

This stuff is broken. If you want to root around in the atomic states
you need to grab some locks first.

> > +	drm_modeset_lock(&crtc->base.mutex, NULL);
> > +	seq_printf(m, "Enabled: %s\n",
> > +		   yesno(crtc_state->dsc_params.compression_enable));
> > +	if (intel_dp->dsc_dpcd)
> > +		seq_printf(m, "Supported: %s\n",
> > +			   yesno(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));
> 
> I think this supported should also use the intel_dp_supports_dsc() helper so
> it checks for sink support and platform support as well.
> 
> Ville, what do you think?

Possibly. We may want to report per-crtc whether DSC is possible or not
(due to transcoder A not being capable of DSC). And to do that we
actually need to change intel_dp_source_supports_dsc() & co. to not take
the crtc state, and rather we just need to pass in the transcoder. That
would mean we have to determine the correct transcoder here. Perhaps
a better alternative would be to pass in pipe/crtc + port and let the
function derive the transcoder itself. That would keep the
pipe+port->transcoder logic in one place. Actually we have that logic
in two places at least already (intel_ddi_compute_config() and
intel_ddi_connector_get_hw_state()). We could extract that bit into
a small helper that gets called by all three places.

> 
> Manasi
> 
> > +	drm_modeset_unlock(&crtc->base.mutex);
> > +
> > +	return 0;
> > +}
> > +
> > +static ssize_t i915_dsc_support_write(struct file *file,
> > +				      const char __user *ubuf,
> > +				      size_t len, loff_t *offp)
> > +{
> > +	bool dsc_enable = false;
> > +	int ret;
> > +	struct drm_connector *connector =
> > +		((struct seq_file *)file->private_data)->private;
> > +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> > +	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > +
> > +	if (len == 0)
> > +		return 0;
> > +
> > +	DRM_DEBUG_DRIVER("Copied %d bytes from user to force DSC\n",
> > +			 (unsigned int)len);
> > +
> > +	ret = kstrtobool_from_user(ubuf, len, &dsc_enable);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	DRM_DEBUG_DRIVER("Got %s for DSC Enable\n",
> > +			 (dsc_enable) ? "true" : "false");
> > +	intel_dp->force_dsc_en = dsc_enable;
> > +
> > +	*offp += len;
> > +	return len;
> > +}
> > +
> > +static int i915_dsc_support_open(struct inode *inode,
> > +				 struct file *file)
> > +{
> > +	return single_open(file, i915_dsc_support_show,
> > +			   inode->i_private);
> > +}
> > +
> > +static const struct file_operations i915_dsc_support_fops = {
> > +	.owner = THIS_MODULE,
> > +	.open = i915_dsc_support_open,
> > +	.read = seq_read,
> > +	.llseek = seq_lseek,
> > +	.release = single_release,
> > +	.write = i915_dsc_support_write
> > +};
> > +
> >  /**
> >   * i915_debugfs_connector_add - add i915 specific connector debugfs files
> >   * @connector: pointer to a registered drm_connector
> > @@ -5086,6 +5156,7 @@ DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
> >  int i915_debugfs_connector_add(struct drm_connector *connector)
> >  {
> >  	struct dentry *root = connector->debugfs_entry;
> > +	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> >  
> >  	/* The connector must have been registered beforehands. */
> >  	if (!root)
> > @@ -5110,5 +5181,11 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
> >  				    connector, &i915_hdcp_sink_capability_fops);
> >  	}
> >  
> > +	if (INTEL_GEN(dev_priv) >= 10 &&
> > +	    (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> > +	     connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> > +		debugfs_create_file("i915_dsc_support", S_IRUGO, root,
> > +				    connector, &i915_dsc_support_fops);
> > +
> >  	return 0;
> >  }
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index b43a77bf42df..99e0dd0e32d6 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -2042,7 +2042,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> >  							&limits);
> >  
> >  	/* enable compression if the mode doesn't fit available BW */
> > -	if (!ret) {
> > +	if (!ret || intel_dp->force_dsc_en) {
> >  		if (!intel_dp_dsc_compute_config(intel_dp, pipe_config,
> >  						 conn_state, &limits))
> >  			return false;
> > @@ -2135,6 +2135,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> >  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
> >  		return false;
> >  
> > +	DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
> >  	if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
> >  		return false;
> >  
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 92e987fc3d9f..9eeb08142327 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1200,6 +1200,9 @@ struct intel_dp {
> >  
> >  	/* Displayport compliance testing */
> >  	struct intel_dp_compliance compliance;
> > +
> > +	/* Display stream compression testing */
> > +	bool force_dsc_en;
> >  };
> >  
> >  enum lspcon_vendor {
> > -- 
> > 2.19.1
> >
Manasi Navare Nov. 19, 2018, 10:28 p.m. UTC | #3
On Mon, Nov 19, 2018 at 10:27:44PM +0200, Ville Syrjälä wrote:
> On Thu, Nov 15, 2018 at 05:39:42PM -0800, Manasi Navare wrote:
> > On Tue, Nov 13, 2018 at 05:52:28PM -0800, Manasi Navare wrote:
> > > DSC can be supported per DP connector. This patch adds a per connector
> > > debugfs node to expose DSC support capability by the kernel.
> > > The same node can be used from userspace to force DSC enable.
> > > 
> > > force_dsc_en written through this debugfs node is used to force
> > > DSC even for lower resolutions.
> > > 
> > > v4:
> > > * Add missed connector_status check (Manasi)
> > > * Create i915_dsc_support node only for Gen >=10 (manasi)
> > > * Access intel_dp->dsc_dpcd only if its not NULL (Manasi)
> > > v3:
> > > * Combine Force_dsc_en with this patch (Ville)
> > > v2:
> > > * Use kstrtobool_from_user to avoid explicit error checking (Lyude)
> > > * Rebase on drm-tip (Manasi)
> > > 
> > > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > > Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> > > Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > > Cc: Lyude Paul <lyude@redhat.com>
> > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > Reviewed-by: Lyude Paul <lyude@redhat.com>
> > > ---
> > >  drivers/gpu/drm/i915/i915_debugfs.c | 77 +++++++++++++++++++++++++++++
> > >  drivers/gpu/drm/i915/intel_dp.c     |  3 +-
> > >  drivers/gpu/drm/i915/intel_drv.h    |  3 ++
> > >  3 files changed, 82 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > > index 670db5073d70..3c112bb225d6 100644
> > > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > > @@ -5074,6 +5074,76 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data)
> > >  }
> > >  DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
> > >  
> > > +static int i915_dsc_support_show(struct seq_file *m, void *data)
> > > +{
> > > +	struct drm_connector *connector = m->private;
> > > +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> > > +	struct intel_dp *intel_dp =
> > > +		enc_to_intel_dp(&encoder->base);
> > > +	struct intel_crtc *crtc;
> > > +	struct intel_crtc_state *crtc_state;
> > > +
> > > +	if (connector->status != connector_status_connected)
> > > +		return -ENODEV;
> > > +
> > > +	crtc = to_intel_crtc(encoder->base.crtc);
> > > +	crtc_state = to_intel_crtc_state(crtc->base.state);
> 
> This stuff is broken. If you want to root around in the atomic states
> you need to grab some locks first.

I thought using the drm_modeset_lock before grabbing the crtc_state value should
be enough.

Are you referring to using the locks like:
drm_modeset_lock_single_interruptible()?

> 
> > > +	drm_modeset_lock(&crtc->base.mutex, NULL);
> > > +	seq_printf(m, "Enabled: %s\n",
> > > +		   yesno(crtc_state->dsc_params.compression_enable));
> > > +	if (intel_dp->dsc_dpcd)
> > > +		seq_printf(m, "Supported: %s\n",
> > > +			   yesno(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));
> > 
> > I think this supported should also use the intel_dp_supports_dsc() helper so
> > it checks for sink support and platform support as well.
> > 
> > Ville, what do you think?
> 
> Possibly. We may want to report per-crtc whether DSC is possible or not
> (due to transcoder A not being capable of DSC). And to do that we
> actually need to change intel_dp_source_supports_dsc() & co. to not take
> the crtc state, and rather we just need to pass in the transcoder. That
> would mean we have to determine the correct transcoder here. Perhaps
> a better alternative would be to pass in pipe/crtc + port and let the
> function derive the transcoder itself. That would keep the
> pipe+port->transcoder logic in one place. Actually we have that logic
> in two places at least already (intel_ddi_compute_config() and
> intel_ddi_connector_get_hw_state()). We could extract that bit into
> a small helper that gets called by all three places.

So there would be Sink_Supported and Enabled separately and then for 
for_each_crtc loop and report out Source_supported for every crtc
by passing port and pipe/crtc and determining transcoder from that find
the intel_dp_source_supports_dsc for that transcoder ?

Is this the correct way?
Also should this be kept separately in a follow on series and get the simpler
version of intel_dp_supports_dsc() merged first?

Manasi

> 
> > 
> > Manasi
> > 
> > > +	drm_modeset_unlock(&crtc->base.mutex);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static ssize_t i915_dsc_support_write(struct file *file,
> > > +				      const char __user *ubuf,
> > > +				      size_t len, loff_t *offp)
> > > +{
> > > +	bool dsc_enable = false;
> > > +	int ret;
> > > +	struct drm_connector *connector =
> > > +		((struct seq_file *)file->private_data)->private;
> > > +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> > > +	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > > +
> > > +	if (len == 0)
> > > +		return 0;
> > > +
> > > +	DRM_DEBUG_DRIVER("Copied %d bytes from user to force DSC\n",
> > > +			 (unsigned int)len);
> > > +
> > > +	ret = kstrtobool_from_user(ubuf, len, &dsc_enable);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	DRM_DEBUG_DRIVER("Got %s for DSC Enable\n",
> > > +			 (dsc_enable) ? "true" : "false");
> > > +	intel_dp->force_dsc_en = dsc_enable;
> > > +
> > > +	*offp += len;
> > > +	return len;
> > > +}
> > > +
> > > +static int i915_dsc_support_open(struct inode *inode,
> > > +				 struct file *file)
> > > +{
> > > +	return single_open(file, i915_dsc_support_show,
> > > +			   inode->i_private);
> > > +}
> > > +
> > > +static const struct file_operations i915_dsc_support_fops = {
> > > +	.owner = THIS_MODULE,
> > > +	.open = i915_dsc_support_open,
> > > +	.read = seq_read,
> > > +	.llseek = seq_lseek,
> > > +	.release = single_release,
> > > +	.write = i915_dsc_support_write
> > > +};
> > > +
> > >  /**
> > >   * i915_debugfs_connector_add - add i915 specific connector debugfs files
> > >   * @connector: pointer to a registered drm_connector
> > > @@ -5086,6 +5156,7 @@ DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
> > >  int i915_debugfs_connector_add(struct drm_connector *connector)
> > >  {
> > >  	struct dentry *root = connector->debugfs_entry;
> > > +	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> > >  
> > >  	/* The connector must have been registered beforehands. */
> > >  	if (!root)
> > > @@ -5110,5 +5181,11 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
> > >  				    connector, &i915_hdcp_sink_capability_fops);
> > >  	}
> > >  
> > > +	if (INTEL_GEN(dev_priv) >= 10 &&
> > > +	    (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> > > +	     connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> > > +		debugfs_create_file("i915_dsc_support", S_IRUGO, root,
> > > +				    connector, &i915_dsc_support_fops);
> > > +
> > >  	return 0;
> > >  }
> > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > > index b43a77bf42df..99e0dd0e32d6 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > > @@ -2042,7 +2042,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> > >  							&limits);
> > >  
> > >  	/* enable compression if the mode doesn't fit available BW */
> > > -	if (!ret) {
> > > +	if (!ret || intel_dp->force_dsc_en) {
> > >  		if (!intel_dp_dsc_compute_config(intel_dp, pipe_config,
> > >  						 conn_state, &limits))
> > >  			return false;
> > > @@ -2135,6 +2135,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> > >  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
> > >  		return false;
> > >  
> > > +	DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
> > >  	if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
> > >  		return false;
> > >  
> > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > > index 92e987fc3d9f..9eeb08142327 100644
> > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > @@ -1200,6 +1200,9 @@ struct intel_dp {
> > >  
> > >  	/* Displayport compliance testing */
> > >  	struct intel_dp_compliance compliance;
> > > +
> > > +	/* Display stream compression testing */
> > > +	bool force_dsc_en;
> > >  };
> > >  
> > >  enum lspcon_vendor {
> > > -- 
> > > 2.19.1
> > > 
> 
> -- 
> Ville Syrjälä
> Intel
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Patch
diff mbox series

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 670db5073d70..3c112bb225d6 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -5074,6 +5074,76 @@  static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
 
+static int i915_dsc_support_show(struct seq_file *m, void *data)
+{
+	struct drm_connector *connector = m->private;
+	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct intel_dp *intel_dp =
+		enc_to_intel_dp(&encoder->base);
+	struct intel_crtc *crtc;
+	struct intel_crtc_state *crtc_state;
+
+	if (connector->status != connector_status_connected)
+		return -ENODEV;
+
+	crtc = to_intel_crtc(encoder->base.crtc);
+	crtc_state = to_intel_crtc_state(crtc->base.state);
+	drm_modeset_lock(&crtc->base.mutex, NULL);
+	seq_printf(m, "Enabled: %s\n",
+		   yesno(crtc_state->dsc_params.compression_enable));
+	if (intel_dp->dsc_dpcd)
+		seq_printf(m, "Supported: %s\n",
+			   yesno(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));
+	drm_modeset_unlock(&crtc->base.mutex);
+
+	return 0;
+}
+
+static ssize_t i915_dsc_support_write(struct file *file,
+				      const char __user *ubuf,
+				      size_t len, loff_t *offp)
+{
+	bool dsc_enable = false;
+	int ret;
+	struct drm_connector *connector =
+		((struct seq_file *)file->private_data)->private;
+	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+
+	if (len == 0)
+		return 0;
+
+	DRM_DEBUG_DRIVER("Copied %d bytes from user to force DSC\n",
+			 (unsigned int)len);
+
+	ret = kstrtobool_from_user(ubuf, len, &dsc_enable);
+	if (ret < 0)
+		return ret;
+
+	DRM_DEBUG_DRIVER("Got %s for DSC Enable\n",
+			 (dsc_enable) ? "true" : "false");
+	intel_dp->force_dsc_en = dsc_enable;
+
+	*offp += len;
+	return len;
+}
+
+static int i915_dsc_support_open(struct inode *inode,
+				 struct file *file)
+{
+	return single_open(file, i915_dsc_support_show,
+			   inode->i_private);
+}
+
+static const struct file_operations i915_dsc_support_fops = {
+	.owner = THIS_MODULE,
+	.open = i915_dsc_support_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.write = i915_dsc_support_write
+};
+
 /**
  * i915_debugfs_connector_add - add i915 specific connector debugfs files
  * @connector: pointer to a registered drm_connector
@@ -5086,6 +5156,7 @@  DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability);
 int i915_debugfs_connector_add(struct drm_connector *connector)
 {
 	struct dentry *root = connector->debugfs_entry;
+	struct drm_i915_private *dev_priv = to_i915(connector->dev);
 
 	/* The connector must have been registered beforehands. */
 	if (!root)
@@ -5110,5 +5181,11 @@  int i915_debugfs_connector_add(struct drm_connector *connector)
 				    connector, &i915_hdcp_sink_capability_fops);
 	}
 
+	if (INTEL_GEN(dev_priv) >= 10 &&
+	    (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	     connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+		debugfs_create_file("i915_dsc_support", S_IRUGO, root,
+				    connector, &i915_dsc_support_fops);
+
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b43a77bf42df..99e0dd0e32d6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2042,7 +2042,7 @@  intel_dp_compute_link_config(struct intel_encoder *encoder,
 							&limits);
 
 	/* enable compression if the mode doesn't fit available BW */
-	if (!ret) {
+	if (!ret || intel_dp->force_dsc_en) {
 		if (!intel_dp_dsc_compute_config(intel_dp, pipe_config,
 						 conn_state, &limits))
 			return false;
@@ -2135,6 +2135,7 @@  intel_dp_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return false;
 
+	DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);
 	if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
 		return false;
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 92e987fc3d9f..9eeb08142327 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1200,6 +1200,9 @@  struct intel_dp {
 
 	/* Displayport compliance testing */
 	struct intel_dp_compliance compliance;
+
+	/* Display stream compression testing */
+	bool force_dsc_en;
 };
 
 enum lspcon_vendor {