| Message ID | 20181121110806.32076-2-jmkrzyszt@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port | expand |
* Janusz Krzysztofik <jmkrzyszt@gmail.com> [181121 11:06]: > Data port used by Amstrad Delta NAND driver is actually an OMAP MPUIO > device, already under control of gpio-omap driver. The NAND driver > gets access to the port by ioremapping it and performs read/write > operations. That is done without any proteciton from other users > legally manipulating the port pins over GPIO API. > > The plan is to convert the driver to access the port over GPIO consumer > API. Before that is implemented, the driver can already obtain > exclusive access to the port by requesting an array of its GPIO > descriptors. > > Add respective entries to the NAND GPIO lookup table. > > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> > Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Best to merge this along with the MFD patches: Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 3d191fd52910..30c0d18f372e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -312,7 +312,8 @@ static struct platform_device ams_delta_nand_device = { .resource = ams_delta_nand_resources, }; -#define OMAP_GPIO_LABEL "gpio-0-15" +#define OMAP_GPIO_LABEL "gpio-0-15" +#define OMAP_MPUIO_LABEL "mpuio" static struct gpiod_lookup_table ams_delta_nand_gpio_table = { .table = { @@ -324,6 +325,14 @@ static struct gpiod_lookup_table ams_delta_nand_gpio_table = { GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 1, "data", 1, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 2, "data", 2, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 3, "data", 3, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, "data", 4, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 5, "data", 5, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 6, "data", 6, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 7, "data", 7, 0), { }, }, };